Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

First strip
By:Dean Trexel
Date: 10/15/1999, 6:00 pm

I'm getting ready to lay the first strips on my Outer Island. The instructions call for starting at the shear with a 1/2-width strip. Unfortunately, I don't think I've cut enough 1/2-width strips. I'm building in my apartment living room so taking strips out to be cut will be a bit of a hassle. Does anyone see a problem with starting with a full-width strip on the hull at the shear? The forms are fairly flat on the hull side of the shear, it's on the deck that the 1/2-strips seem most necessary. In referring to Nick's book, it looks like he just starts of with full-width strips. I guess I just need a bit of reinforcement before laying the first strips.

I've e-mailed Jay Babina, but thought I'd post this here, too, since I hope to lay a few strips this weekend and wasn't sure if I'd hear back from Jay on such short notice.

Thanks in advance Dean

B.T.W.-I hope to post some pix of my living room/workshop one of these days...

Messages In This Thread

First strip
Dean Trexel -- 10/15/1999, 6:00 pm
My First strip was full width, no problem
Ed Valley -- 10/18/1999, 4:28 pm
Re: First strip
Greg Steeves -- 10/16/1999, 12:57 am
Re: First strip
Mike Scarborough -- 10/15/1999, 7:09 pm
Re: First strip
Ross Leidy -- 10/16/1999, 12:04 am