Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Visible Glass Pattern?
By:Dale Frolander
Date: 6/1/2001, 2:55 am
In Response To: Re: Visible Glass Pattern? (peter)

: I 'm sure that i wetted it out completely.....using a 3" x 1/8"
: roller
: with lots of pressure.......
: could it be the treatment used to prep the glass for epoxy?
: i noticed that the raw cloth was a bit stiffer in same weight to E glass.
: (the cloth is from US Composites 6522 - 27")

I used E-glass, not S-glass so I don't know about the problems you're having. Maybe Joe is right, you just might not be able to get enough saturation with S-glass.

Messages In This Thread

Visible Glass Pattern?
peter -- 5/30/2001, 4:37 pm
Re: Visible Glass Pattern?
Dale Frolander -- 5/30/2001, 9:17 pm
Re: Visible Glass Pattern?
LeeG -- 5/31/2001, 10:12 am
Re: Visible Glass Pattern?
peter -- 5/31/2001, 12:28 pm
Re: Visible Glass Pattern?
Dale Frolander -- 6/1/2001, 2:55 am
Thanks For Infos !! *NM*
peter -- 6/1/2001, 12:22 pm
Re: Visible Glass Pattern?
Joe Greenley -- 5/31/2001, 4:45 pm
Re: Visible Glass Pattern?
LeeG -- 5/31/2001, 6:02 pm