KBBS Archive 40,000

Re: Sanding between Varnish Coats

Posted By: Don Flowers
Date: Tuesday, 30 January 2001, at 8:25 p.m.

In Response To: Sanding between Varnish Coats (Todd Fry)

Having very little patience and a friend who was an autobody man, we thinned out the varnish a bit and sprayed on all the coats in one day with no sanding at all. Finish was good on three boats we did that way and no problems. I would want someone better on the paint gun than myself but it was fast and took far less varnish than we estimated or than the building instructions had estimated. If possible that's the way I would go (will be doing three more that way when the weather warms). (it did leave the shop a sticky mess but that's another story.)
good luck
don

Messages In This Thread

Sanding between Varnish Coats
Todd Fry -- Sunday, 28 January 2001, at 9:23 p.m.

Re: Sanding between Varnish Coats
Rob Macks -- Monday, 29 January 2001, at 10:13 a.m.

Re: Sanding between Varnish Coats
Nick Schade - Guillemot Kayaks -- Monday, 29 January 2001, at 1:22 p.m.

Satin Varnish
Pete Rudie -- Monday, 29 January 2001, at 11:42 p.m.

Re: Sanding between Varnish Coats
Don Flowers -- Tuesday, 30 January 2001, at 8:25 p.m.

Re: Sanding between Varnish Coats
daren -- Tuesday, 30 January 2001, at 9:06 p.m.

spraying
Don Flowers -- Tuesday, 30 January 2001, at 11:11 p.m.

Re: VOC's
Ian Johnston -- Wednesday, 31 January 2001, at 3:24 a.m.

KBBS Archive 40,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.