Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: how long do ya wait?
By:Ray Port Angeles
Date: 7/24/2001, 1:30 pm
In Response To: Re: how long do ya wait? (Ross Leidy)

: Sounds like you're considering varnishing the inside prior to joining the
: hull and deck? I suppose you could do that, but you'll end-up having to
: sand some off to do the inside seam and add bulkheads (assuming you use
: the wooden kind). To me, this sounds like too much work, and I'd suggest
: varnishing after the halves are joined. In which case, there's not a big
: rush to varnish the interior. You could do it at your leisure after you've
: paddled a bit.

: As an aside, I've never varnished the inside of any of my kayaks. They just
: don't get much sun in there. There's either a paddler in the way or
: there's a cockpit cover in place. However, I am reconsidering this
: decision in light of the reports by Nick and Jay about pinholes in
: epoxy-only coating leading to water damage. I haven't seen this yet, but I
: don't want to either.

: Ross .
Guys,
I'm considering this also as in my latest boat I am getting gas-out bubbles in the third fill coat, bubbles pop, resulting in a hole.
Ray

Messages In This Thread

how long do ya wait?
tom preska -- 7/23/2001, 8:57 pm
Re: how long do ya wait?
Ross Leidy -- 7/24/2001, 9:24 am
Re: how long do ya wait?
Ray Port Angeles -- 7/24/2001, 1:30 pm
Re: how long do ya wait?
tom preska -- 7/24/2001, 12:43 pm