Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

cove and bead
By:Butch
Date: 3/30/2000, 3:17 pm

I am a first time builder and am wondering; will I be ok using strips that aren't cove and bead? also, I am having a tough time finding any 20' cedar boards. Any suggestions? Butch

Messages In This Thread

cove and bead
Butch -- 3/30/2000, 3:17 pm
Grain and single scarfing
mike allen ---} -- 3/31/2000, 4:11 pm
Re: cove and bead
Nick Schade - Guillemot Kayaks -- 3/31/2000, 8:49 am
Re: cove and bead
Edgar Kleindinst -- 3/31/2000, 7:34 am
Re: cove and bead
Kent LeBoutillier -- 3/31/2000, 6:20 am
Re: scarf splicing strips
Dave Houser -- 3/31/2000, 1:57 am
Re: scarf splicing strips
Walter H. Klaus -- 4/2/2000, 8:54 am
Sanding disk
Paul G. Jacobson -- 4/2/2000, 6:46 pm
Re: Sanding disk
Walter H. Klaus -- 4/3/2000, 9:44 pm
Re: Sanding disk
John B. -- 4/2/2000, 7:28 pm
Re: Sanding disk
Paul G. Jacobson -- 4/3/2000, 1:13 pm
Re: Sanding disk
John B. -- 4/3/2000, 7:22 pm
Re: Table Saw Sanding disk Source
Dave Houser -- 4/2/2000, 9:35 pm
Re: Table Saw Sanding disk Source
John B. -- 4/3/2000, 7:48 am
Re: scarf jig
Don Beale -- 3/31/2000, 12:13 pm
Re: scarf jig
Spidey -- 3/31/2000, 3:14 pm
Re: scarf jig
Don Beale -- 4/1/2000, 1:27 am
Re: scarf jig
Spidey -- 4/1/2000, 2:07 am
Re: scarfing jig
Hank -- 3/31/2000, 9:33 am
Re: cove and bead
Paul G. Jacobson -- 3/30/2000, 11:37 pm
Re: THAT explains it!
Spidey -- 3/31/2000, 12:48 am
Re: THAT explains it!
Hank -- 3/31/2000, 9:25 am
Actually, it is more like this
Paul G. Jacobson -- 3/31/2000, 4:42 am
Re: cove and bead
Eric Schade (shearwater Boats) -- 3/30/2000, 7:36 pm
Re: cove and bead
Dean Trexel -- 3/30/2000, 5:13 pm
Re: cove and bead
Vaclav Stejskal -- 3/30/2000, 4:34 pm