KBBS Archive 60,000

Strip: Planing the Shear Clamp *Pic*

Posted By: Chip Sandresky
Date: Thursday, 28 February 2002, at 12:35 p.m.

Here's a shot of the shear clamp. This is where the round soled spokeshave really comes into its own. Sometimes a flat sole tool wont cut into a concave curve like this. BTW: My shop is never this messy I'm glad I was more carful laying out the forms than these temporary hull supports - that one in the foreground is off by about 3"! I don't know what happened but I'll raise it up sooner or later.

Chip's Web Site

Messages In This Thread

Strip: Planing the Shear Clamp *Pic*
Chip Sandresky -- Thursday, 28 February 2002, at 12:35 p.m.

Re: Strip: Planing the Shear Clamp
Scott E. Davis -- Thursday, 28 February 2002, at 1:16 p.m.

Re: Strip: Planing the Shear Clamp
Chip Sandresky -- Thursday, 28 February 2002, at 1:48 p.m.

Sweet, Very nice *NM*
John Skinner -- Thursday, 28 February 2002, at 11:02 p.m.

KBBS Archive 60,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.