Welcome to the Kayak Building Bulletin Board Archive sponsored by Guillemot Kayaks. To post a new message go to the Kayak Building Bulletin Board.

KBBS Archive 40,000

Message Index

1 *NM*
Bill Price -- Friday, 26 January 2001, at 7:03 p.m.
8 messages -- Newest posted Sunday, 28 January 2001, at 4:38 a.m.

Re: Pogie Patterns
Shawn Baker -- Friday, 26 January 2001, at 7:04 p.m.
1 message

Ratz! *NM*
Rehd -- Friday, 26 January 2001, at 7:04 p.m.
5 messages -- Newest posted Saturday, 27 January 2001, at 7:55 p.m.

Re: Starting on Deck
Les Corley -- Friday, 26 January 2001, at 7:05 p.m.
1 message

Re: for a cutting board...
Shawn Baker -- Friday, 26 January 2001, at 7:06 p.m.
5 messages -- Newest posted Sunday, 28 January 2001, at 4:05 p.m.

Re: How does Basswood finish?
Shawn Baker -- Friday, 26 January 2001, at 7:06 p.m.
7 messages -- Newest posted Monday, 29 January 2001, at 6:30 p.m.

Re: Buy a good respirator!! *NM*
Shawn Baker -- Friday, 26 January 2001, at 7:06 p.m.
1 message

Cinch It Up Shawn O.T.
Rehd -- Friday, 26 January 2001, at 7:11 p.m.
2 messages -- Newest posted Friday, 26 January 2001, at 7:13 p.m.

Re: Basswood a/k/a Linden
George Cushing -- Friday, 26 January 2001, at 7:19 p.m.
1 message

Re: Pogie Patterns *Pic*
Bill Price -- Friday, 26 January 2001, at 7:19 p.m.
1 message

re-finishing guillemot?
Sam McFadden -- Friday, 26 January 2001, at 7:58 p.m.
1 message

Re: Use that squeegee
Ben Staley -- Friday, 26 January 2001, at 8:00 p.m.
2 messages -- Newest posted Saturday, 27 January 2001, at 8:50 a.m.

Re: Bill Gates should be so lucky!
George Cushing -- Friday, 26 January 2001, at 8:16 p.m.
2 messages -- Newest posted Friday, 26 January 2001, at 9:34 p.m.

Now that was a mouthful
Tom Kurth -- Friday, 26 January 2001, at 8:21 p.m.
1 message

Re: Ohhh, Double Action!
George Cushing -- Friday, 26 January 2001, at 8:33 p.m.
1 message

Re: Duck Tape Trick
George Cushing -- Friday, 26 January 2001, at 8:49 p.m.
1 message

Re: Plastic Geewiz Broke
George Cushing -- Friday, 26 January 2001, at 8:58 p.m.
1 message

Guillemot - 32lbs
Dwight -- Friday, 26 January 2001, at 8:59 p.m.
1 message

Re: Who you Callin' a Sap?
George Cushing -- Friday, 26 January 2001, at 10:00 p.m.
1 message

Righto, old chap
Pete Rudie -- Friday, 26 January 2001, at 10:56 p.m.
1 message

Any plans for a sit-on-top kayak?
TF -- Friday, 26 January 2001, at 11:15 p.m.
9 messages -- Newest posted Thursday, 1 February 2001, at 7:09 p.m.

Re: Pogie Patterns
Pete Rudie -- Friday, 26 January 2001, at 11:16 p.m.
2 messages -- Newest posted Saturday, 27 January 2001, at 11:00 p.m.

Basswood source
Jody -- Saturday, 27 January 2001, at 12:09 a.m.
1 message

new epoxy
Don Beale -- Saturday, 27 January 2001, at 12:25 a.m.
7 messages -- Newest posted Saturday, 27 January 2001, at 4:12 p.m.

Nice hull
Dale Frolander -- Saturday, 27 January 2001, at 2:43 a.m.
3 messages -- Newest posted Saturday, 27 January 2001, at 6:45 a.m.

Re: Suggestions
John Monfoe -- Saturday, 27 January 2001, at 4:19 a.m.
1 message

Thank You All
Mike Scarborough -- Saturday, 27 January 2001, at 9:46 a.m.
1 message

Re: Big Guys and the Night Heron
Pete Strand -- Saturday, 27 January 2001, at 10:09 a.m.
1 message

Looking Good, John! *NM*
Steve -- Saturday, 27 January 2001, at 10:17 a.m.
1 message

Re: Hypalon vs. Polyurethane
Pete Strand -- Saturday, 27 January 2001, at 10:20 a.m.
1 message

Re: Recessed deck fittings *Pic*
Eric Schade (shearwater boats) -- Saturday, 27 January 2001, at 10:23 a.m.
1 message

GL Launch
Ray Port Angeles -- Saturday, 27 January 2001, at 11:57 a.m.
28 messages -- Newest posted Tuesday, 30 January 2001, at 10:56 a.m.

Re: Starting on Deck
Richard Boyle -- Saturday, 27 January 2001, at 12:15 p.m.
1 message

Deck & Haul Alignment Blocks *Pic*
John Monfoe -- Saturday, 27 January 2001, at 1:36 p.m.
9 messages -- Newest posted Thursday, 1 February 2001, at 8:38 p.m.

Re: Starting on Deck
Bob Deutsch -- Saturday, 27 January 2001, at 7:10 p.m.
4 messages -- Newest posted Monday, 29 January 2001, at 4:47 a.m.

Re: Basswood?
Russ -- Saturday, 27 January 2001, at 8:46 p.m.
1 message

new builder has question
chris l walter -- Saturday, 27 January 2001, at 9:03 p.m.
7 messages -- Newest posted Sunday, 28 January 2001, at 2:02 p.m.

Re: I stand corrected
Don Beale -- Saturday, 27 January 2001, at 9:49 p.m.
1 message

psyche
daren -- Sunday, 28 January 2001, at 1:35 a.m.
2 messages -- Newest posted Sunday, 28 January 2001, at 7:07 p.m.

Re: Another Siamese Joke?
George Cushing -- Sunday, 28 January 2001, at 5:22 a.m.
1 message

Bonding coaming tape to deck
Jim P. -- Sunday, 28 January 2001, at 8:36 a.m.
6 messages -- Newest posted Monday, 29 January 2001, at 8:38 a.m.

Question about trucking a sailboat
Russ -- Sunday, 28 January 2001, at 11:20 a.m.
10 messages -- Newest posted Friday, 2 February 2001, at 6:46 a.m.

