KBBS Archive 50,000

Re: New Glue - Wood Molding Glue

Posted By: Ross Leidy
Date: Thursday, 19 July 2001, at 2:34 p.m.

In Response To: Re: New Glue - Wood Molding Glue (Severne)

I think temperature effects should be considered. You don't want joints to creep and strain the glass due to heat softening the glue. In fact, I think that should be the primary consideration when choosing a glue (for this application, of course).

Ross

: That was my thinking when I posted the message--spot glueing, glass and epoxy
: is what counts and if waterproofness of the glue is a problem then you
: have more problems than the glue. I am unconvinced by the temperature
: deficiency at 150 degrees. If my deck is that hot, I will get 2nd degree
: burns-- and, again, after the glass/epoxy is in place, the glue doesn't
: count.

Messages In This Thread

Re: New Glue - Wood Molding Glue
Jim Kozel -- Wednesday, 18 July 2001, at 4:19 p.m.

Re: New Glue - Wood Molding Glue - Technical
Jim Kozel -- Wednesday, 18 July 2001, at 4:32 p.m.

Re: New Glue - Wood Molding Glue
Brian Nystrom -- Thursday, 19 July 2001, at 1:07 p.m.

Re: New Glue - Wood Molding Glue
Severne -- Thursday, 19 July 2001, at 2:15 p.m.

Re: New Glue - Wood Molding Glue
Ross Leidy -- Thursday, 19 July 2001, at 2:34 p.m.

Re: New Glue - Wood Molding Glue
Jim Kozel -- Thursday, 19 July 2001, at 3:53 p.m.

Re: New Glue - Wood Molding Glue
Brian Nystrom -- Friday, 20 July 2001, at 1:15 p.m.

Stripping without glue
Ted Henry -- Friday, 20 July 2001, at 2:12 p.m.

KBBS Archive 50,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.