KBBS Archive 60,000

Re: Strip: Sheer clamps - how fair is fair?

Posted By: Bobby Curtis
Date: Saturday, 2 March 2002, at 4:47 p.m.

In Response To: Strip: Sheer clamps - how fair is fair? (KenC)

Ken

Pull a tight string from bow to stern right down the center of the hull. Duct tape can be used to hold the string at each end. Then go to the region where you suspect wobble in the vertical plane. Measure from the string to the shear clamp on each side. Compare the results. I have done this to determine any differences from each side of the hull to the centerline.

Bobby

Messages In This Thread

Strip: Sheer clamps - how fair is fair?
KenC -- Saturday, 2 March 2002, at 11:46 a.m.

Re: Strip: Sheer clamps - how fair is fair?
Bobby Curtis -- Saturday, 2 March 2002, at 4:47 p.m.

Re: Strip: Sheer clamps - how fair is fair?
Scott Dollmeyer -- Saturday, 2 March 2002, at 6:25 p.m.

Re: Go with your eye! It sees fair! *NM*
Bob -- Saturday, 2 March 2002, at 11:46 p.m.

Re: Strip: Sheer clamps - how fair is fair?
KenC -- Sunday, 3 March 2002, at 10:28 a.m.

Re: Strip: Sheer clamps - how fair is fair?
Chip Sandresky -- Saturday, 2 March 2002, at 11:13 p.m.

KBBS Archive 60,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.