Re: Basswood? Bending Branches paddles
Grant Goltz -- Sunday, 28 January 2001, at 11:59 a.m.
1 message

Re: new builder has question
Jeff Fine -- Sunday, 28 January 2001, at 1:44 p.m.
1 message

Finish on System Three
Mark Clark -- Sunday, 28 January 2001, at 2:22 p.m.
5 messages -- Newest posted Monday, 29 January 2001, at 10:18 a.m.

george cushing & fibra tape
brett the hitman hart -- Sunday, 28 January 2001, at 2:58 p.m.
9 messages -- Newest posted Saturday, 3 February 2001, at 9:52 p.m.

Paddle question
Don Campbell -- Sunday, 28 January 2001, at 4:10 p.m.
2 messages -- Newest posted Sunday, 28 January 2001, at 8:58 p.m.

Re: source for cedar?
Don Flowers -- Sunday, 28 January 2001, at 5:42 p.m.
1 message

pictures(s) yahoo! *Pic*
brett the hitman hart -- Sunday, 28 January 2001, at 8:27 p.m.
2 messages -- Newest posted Monday, 29 January 2001, at 5:40 a.m.

one more for the road *NM* *Pic*
brett the hitman hart -- Sunday, 28 January 2001, at 8:38 p.m.
1 message

Sanding between Varnish Coats
Todd Fry -- Sunday, 28 January 2001, at 9:23 p.m.
8 messages -- Newest posted Wednesday, 31 January 2001, at 3:24 a.m.

Bandsaw Or Scroll Saw?
James Clack -- Monday, 29 January 2001, at 12:50 a.m.
9 messages -- Newest posted Friday, 2 February 2001, at 1:19 a.m.

Bulkhead template
Brad Grimm -- Monday, 29 January 2001, at 2:31 a.m.
2 messages -- Newest posted Monday, 29 January 2001, at 4:18 a.m.

Coaming Base Radius.
John Monfoe -- Monday, 29 January 2001, at 5:29 a.m.
3 messages -- Newest posted Tuesday, 30 January 2001, at 5:40 a.m.

Deck lines
Ed Walshe - Dublin -- Monday, 29 January 2001, at 7:59 a.m.
18 messages -- Newest posted Friday, 2 February 2001, at 8:23 p.m.

Outer Island deck inlay *Pic*
Ross Leidy -- Monday, 29 January 2001, at 9:40 a.m.
22 messages -- Newest posted Saturday, 3 February 2001, at 3:23 p.m.

plan reading - please help
RBURGER -- Monday, 29 January 2001, at 10:10 a.m.
6 messages -- Newest posted Tuesday, 30 January 2001, at 2:18 p.m.

Alittle more on Fort Walton Beach Kayaking Tragedy
Ronie -- Monday, 29 January 2001, at 10:38 a.m.
4 messages -- Newest posted Tuesday, 30 January 2001, at 11:23 p.m.

Re: George, what happened to your dark Titebond? *NM*
Grant Goltz -- Monday, 29 January 2001, at 10:55 a.m.
1 message

building strip
Scott E. Davis -- Monday, 29 January 2001, at 2:05 p.m.
7 messages -- Newest posted Tuesday, 30 January 2001, at 8:04 p.m.

Spokeshave, Flat or Round?
Mike Jensen -- Monday, 29 January 2001, at 3:42 p.m.
4 messages -- Newest posted Tuesday, 30 January 2001, at 8:53 p.m.

first time builder *Pic*
Angela Watson -- Monday, 29 January 2001, at 8:05 p.m.
16 messages -- Newest posted Thursday, 8 February 2001, at 12:31 p.m.

aluminum strongback
Tom -- Monday, 29 January 2001, at 8:54 p.m.
12 messages -- Newest posted Saturday, 10 February 2001, at 8:26 p.m.

Error in Grebe offsets
Grant Goltz -- Monday, 29 January 2001, at 11:23 p.m.
1 message

Bulkhead on Pygmy
Steve M -- Monday, 29 January 2001, at 11:28 p.m.
5 messages -- Newest posted Tuesday, 30 January 2001, at 12:35 p.m.

TS Blade for ripping strips?
Doug Miller -- Tuesday, 30 January 2001, at 12:07 a.m.
6 messages -- Newest posted Tuesday, 30 January 2001, at 5:43 p.m.

Slow Epoxy and seams
Scott Hicks -- Tuesday, 30 January 2001, at 12:57 a.m.
19 messages -- Newest posted Thursday, 1 February 2001, at 7:11 p.m.

Bungee diameter
Andreas Albat -- Tuesday, 30 January 2001, at 12:20 p.m.
3 messages -- Newest posted Wednesday, 31 January 2001, at 3:59 p.m.

stems and design questions
Scott E. Davis -- Tuesday, 30 January 2001, at 1:40 p.m.
3 messages -- Newest posted Tuesday, 30 January 2001, at 10:19 p.m.

Anyone tried this epoxy? (US Composites)
Arlen -- Tuesday, 30 January 2001, at 2:13 p.m.
1 message

which kayak to build
Ralph J. Blake -- Tuesday, 30 January 2001, at 3:53 p.m.
8 messages -- Newest posted Tuesday, 6 February 2001, at 12:24 p.m.

sheer species
mark -- Tuesday, 30 January 2001, at 7:57 p.m.
3 messages -- Newest posted Wednesday, 31 January 2001, at 4:49 p.m.

Bead and cove machining yields
Dwight -- Tuesday, 30 January 2001, at 9:40 p.m.
21 messages -- Newest posted Friday, 2 February 2001, at 4:02 p.m.

Wavelength Magazine
Kent LeBoutillier -- Wednesday, 31 January 2001, at 6:00 a.m.
1 message

Help me
Christopher Paterson -- Wednesday, 31 January 2001, at 6:46 a.m.
7 messages -- Newest posted Thursday, 1 February 2001, at 8:08 p.m.

Adk Guide Boat
Brian -- Wednesday, 31 January 2001, at 8:34 a.m.
20 messages -- Newest posted Friday, 2 February 2001, at 12:35 p.m.

Wood indentification
Pete Rudie -- Wednesday, 31 January 2001, at 2:14 p.m.
7 messages -- Newest posted Thursday, 1 February 2001, at 6:22 p.m.

Palm Sander or Orbital
Scott Hicks -- Wednesday, 31 January 2001, at 4:51 p.m.
13 messages -- Newest posted Wednesday, 7 February 2001, at 5:08 a.m.

