Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Using Spokeshaves
By:Mary Martha
Date: 10/11/2000, 7:14 am
In Response To: Using Spokeshaves (Ken Finger)

: I started my new kayak last week. The hull is stripped, the staples pulled,
: and most of the outside planed. There are some areas on the hull that the
: plane just won't get due to the curvature. So, after reading Nick's book,
: I decided a spokeshave was the tool to use, and went out and got myself
: one. Well, there were no instructions included in the package, but I gave
: it my best shot. I tried the blades set shallow, deep, and everywhere in
: between. I tried pushing it and pulling it. Unfortunately, the results
: were pretty disappointing - mostly just got a lot of chatter.

: I searched the web for information on how to use this device, but did not
: have any success. The best I found was that it is a very useful tool if
: used properly. Didn't really need a computer to tell me that the best way
: to use it is to use it properly.

: Any information on how to use a spokeshave would be greatly appreciated.

: Thanks in advance,

: Ken

Spokeshaves, in my opinion, are essential. I find them extremely useful in the entire kayak building process, and can save you a lot of time.
I use three different spokeshaves...flat, rounded, and an old one that I found that's totally round that's perfect for those tight curves in Chesapeakes's coaming. Also, they have to be kept very sharp, and cut better if you cut on an angle.
If I were you, I'd practice on a piece of scrap, get a feel for it, because it really is a handy tool to have around.
-Mary Martha

Messages In This Thread

Using Spokeshaves
Ken Finger -- 10/10/2000, 4:26 pm
Re: Using Spokeshaves
David Hanson -- 10/12/2000, 12:20 pm
How I use and set up a Spokeshave
Jason -- 10/11/2000, 3:01 pm
Re: Using Spokeshaves
Mary Martha -- 10/11/2000, 7:14 am
Re: Using Spokeshaves
Ken Finger -- 10/11/2000, 7:28 am
Re: Using Spokeshaves
Nick Schade - Guillemot Kayaks -- 10/11/2000, 7:53 pm
Re: Using Spokeshaves
David Hanson -- 10/10/2000, 4:52 pm
Re: Using Spokeshaves
Smiley Shields -- 10/10/2000, 6:07 pm
Re: Using Spokeshaves
mike nicholson -- 10/10/2000, 8:25 pm
Re: Using Spokeshaves *NM*
Smiley Shields -- 10/10/2000, 5:21 pm