I am in hopes someone out there has some suggestions for my situation. I am building an Osprey Std. Last fall I finished the hull and glassed the outside of it. I glued the deck together but cold weather hit before I could go further. I picked back up this spring and finished the outside of the hull. I am ready to glass the inside of the hull. I now find that the deck has "relaxed" along the center seam, and it has become too large for the hull. How to obtain a fix? Osprey says I might have to cut the glue line and reglue and re do the glass reinforement tape. I wonder if I can, with the use of wire get the deck into the right shape and then glue it to the hull. Any thoughts or suggestions would be helpful. Thanx