Re: Good point
Don Beale -- Wednesday, 31 January 2001, at 7:48 p.m.
1 message

Re: Just a question.
Spidey -- Wednesday, 31 January 2001, at 8:26 p.m.
3 messages -- Newest posted Thursday, 1 February 2001, at 4:53 a.m.

Coaming
John Monfoe -- Thursday, 1 February 2001, at 5:12 a.m.
12 messages -- Newest posted Saturday, 3 February 2001, at 6:59 a.m.

WANTED Georgian Bay owners in WA, thanks to Ray
Stan Snapp -- Thursday, 1 February 2001, at 12:37 p.m.
2 messages -- Newest posted Thursday, 1 February 2001, at 9:40 p.m.

Edge clamps *Pic*
Pete Rudie -- Thursday, 1 February 2001, at 1:15 p.m.
10 messages -- Newest posted Tuesday, 6 February 2001, at 8:07 p.m.

Cable ties *Pic*
Pete Rudie -- Thursday, 1 February 2001, at 1:22 p.m.
1 message

am I using the wrong kind of sandpaper?
daniel -- Thursday, 1 February 2001, at 3:35 p.m.
10 messages -- Newest posted Monday, 5 February 2001, at 11:48 a.m.

Fear of Fairing
Richard Boyle -- Thursday, 1 February 2001, at 6:37 p.m.
7 messages -- Newest posted Sunday, 4 February 2001, at 3:31 p.m.

getting started
chris l walter -- Thursday, 1 February 2001, at 7:40 p.m.
1 message

need info about these boats
Greg Root -- Thursday, 1 February 2001, at 7:55 p.m.
5 messages -- Newest posted Monday, 5 February 2001, at 12:42 p.m.

Dog yak
Don -- Thursday, 1 February 2001, at 10:46 p.m.
11 messages -- Newest posted Thursday, 15 February 2001, at 10:44 p.m.

Staining strips
Rick -- Thursday, 1 February 2001, at 11:37 p.m.
11 messages -- Newest posted Sunday, 18 February 2001, at 8:55 p.m.

L.Loon Shootingstar
Doug -- Friday, 2 February 2001, at 12:33 a.m.
3 messages -- Newest posted Friday, 2 February 2001, at 9:21 a.m.

Wood Gold Mine--again
John Monfoe -- Friday, 2 February 2001, at 5:28 a.m.
11 messages -- Newest posted Monday, 5 February 2001, at 2:28 p.m.

Looking for plans!!!
Colin Chaloux -- Friday, 2 February 2001, at 12:14 p.m.
29 messages -- Newest posted Thursday, 8 February 2001, at 10:49 a.m.

Re: 1 ply or 2?
Geo. Cushing -- Friday, 2 February 2001, at 12:18 p.m.
1 message

supply questions. Raka, thermarest,fillers
mark -- Friday, 2 February 2001, at 4:22 p.m.
4 messages -- Newest posted Sunday, 4 February 2001, at 8:29 p.m.

southern climate and epoxy curing
Malcolm Schweizer -- Friday, 2 February 2001, at 4:57 p.m.
4 messages -- Newest posted Sunday, 4 February 2001, at 11:19 p.m.

solid ends?
armin wendt -- Friday, 2 February 2001, at 6:53 p.m.
9 messages -- Newest posted Monday, 5 February 2001, at 5:04 a.m.

meet marshall *Pic*
brett the hitman hart -- Friday, 2 February 2001, at 8:57 p.m.
3 messages -- Newest posted Tuesday, 6 February 2001, at 7:14 p.m.

1000 Miles in S & G
Brandon Nelson -- Saturday, 3 February 2001, at 3:00 a.m.
3 messages -- Newest posted Saturday, 3 February 2001, at 12:57 p.m.

Kayak Builders of So Calif website moved
Jim Gabriel -- Saturday, 3 February 2001, at 11:34 a.m.
2 messages -- Newest posted Saturday, 3 February 2001, at 9:31 p.m.

Status of my Redfish Silver
Jim Sailer -- Saturday, 3 February 2001, at 3:28 p.m.
11 messages -- Newest posted Wednesday, 7 February 2001, at 12:11 p.m.

Double Helix
Angela Watson -- Saturday, 3 February 2001, at 6:14 p.m.
3 messages -- Newest posted Monday, 5 February 2001, at 2:10 p.m.

George all those shop tips count!
Russ -- Saturday, 3 February 2001, at 10:07 p.m.
2 messages -- Newest posted Saturday, 3 February 2001, at 11:43 p.m.

stressed glass - white spots
steve pollack -- Sunday, 4 February 2001, at 3:33 p.m.
2 messages -- Newest posted Monday, 5 February 2001, at 12:21 p.m.

West Marine Varnish?
Doug -- Monday, 5 February 2001, at 10:36 a.m.
2 messages -- Newest posted Monday, 5 February 2001, at 11:07 a.m.

hatch covers
Ed -- Monday, 5 February 2001, at 1:36 p.m.
4 messages -- Newest posted Wednesday, 7 February 2001, at 6:04 p.m.

vacuum technology & squirt
Ondra -- Monday, 5 February 2001, at 1:46 p.m.
3 messages -- Newest posted Monday, 5 February 2001, at 8:59 p.m.

All the (a la) Cart Drawings:
mike allen -- Monday, 5 February 2001, at 2:05 p.m.
1 message

Painting the hull of a new-build
Tom -- Monday, 5 February 2001, at 3:21 p.m.
9 messages -- Newest posted Wednesday, 7 February 2001, at 5:16 p.m.

Penetrating Epoxy
JG -- Monday, 5 February 2001, at 3:24 p.m.
2 messages -- Newest posted Monday, 5 February 2001, at 5:36 p.m.

STEM MOLD SIZE ?
RBURGER -- Monday, 5 February 2001, at 4:27 p.m.
3 messages -- Newest posted Tuesday, 6 February 2001, at 5:43 p.m.

Roof rack
Tom Kurth -- Monday, 5 February 2001, at 8:18 p.m.
1 message

toy/tool
daren -- Monday, 5 February 2001, at 11:44 p.m.
6 messages -- Newest posted Wednesday, 7 February 2001, at 5:25 p.m.

Layup schedule
Scott Rockey -- Monday, 5 February 2001, at 11:51 p.m.
4 messages -- Newest posted Tuesday, 6 February 2001, at 10:20 a.m.

Bent Shaft
Don Beale -- Tuesday, 6 February 2001, at 1:01 a.m.
10 messages -- Newest posted Wednesday, 7 February 2001, at 9:29 a.m.

