KBBS Archive 50,000

Gutter less car rack holder designed by Gorden *Pic*

Posted By: John Monfoe
Date: Friday, 20 July 2001, at 5:38 a.m.

This is what my car rack prototype piece of metal looks like that slips into the door slot of my car and will bolt through the nearly right angle bend at around a 45 degree angle into the wood side rails to pull the rack down and out tight to the car roof. Gorden described this last March and looks to be a good cleap solution to the expensive racks. The clip is only 2 1/2" high and won't be too intrusive looking. I plan on running two 1 1/8" outside dia. round conduit pipes across the car and into the oak side rails. On that will fit 4 Yakima Kayak Saddles I got off of E-bay.

John

Messages In This Thread

Gutter less car rack holder designed by Gorden *Pic*
John Monfoe -- Friday, 20 July 2001, at 5:38 a.m.

That's great!
Tony B -- Friday, 20 July 2001, at 8:41 a.m.

Re: Should work well
Shawn Baker -- Friday, 20 July 2001, at 10:46 a.m.

Re: Should work well
John Monfoe -- Saturday, 21 July 2001, at 6:52 a.m.

Re: Gutter less car rack holder designed by Gorden
rick M -- Friday, 20 July 2001, at 9:00 p.m.

Re: Gutter less car rack holder designed by Gorden
Bill Boyd -- Saturday, 21 July 2001, at 1:20 a.m.

Re: Gutter less car rack holder designed by Gorden
John Monfoe -- Saturday, 21 July 2001, at 6:37 a.m.

Re: Gutter less car rack holder designed by Gorden
Bill Boyd -- Saturday, 21 July 2001, at 10:19 a.m.

Re: Gutter less car rack holder designed by Gorden
John Monfoe -- Saturday, 21 July 2001, at 7:00 a.m.

KBBS Archive 50,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.