Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re:Bending Ply cockpit rim *Pic*
By:Rehd
Date: 8/6/2001, 2:12 am
In Response To: Re: Bending plywood / Polaroid digital ???? (Chris Luneski)

: Rehd,

: I've also set up an album on polaroiddigital.com. As best as I can tell, a
: single photo can be sent with a post, through the auction route, to a site
: like this one. For the entire album to be seen, a user name and password
: must be supplied to whomever you want to view the album. I followed the
: link at the bottom of your post and it asked for user name and password,
: but also indicated the album invitation had expired.

: For putting single images in a post, I have found it to be about as easy as
: it can get.

: Chris Luneski

Hi Chris

Yeh, I got the single thing down O.K.. I was really interested in getting the album up to show. I pretty much disected the site to see if there was a way I could bypass the password stuff and just post an album; No Dice. At least not that I could find. Well, I'll have my Web-Site up after the trip to P.T. as I have all the pictures here and just need to upload them again. Had them and lost them when a Web-Site got erased before we could transfer to my account. Bummer!!!

Here's another pic. from this album showing the use of the bending plywood. My inner cockpit rim is laminated from 4 pieces of the bending ply glued together with epoxy resin. Flexible, but holds it's shape very well.

More Later....

Rehd

Messages In This Thread

Bender plywood
Scott Fitzgerrell -- 8/5/2001, 9:33 am
Re: Bender plywood
scotty -- 8/7/2001, 12:43 pm
Re: Bender plywood
Rehd -- 8/5/2001, 11:02 am
Re: Bender plywood
Scott Fitzgerrell -- 8/5/2001, 11:22 am
Re: Bending plywood / Polaroid digital ???? *Pic*
Rehd -- 8/5/2001, 6:49 pm
Re: Bending plywood / Polaroid digital ????
Chris Luneski -- 8/6/2001, 12:35 am
Re:Bending Ply cockpit rim *Pic*
Rehd -- 8/6/2001, 2:12 am
Re: Bending plywood / Polaroid digital ????
Rehd -- 8/5/2001, 6:52 pm
Re: Bender plywood
Rehd -- 8/5/2001, 2:39 pm