Night Heron Size
Colin -- Tuesday, 6 February 2001, at 9:46 a.m.
2 messages -- Newest posted Tuesday, 6 February 2001, at 4:00 p.m.

Coho Notch Not
Rod Beittel -- Tuesday, 6 February 2001, at 1:37 p.m.
3 messages -- Newest posted Thursday, 8 February 2001, at 6:38 p.m.

Sources of Bead and Cove Strips in CA
Ken Blanton -- Tuesday, 6 February 2001, at 6:01 p.m.
4 messages -- Newest posted Tuesday, 6 February 2001, at 11:07 p.m.

Photo-Point -Instruction / No Excuses anymore!!
Rehd -- Tuesday, 6 February 2001, at 7:00 p.m.
24 messages -- Newest posted Friday, 9 February 2001, at 1:47 p.m.

Re: Bent Shaft
Kent LeBoutillier -- Wednesday, 7 February 2001, at 6:24 a.m.
1 message

Stem forms on Guillemot Expedition
Elliott Wagner -- Wednesday, 7 February 2001, at 9:19 a.m.
6 messages -- Newest posted Thursday, 8 February 2001, at 12:48 p.m.

stich and glue Baidarka
sage -- Wednesday, 7 February 2001, at 11:39 a.m.
5 messages -- Newest posted Monday, 19 February 2001, at 6:49 a.m.

"Third Hand" Jig *Pic*
Pete Rudie -- Wednesday, 7 February 2001, at 12:52 p.m.
13 messages -- Newest posted Thursday, 8 February 2001, at 6:33 p.m.

kayaks *Pic*
Les Corley -- Wednesday, 7 February 2001, at 5:07 p.m.
17 messages -- Newest posted Thursday, 8 February 2001, at 4:19 p.m.

Hey Russ, I'm finaly on the BBS
rick morgan -- Wednesday, 7 February 2001, at 6:52 p.m.
2 messages -- Newest posted Wednesday, 7 February 2001, at 8:07 p.m.

About to Fiberglass a Stripper 1st time
Arthur -- Thursday, 8 February 2001, at 4:13 a.m.
50 messages -- Newest posted Tuesday, 20 February 2001, at 10:53 p.m.

radial arm for strip ripping?
Greg Root -- Thursday, 8 February 2001, at 9:21 a.m.
7 messages -- Newest posted Sunday, 11 February 2001, at 2:46 a.m.

Paint over varnish?
Mike McCrea -- Thursday, 8 February 2001, at 9:43 a.m.
2 messages -- Newest posted Thursday, 8 February 2001, at 1:53 p.m.

Compass Recess *Pic*
Ross Leidy -- Thursday, 8 February 2001, at 10:50 a.m.
26 messages -- Newest posted Tuesday, 20 February 2001, at 6:19 a.m.

Night Heron: how much wood for hull?
sage -- Thursday, 8 February 2001, at 11:12 a.m.
3 messages -- Newest posted Friday, 9 February 2001, at 7:19 p.m.

where to find radiant panel heaters?
daniel -- Thursday, 8 February 2001, at 3:43 p.m.
11 messages -- Newest posted Sunday, 11 February 2001, at 9:33 p.m.

Revarnishing and sanding
Jonathan Pew -- Thursday, 8 February 2001, at 4:01 p.m.
2 messages -- Newest posted Thursday, 8 February 2001, at 7:29 p.m.

Paddle blades
Don Campbell -- Thursday, 8 February 2001, at 4:39 p.m.
2 messages -- Newest posted Friday, 9 February 2001, at 12:49 p.m.

Roses for my wife` *Pic*
Les Corley -- Thursday, 8 February 2001, at 7:44 p.m.
5 messages -- Newest posted Sunday, 11 February 2001, at 9:11 a.m.

What to do with glue residue?
tom preska -- Thursday, 8 February 2001, at 7:44 p.m.
6 messages -- Newest posted Sunday, 11 February 2001, at 3:04 p.m.

Re: 9oz is a lot
Arthur -- Thursday, 8 February 2001, at 9:14 p.m.
1 message

Scaling or Modifying and Existing Plan
Ken Blanton -- Thursday, 8 February 2001, at 9:57 p.m.
4 messages -- Newest posted Friday, 9 February 2001, at 7:16 p.m.

My 100 hr. kayak *Pic*
Les Corley -- Friday, 9 February 2001, at 1:30 p.m.
5 messages -- Newest posted Sunday, 11 February 2001, at 12:06 p.m.

Anyone building a Great Auk Double?
Lance Alldrin -- Friday, 9 February 2001, at 4:21 p.m.
2 messages -- Newest posted Friday, 9 February 2001, at 10:35 p.m.

Rodentia *Pic*
Pete Rudie -- Friday, 9 February 2001, at 6:26 p.m.
6 messages -- Newest posted Saturday, 10 February 2001, at 8:36 p.m.

Info on varnishing...
Mark Woodhead -- Friday, 9 February 2001, at 11:16 p.m.
5 messages -- Newest posted Saturday, 10 February 2001, at 11:36 a.m.

Hatch edges?
John Monfoe -- Saturday, 10 February 2001, at 5:08 a.m.
7 messages -- Newest posted Sunday, 11 February 2001, at 3:12 a.m.

greenland paddle
risto -- Saturday, 10 February 2001, at 7:50 a.m.
22 messages -- Newest posted Friday, 16 February 2001, at 9:19 a.m.

Cheekplate question
Liz Leedham -- Saturday, 10 February 2001, at 9:26 a.m.
6 messages -- Newest posted Monday, 12 February 2001, at 5:08 p.m.

recycling~~~ OT *Pic*
Larry C. -- Saturday, 10 February 2001, at 6:57 p.m.
8 messages -- Newest posted Monday, 12 February 2001, at 4:25 p.m.

Re: Time=Fun
Spidey -- Saturday, 10 February 2001, at 7:12 p.m.
1 message

helped needed with layout of bow and stern mold
John Caelles -- Saturday, 10 February 2001, at 7:46 p.m.
4 messages -- Newest posted Tuesday, 13 February 2001, at 1:56 p.m.

displacement?
daren -- Saturday, 10 February 2001, at 8:32 p.m.
10 messages -- Newest posted Monday, 12 February 2001, at 9:55 p.m.

SOF Update *Pic*
Bill Price -- Saturday, 10 February 2001, at 9:41 p.m.
25 messages -- Newest posted Wednesday, 14 February 2001, at 12:14 a.m.

