KBBS Archive 50,000

Hatch Lip seal channel

Posted By: Ken Sutherland
Date: Wednesday, 25 July 2001, at 5:33 a.m.

I've made my hatch lips using the One Ocean Kayak method that looked so easy on Ross and Spidey's websites, the process seems to be going well. I used 1/8 X 3/8 neoprene gasket as a mold for the channel and will use 1/4 X 3/8 or 3/8 X 3/8 neoprene for my seal. The question that I have is, how do I get all the foam bits out of the channel in the lip? I've scraped most of the foam out but have a layer stuck to the epoxy. Should I have used a release agent of some sort, do I just need to use more elbow grease, or is there an easy way to remove the residual foam?

Thanks,

Ken

Messages In This Thread

Hatch Lip seal channel
Ken Sutherland -- Wednesday, 25 July 2001, at 5:33 a.m.

Re: Hatch Lip seal channel
Jay Babina -- Wednesday, 25 July 2001, at 8:35 a.m.

Re: Hatch Lip seal channel
Jim Kozel -- Wednesday, 25 July 2001, at 9:27 a.m.

Re: Hatch Lip seal channel
Larry C. -- Wednesday, 25 July 2001, at 12:23 p.m.

Re: Hatch Lip seal channel
Ross Leidy -- Wednesday, 25 July 2001, at 12:50 p.m.

Re: How about a wire wheel?
Don Beale -- Wednesday, 25 July 2001, at 1:59 p.m.

Thanks!!!
Ken Sutherland -- Thursday, 26 July 2001, at 1:29 a.m.

Re: Hatch Lip seal channel
Paul G. Jacobson -- Thursday, 26 July 2001, at 2:59 a.m.

WDITOT
Ken Sutherland -- Thursday, 26 July 2001, at 3:17 a.m.

I T A S M
Paul G. Jacobson -- Friday, 27 July 2001, at 3:48 a.m.

KBBS Archive 50,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.