Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Depth question
By:Don Beale
Date: 8/16/2001, 2:21 pm
In Response To: Depth question (Mike)

The place to look at the measurement is right at the front of the coaming. Add about 3" to the height shown on the nearest station, and you should be covered.

You wanted a bigger window anyway :)

: I am planning on building a kayak this winter (perhaps the Guillemot or Great
: Auk), and the only place I have to work on it is in my basement. We have
: no garage and the boss (aka my wife) says the main floor living room is
: out of the question. My basement windows are rather long, and the opening
: is only 17" high.

: What is the total depth of the average kayak, including hull, deck, cockpit
: combings and everything, totally assembled? Would it be able to fit out my
: window once completed?

: Thanks for the info.

Messages In This Thread

Depth question
Mike -- 8/16/2001, 12:52 pm
No problem
Larry C. -- 8/16/2001, 5:40 pm
Re: and pad the window
Don Beale -- 8/16/2001, 5:22 pm
this time for real
Pete Notman -- 8/16/2001, 5:11 pm
Re: Depth question *NM*
Pete Notman -- 8/16/2001, 5:04 pm
Depth is for submarines :D not yaks
!RUSS -- 8/16/2001, 3:12 pm
Basement advice
Dale Frolander -- 8/16/2001, 2:42 pm
Exhaust fan
Mike -- 8/16/2001, 8:20 pm
But...
Dale Frolander -- 8/17/2001, 1:11 am
Re: Basement advice
addison -- 8/16/2001, 5:33 pm
Re: Depth question
Don Beale -- 8/16/2001, 2:21 pm
Re: Depth question
mike allen -- 8/16/2001, 1:38 pm