Stapless Deck Construction
Don B. -- Saturday, 10 February 2001, at 10:28 p.m.
7 messages -- Newest posted Sunday, 11 February 2001, at 10:59 p.m.

can-o-worms
Rick -- Sunday, 11 February 2001, at 7:39 a.m.
9 messages -- Newest posted Monday, 12 February 2001, at 11:37 p.m.

making lead ducks *Pic*
Ron Hagedorn -- Sunday, 11 February 2001, at 1:41 p.m.
13 messages -- Newest posted Thursday, 15 February 2001, at 8:52 p.m.

Luan Source
bob -- Sunday, 11 February 2001, at 2:27 p.m.
5 messages -- Newest posted Monday, 12 February 2001, at 2:20 p.m.

wood prices
Brian McCully -- Sunday, 11 February 2001, at 6:33 p.m.
2 messages -- Newest posted Monday, 12 February 2001, at 1:50 p.m.

sheer strip
Mike Teusink -- Sunday, 11 February 2001, at 7:42 p.m.
4 messages -- Newest posted Sunday, 11 February 2001, at 10:50 p.m.

SOF with dowels?
Jerry Hayes -- Sunday, 11 February 2001, at 11:11 p.m.
8 messages -- Newest posted Wednesday, 14 February 2001, at 12:40 p.m.

Another one hits the water *Pic*
Nick W -- Monday, 12 February 2001, at 12:00 a.m.
19 messages -- Newest posted Thursday, 15 February 2001, at 12:11 a.m.

kayak building
MURRAY SCHWENNING -- Monday, 12 February 2001, at 12:47 a.m.
2 messages -- Newest posted Monday, 12 February 2001, at 11:17 a.m.

Hard chined v. round bottom
Chris -- Monday, 12 February 2001, at 2:24 a.m.
18 messages -- Newest posted Friday, 16 February 2001, at 10:02 a.m.

types of plywood acceptable
Chris -- Monday, 12 February 2001, at 2:27 a.m.
5 messages -- Newest posted Tuesday, 13 February 2001, at 9:30 p.m.

project idea for...
Don Beale -- Monday, 12 February 2001, at 11:47 a.m.
3 messages -- Newest posted Saturday, 17 February 2001, at 12:54 a.m.

Another method
mike allen -- Monday, 12 February 2001, at 4:07 p.m.
1 message

Re: project idea for...
Geo. Cushing -- Monday, 12 February 2001, at 4:42 p.m.
1 message

Re: Some points
Arthur -- Monday, 12 February 2001, at 4:57 p.m.
6 messages -- Newest posted Tuesday, 13 February 2001, at 9:07 p.m.

combing
Ed Andrews -- Monday, 12 February 2001, at 5:12 p.m.
2 messages -- Newest posted Tuesday, 13 February 2001, at 2:36 a.m.

little bitty wood plane (cheap) *Pic*
Ron Hagedorn -- Monday, 12 February 2001, at 7:06 p.m.
6 messages -- Newest posted Tuesday, 13 February 2001, at 4:38 p.m.

spray skirt for john munfoe
brett (the hitman hart)onnink -- Monday, 12 February 2001, at 7:13 p.m.
13 messages -- Newest posted Saturday, 17 February 2001, at 8:08 a.m.

sags in my precoat
Jim P. -- Monday, 12 February 2001, at 10:03 p.m.
2 messages -- Newest posted Tuesday, 13 February 2001, at 10:51 p.m.

The Oystercatcher
Ken Blanton -- Tuesday, 13 February 2001, at 6:04 a.m.
2 messages -- Newest posted Friday, 16 February 2001, at 7:00 p.m.

Re: details of construction
Annoyed Again -- Tuesday, 13 February 2001, at 8:48 a.m.
1 message

Spray Skirt for Pygmy Arctic Tern
Tom -- Tuesday, 13 February 2001, at 11:45 a.m.
9 messages -- Newest posted Friday, 16 February 2001, at 3:54 p.m.

Flush mount hatch question
Ben Staley -- Tuesday, 13 February 2001, at 1:11 p.m.
8 messages -- Newest posted Thursday, 15 February 2001, at 5:46 p.m.

knee braces
Angela Watson -- Tuesday, 13 February 2001, at 1:19 p.m.
7 messages -- Newest posted Wednesday, 14 February 2001, at 1:12 p.m.

decorative strips
Kurt -- Tuesday, 13 February 2001, at 2:15 p.m.
5 messages -- Newest posted Wednesday, 14 February 2001, at 3:59 a.m.

Re: i should have said ...
Jeff Fine -- Tuesday, 13 February 2001, at 4:29 p.m.
1 message

Fein v. Porter-Cable Shop Vac Opinions?
Steve K -- Tuesday, 13 February 2001, at 5:49 p.m.
11 messages -- Newest posted Wednesday, 14 February 2001, at 10:24 a.m.

what raka rasin should i buy
marc machado -- Tuesday, 13 February 2001, at 8:49 p.m.
4 messages -- Newest posted Thursday, 15 February 2001, at 10:29 a.m.

Non-stupid hollow Greenland paddle
David Dick -- Tuesday, 13 February 2001, at 10:17 p.m.
11 messages -- Newest posted Thursday, 15 February 2001, at 9:59 a.m.

"V" Day Experiment ...Gone Bad .., O.T. *Pic*
Rehd -- Wednesday, 14 February 2001, at 4:52 a.m.
15 messages -- Newest posted Thursday, 15 February 2001, at 8:10 p.m.

Spine?
Terry Hanson -- Wednesday, 14 February 2001, at 10:58 a.m.
6 messages -- Newest posted Thursday, 15 February 2001, at 10:24 p.m.

Use of red oak - any experiences appreciated
mark -- Wednesday, 14 February 2001, at 6:11 p.m.
6 messages -- Newest posted Saturday, 17 February 2001, at 10:22 a.m.

Right, George. Let's see engineering data on THAT *NM*
Pete Rudie -- Wednesday, 14 February 2001, at 6:41 p.m.
1 message

Re: "assembly line"
Bill Price -- Wednesday, 14 February 2001, at 7:26 p.m.
4 messages -- Newest posted Thursday, 15 February 2001, at 1:40 p.m.

Varnishing alternatives?
Brad Grimm -- Thursday, 15 February 2001, at 2:37 a.m.
13 messages -- Newest posted Tuesday, 20 February 2001, at 3:41 p.m.

You are quite correct.
Paul G. Jacobson -- Thursday, 15 February 2001, at 3:24 a.m.
1 message

String Marking Of Strongback
Elliott -- Thursday, 15 February 2001, at 7:35 a.m.
23 messages -- Newest posted Monday, 19 February 2001, at 10:38 p.m.

