Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Final strips
By:Dale Frolander
Date: 1/18/2000, 4:59 am

Joe Greenley (I'm sure you've been through this before), or anyone else who might know.

I was wondering if anyone has any ideas as to how I should hold the final strips in place when I get there since I won't have access to the inside of the kayak. I'm not using any staples and have been holding the strips in place while they dry using LOTS of duct tape.

Here's a picture of the last strip I did on the right hand side (I had access to the inside).

http://frolander.homepage.com/Kayak/Building/Dec9/Dec9_1.jpg

If the picture won't work (Homepage.com doesn't allow linking to the pictures on their site, or something like that), then click on this page and it's the top picture.

http://frolander.homepage.com/Kayak/Building/Dec9/Dec9_1999.htm

Thanks,

Dale

Messages In This Thread

Final strips
Dale Frolander -- 1/18/2000, 4:59 am
Re: Final strips
Greg -- 1/18/2000, 11:22 pm
Re: Final strips
Joe Greenley -- 1/18/2000, 11:18 am
Re: Final strips
Dale Frolander -- 1/18/2000, 2:14 pm
Re: Final strips
Jim Eisenmenger -- 1/18/2000, 7:05 am
Re: Final strips
Dale Frolander -- 1/18/2000, 10:24 am
Making and Dipping of Filler Strips
mike allen -- 1/18/2000, 9:19 pm
Re: Final strips
Kent LeBoutillier -- 1/18/2000, 6:35 am
Re: Final strips
Dale Frolander -- 1/18/2000, 10:11 am
Re: Final strips
Ross Leidy -- 1/18/2000, 10:17 am
Re: Final strips
Dale Frolander -- 1/18/2000, 10:31 am
Re: Final strips
Kent LeBoutillier -- 1/18/2000, 11:52 am