Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: end pour question ??
By:Bill Price
Date: 9/5/2001, 11:54 pm
In Response To: Re: end pour question ?? (Terry)

: Yo Bill,
: Are you meaning to drill the hole, fasten a tube then endpour?
: That would take a bit less resin? yes/no?

: Regards Terry Thx Ben,Ken,Bill& Severne

First, understand I haven't used this technique myself. That said, I believe you would drill the hole, glue in the tube, and then, if necessary, do an end pour. Don't know if the last part is required. Ross Leidy did this on one of his boats, so you might ask him. The link is below.

Bill

Messages In This Thread

end pour question ??
Terry -- 9/5/2001, 10:43 am
Re: end pour question ??
Severne -- 9/5/2001, 7:40 pm
Re: end pour question ??
Bill Price -- 9/5/2001, 6:25 pm
Re: end pour question ??
Terry -- 9/5/2001, 9:14 pm
Re: end pour question ??
Bill Price -- 9/5/2001, 11:54 pm
Re: end pour question ??
Ben Staley -- 9/5/2001, 11:17 am
Re: end pour question ??
Ken Sutherland -- 9/5/2001, 4:26 pm