FIBERGLASS REPAINTING
Paul Alpert -- Thursday, 15 February 2001, at 10:10 a.m.
5 messages -- Newest posted Friday, 16 February 2001, at 6:21 p.m.

re: G. Rbts
Charley Dean -- Thursday, 15 February 2001, at 12:55 p.m.
8 messages -- Newest posted Monday, 19 February 2001, at 12:55 p.m.

rehd!
brett (the hitman hart)onnink -- Thursday, 15 February 2001, at 2:47 p.m.
8 messages -- Newest posted Friday, 16 February 2001, at 5:50 p.m.

Re: Use of red oak - any experiences appreciated
Al Gunther -- Thursday, 15 February 2001, at 3:34 p.m.
1 message

Symposium in Grand Maris
Dick -- Thursday, 15 February 2001, at 5:40 p.m.
3 messages -- Newest posted Friday, 16 February 2001, at 11:26 a.m.

Ugly Subject
JG -- Thursday, 15 February 2001, at 6:40 p.m.
6 messages -- Newest posted Saturday, 17 February 2001, at 1:50 a.m.

Re: where to find radiant panel heaters?
skip -- Thursday, 15 February 2001, at 7:30 p.m.
1 message

Industrial Formulators
Don -- Thursday, 15 February 2001, at 9:06 p.m.
12 messages -- Newest posted Monday, 19 February 2001, at 8:19 p.m.

making coaming in place :/ *Pic*
brett (the hitman hart)onnink -- Thursday, 15 February 2001, at 9:55 p.m.
3 messages -- Newest posted Friday, 16 February 2001, at 7:02 a.m.

Re: G. Rbts
Charley Dean -- Thursday, 15 February 2001, at 11:00 p.m.
1 message

Forget vinyl spray on minicell . . .
Spidey -- Friday, 16 February 2001, at 1:13 a.m.
3 messages -- Newest posted Saturday, 17 February 2001, at 6:54 p.m.

custom sprayskirt
Phil -- Friday, 16 February 2001, at 1:44 a.m.
3 messages -- Newest posted Saturday, 17 February 2001, at 8:41 a.m.

Bending....M.W. Style...Hands Free *Pic*
Rehd -- Friday, 16 February 2001, at 3:40 a.m.
8 messages -- Newest posted Saturday, 17 February 2001, at 11:20 p.m.

S & G taping the Fillets 1,2 or 3 layer3
Pau Pinder -- Friday, 16 February 2001, at 11:05 a.m.
5 messages -- Newest posted Friday, 16 February 2001, at 10:35 p.m.

Drying time after steaming
Andreas Albat -- Friday, 16 February 2001, at 11:29 a.m.
9 messages -- Newest posted Sunday, 18 February 2001, at 3:08 p.m.

built-in pump
David -- Friday, 16 February 2001, at 12:06 p.m.
10 messages -- Newest posted Friday, 16 February 2001, at 9:35 p.m.

carrying kayaks on a roof rack
KD Newbie -- Friday, 16 February 2001, at 12:39 p.m.
8 messages -- Newest posted Sunday, 18 February 2001, at 8:34 p.m.

Re: 3 "proofs" - Mickey Mouse Engineering?
risto -- Friday, 16 February 2001, at 12:41 p.m.
1 message

Boatbuilder's "Meet at the Beach"
Rob Macks -- Friday, 16 February 2001, at 4:53 p.m.
21 messages -- Newest posted Wednesday, 21 February 2001, at 6:22 a.m.

Re: 3 "proofs"
Pete Rudie -- Friday, 16 February 2001, at 5:57 p.m.
1 message

Re: 3 "proofs"
Pete Rudie -- Friday, 16 February 2001, at 5:58 p.m.
1 message

Re: G. Rbts
Lee -- Friday, 16 February 2001, at 7:13 p.m.
1 message

Strip Built Melonseed Plans?
BruceK -- Friday, 16 February 2001, at 7:53 p.m.
8 messages -- Newest posted Tuesday, 20 February 2001, at 4:47 a.m.

Re: Whatever
Shawn Baker -- Friday, 16 February 2001, at 9:37 p.m.
9 messages -- Newest posted Monday, 19 February 2001, at 12:55 p.m.

Putz walrus - delurking at last!
John Pugh -- Friday, 16 February 2001, at 10:11 p.m.
20 messages -- Newest posted Sunday, 11 March 2001, at 6:07 p.m.

205 hardner vs 207 hardner
John Gray -- Friday, 16 February 2001, at 11:33 p.m.
3 messages -- Newest posted Saturday, 17 February 2001, at 11:49 a.m.

fill coat problem
Don Campbell -- Saturday, 17 February 2001, at 1:11 a.m.
3 messages -- Newest posted Saturday, 17 February 2001, at 6:53 p.m.

The Schade,e Goltz Fitting (1of 2) *Pic*
mike allen ---> -- Saturday, 17 February 2001, at 1:52 a.m.
10 messages -- Newest posted Monday, 19 February 2001, at 8:14 p.m.

Inlays *Pic*
John Monfoe -- Saturday, 17 February 2001, at 5:18 a.m.
12 messages -- Newest posted Tuesday, 20 February 2001, at 5:45 a.m.

oil?
daren -- Saturday, 17 February 2001, at 10:41 a.m.
15 messages -- Newest posted Monday, 19 February 2001, at 3:00 p.m.

Say "good bye" to epoxy problems *Pic*
Pete Rudie -- Saturday, 17 February 2001, at 4:22 p.m.
4 messages -- Newest posted Saturday, 17 February 2001, at 7:33 p.m.

Re: 3 "proofs"
Pete Rudie -- Saturday, 17 February 2001, at 5:02 p.m.
1 message

Foot pump mounted on minicell bulkhead?
Jim P. -- Saturday, 17 February 2001, at 8:42 p.m.
1 message

Strong Backs
Ron Crooks -- Saturday, 17 February 2001, at 8:57 p.m.
19 messages -- Newest posted Tuesday, 20 February 2001, at 2:43 p.m.

Greenland paddle weights (was hollow core)
Greg Stamer -- Saturday, 17 February 2001, at 11:21 p.m.
17 messages -- Newest posted Thursday, 22 February 2001, at 6:51 p.m.

