Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: carving in a hard chine on a stripper
By:Rick Mitchell
Date: 6/25/2001, 8:54 pm
In Response To: carving in a hard chine on a stripper (!RUSS)

: AFter building the hull I steamed the hard
: chne strisp and left them drying in a nailed jig. Flat piece of wiood with
: nails every inch on hte curve. Then I sanded in the chine. Hope yours
: works well

: !RUSS

Rounding the edges of the forms slightly and using no nails or steam seems to work well also.

Rick

Messages In This Thread

Progress Report
Rick Mitchell -- 6/22/2001, 9:40 pm
carving in a hard chine on a stripper
!RUSS -- 6/24/2001, 10:23 pm
Re: carving in a hard chine on a stripper
Rick Mitchell -- 6/25/2001, 8:54 pm
Re: Progress Report
daren neufeld -- 6/23/2001, 12:42 am