A lesson to be patient when glassing...
Ricci -- Sunday, 18 February 2001, at 3:49 a.m.
3 messages -- Newest posted Monday, 19 February 2001, at 12:04 a.m.

squaring cleats *Pic*
Elliott Wagner -- Sunday, 18 February 2001, at 9:37 a.m.
8 messages -- Newest posted Sunday, 18 February 2001, at 9:13 p.m.

strongback and form progress *Pic*
Elliott Wagner -- Sunday, 18 February 2001, at 9:54 a.m.
1 message

Minicell Backrest
Todd Fry -- Sunday, 18 February 2001, at 10:36 a.m.
8 messages -- Newest posted Thursday, 22 February 2001, at 1:35 a.m.

looking for space in Central OR
Shawn -- Sunday, 18 February 2001, at 12:28 p.m.
2 messages -- Newest posted Sunday, 18 February 2001, at 2:57 p.m.

17 foot Micmac *Pic*
Elliott Wagner -- Sunday, 18 February 2001, at 5:26 p.m.
4 messages -- Newest posted Tuesday, 20 February 2001, at 4:23 a.m.

Filling small gaps and pin holes
Steve -- Sunday, 18 February 2001, at 6:31 p.m.
12 messages -- Newest posted Tuesday, 20 February 2001, at 11:29 a.m.

Where can I buy a seat and a rudder.
Frank Olsen -- Monday, 19 February 2001, at 7:20 a.m.
4 messages -- Newest posted Tuesday, 20 February 2001, at 12:00 p.m.

model kayak
Anthony Trevellick -- Monday, 19 February 2001, at 11:01 a.m.
4 messages -- Newest posted Thursday, 1 March 2001, at 7:00 p.m.

Re: I agree with the engineering.
risto -- Monday, 19 February 2001, at 1:05 p.m.
1 message

interior stem forms on expedition single
Elliott Wagner -- Monday, 19 February 2001, at 3:39 p.m.
3 messages -- Newest posted Tuesday, 20 February 2001, at 7:47 a.m.

Surf Kayak Designed and Built
Duane Strosaker -- Monday, 19 February 2001, at 3:42 p.m.
3 messages -- Newest posted Tuesday, 20 February 2001, at 8:33 p.m.

Deck to Hull joint, how much lip is ok?
Ben Staley -- Monday, 19 February 2001, at 5:44 p.m.
10 messages -- Newest posted Tuesday, 20 February 2001, at 6:07 p.m.

A step forward
Sam McFadden -- Monday, 19 February 2001, at 9:11 p.m.
6 messages -- Newest posted Sunday, 25 February 2001, at 11:01 p.m.

Re: I agree with the engineering.
Dale Frolander -- Monday, 19 February 2001, at 9:41 p.m.
1 message

Staple-less in Seattle *Pic*
Pete Rudie -- Monday, 19 February 2001, at 10:27 p.m.
23 messages -- Newest posted Thursday, 22 February 2001, at 4:51 a.m.

Super Glue & Accelerator *Pic*
John Monfoe -- Tuesday, 20 February 2001, at 7:54 a.m.
3 messages -- Newest posted Wednesday, 21 February 2001, at 4:39 a.m.

North Star ready for glassing *Pic*
Steve -- Tuesday, 20 February 2001, at 11:03 a.m.
18 messages -- Newest posted Sunday, 25 February 2001, at 3:39 p.m.

testing
risto -- Tuesday, 20 February 2001, at 11:05 a.m.
1 message

kayak sailing
Rick -- Tuesday, 20 February 2001, at 2:02 p.m.
5 messages -- Newest posted Wednesday, 21 February 2001, at 4:14 p.m.

Re: OT re: G. Rbts - new BBS convention?
Charley Dean -- Tuesday, 20 February 2001, at 3:26 p.m.
1 message

FYI: E-Glass & S-Glass
Paul Lund -- Tuesday, 20 February 2001, at 3:56 p.m.
3 messages -- Newest posted Wednesday, 21 February 2001, at 4:56 p.m.

Outriggers
Basil W Hansen -- Tuesday, 20 February 2001, at 4:27 p.m.
2 messages -- Newest posted Thursday, 22 February 2001, at 12:07 p.m.

Varnish Questions
David -- Tuesday, 20 February 2001, at 5:00 p.m.
3 messages -- Newest posted Wednesday, 21 February 2001, at 3:29 p.m.

ROS, palm or pistol grip? variable speed?
Richard Boyle -- Tuesday, 20 February 2001, at 5:50 p.m.
5 messages -- Newest posted Wednesday, 21 February 2001, at 7:35 a.m.

CLC Chesepeak vs. Pigmy Q. Charlote?
bob -- Tuesday, 20 February 2001, at 9:08 p.m.
4 messages -- Newest posted Thursday, 22 February 2001, at 12:18 p.m.

Strongback revisited one more time *Pic*
Ron Hagedorn -- Tuesday, 20 February 2001, at 10:06 p.m.
5 messages -- Newest posted Wednesday, 21 February 2001, at 5:52 a.m.

Re: Rudder Source
Pete Rudie -- Tuesday, 20 February 2001, at 10:18 p.m.
1 message

Mac's response on the strip Barneget Sneak Box *Pic*
Roger Nuffer -- Tuesday, 20 February 2001, at 10:42 p.m.
2 messages -- Newest posted Tuesday, 20 February 2001, at 10:48 p.m.

stemform *Pic*
Elliott Wagner -- Wednesday, 21 February 2001, at 7:53 a.m.
3 messages -- Newest posted Wednesday, 21 February 2001, at 8:35 a.m.

Meet at the beach day and conflicts
Nick Schade - Guillemot Kayaks -- Wednesday, 21 February 2001, at 9:15 a.m.
6 messages -- Newest posted Thursday, 22 February 2001, at 11:47 p.m.

hatch gasket material
peter -- Wednesday, 21 February 2001, at 11:18 a.m.
2 messages -- Newest posted Wednesday, 21 February 2001, at 4:42 p.m.

Source for 60" 4 oz. FG Cloth?
Don B. -- Wednesday, 21 February 2001, at 12:53 p.m.
4 messages -- Newest posted Thursday, 22 February 2001, at 4:29 a.m.

Will the wife kill me for glassing in the house?
Scott Hicks -- Wednesday, 21 February 2001, at 1:32 p.m.
32 messages -- Newest posted Sunday, 25 February 2001, at 11:07 a.m.

Meet at the Beach web page
Nick Schade - Guillemot Kayaks -- Wednesday, 21 February 2001, at 3:31 p.m.
22 messages -- Newest posted Friday, 23 February 2001, at 3:23 p.m.

Spring loaded thingamajigs for paddles
David -- Wednesday, 21 February 2001, at 3:43 p.m.
4 messages -- Newest posted Thursday, 22 February 2001, at 4:03 a.m.

Help *Pic*
John Monfoe -- Wednesday, 21 February 2001, at 4:36 p.m.
8 messages -- Newest posted Thursday, 22 February 2001, at 11:05 a.m.

plywood coaming question for s&g
mark -- Wednesday, 21 February 2001, at 6:48 p.m.
1 message

fiberglass whitewater kayak
Steven Adams -- Wednesday, 21 February 2001, at 8:52 p.m.
2 messages -- Newest posted Thursday, 22 February 2001, at 6:12 a.m.

bow and stern entry lines and reglassing
Dave Knott -- Wednesday, 21 February 2001, at 9:30 p.m.
1 message

artwork for decal
Steve -- Wednesday, 21 February 2001, at 9:34 p.m.
5 messages -- Newest posted Thursday, 22 February 2001, at 3:31 a.m.

Try Doing *This* with Staples . . . (OT) *Pic*
Spidey -- Wednesday, 21 February 2001, at 10:27 p.m.
27 messages -- Newest posted Friday, 2 March 2001, at 8:22 p.m.

Strip Ripping Thingamajig *Pic*
Ron Hagedorn -- Wednesday, 21 February 2001, at 10:32 p.m.
13 messages -- Newest posted Friday, 23 February 2001, at 9:01 a.m.

Re: plywood coaming question for s&g
Bill Jankowski -- Wednesday, 21 February 2001, at 11:18 p.m.
1 message

? about kayak materials
Dave King -- Thursday, 22 February 2001, at 12:11 a.m.
3 messages -- Newest posted Friday, 23 February 2001, at 6:59 a.m.

Re: MSDS doesn't mention death
Ross Leidy -- Thursday, 22 February 2001, at 10:45 a.m.
1 message

Re: You SOB
Pete Rudie -- Thursday, 22 February 2001, at 11:23 a.m.
1 message

Re: You SOB
Richard Boyle -- Thursday, 22 February 2001, at 11:24 a.m.
1 message

Re: You SOB
Bill Price -- Thursday, 22 February 2001, at 2:57 p.m.
1 message

Re: "sticks and stones..."
Ross Leidy -- Thursday, 22 February 2001, at 3:14 p.m.
5 messages -- Newest posted Sunday, 25 February 2001, at 11:14 p.m.

getting started
chuck -- Thursday, 22 February 2001, at 6:30 p.m.
2 messages -- Newest posted Thursday, 22 February 2001, at 8:51 p.m.

Re: You SOB
Chris Moore -- Thursday, 22 February 2001, at 6:31 p.m.
2 messages -- Newest posted Thursday, 22 February 2001, at 11:32 p.m.

Re: You SOB
Dale Frolander -- Thursday, 22 February 2001, at 10:00 p.m.
6 messages -- Newest posted Sunday, 25 February 2001, at 7:09 a.m.

Re: You SOB
bob -- Thursday, 22 February 2001, at 11:28 p.m.
1 message

George is in tune with this, for the wrong reason
Paul G. Jacobson -- Thursday, 22 February 2001, at 11:48 p.m.
1 message

Resin/Cloth Deterioration??
Rehd -- Friday, 23 February 2001, at 12:45 a.m.
8 messages -- Newest posted Tuesday, 27 February 2001, at 12:34 a.m.

Sanding the glued seams
Scott -- Friday, 23 February 2001, at 9:15 a.m.
3 messages -- Newest posted Friday, 23 February 2001, at 3:42 p.m.

skin-on-frame plans
Stig Amundsen -- Friday, 23 February 2001, at 9:24 a.m.
21 messages -- Newest posted Thursday, 1 March 2001, at 5:37 p.m.

Polyurethane glue update *Pic*
Pete Rudie -- Friday, 23 February 2001, at 11:22 a.m.
10 messages -- Newest posted Friday, 23 February 2001, at 9:00 p.m.

Staple-less in MN advice
Andy Miller -- Friday, 23 February 2001, at 1:46 p.m.
4 messages -- Newest posted Saturday, 24 February 2001, at 10:16 a.m.

Another clamping gizmo. Don't watch, Rob 8-) *Pic*
Pete Rudie -- Friday, 23 February 2001, at 2:21 p.m.
32 messages -- Newest posted Wednesday, 28 February 2001, at 1:34 p.m.

Open question for Rob Macks
Pete Rudie -- Friday, 23 February 2001, at 3:00 p.m.
4 messages -- Newest posted Monday, 26 February 2001, at 8:35 p.m.

j monfoe's instant glue *Pic*
brett -- Friday, 23 February 2001, at 6:54 p.m.
4 messages -- Newest posted Monday, 26 February 2001, at 4:19 a.m.

This one's for Rehd *Pic*
Liz Leedham -- Friday, 23 February 2001, at 7:06 p.m.
3 messages -- Newest posted Saturday, 24 February 2001, at 8:11 a.m.

Re: Resin/Cloth Deterioration??
Rehd -- Friday, 23 February 2001, at 8:00 p.m.
1 message

LD50
Jay Roberts -- Friday, 23 February 2001, at 9:06 p.m.
1 message

A little slightly off topic help needed
Jay Roberts -- Friday, 23 February 2001, at 9:15 p.m.
6 messages -- Newest posted Sunday, 25 February 2001, at 5:42 p.m.

Re: Longer response
Dale Frolander -- Friday, 23 February 2001, at 9:49 p.m.
1 message

Oh No It happened again
Elliott Wagner -- Saturday, 24 February 2001, at 8:58 a.m.
3 messages -- Newest posted Sunday, 25 February 2001, at 11:25 a.m.

Footbraces
Jim Martin -- Saturday, 24 February 2001, at 1:07 p.m.
37 messages -- Newest posted Wednesday, 28 February 2001, at 10:21 a.m.

Re: I apologize to you.
Dale Frolander -- Saturday, 24 February 2001, at 2:19 p.m.
1 message

Spring Run progress *Pic*
Liz Leedham -- Saturday, 24 February 2001, at 2:42 p.m.
16 messages -- Newest posted Monday, 26 February 2001, at 7:41 a.m.

cockpit size/knee bracing
phil mclarnan -- Saturday, 24 February 2001, at 3:34 p.m.
2 messages -- Newest posted Sunday, 25 February 2001, at 11:12 a.m.

Where can I buy System 3 Epoxy....
Brion -- Saturday, 24 February 2001, at 3:37 p.m.
11 messages -- Newest posted Sunday, 25 February 2001, at 12:36 a.m.

Glueing deck on Osprey Std....Help...
Brion -- Sunday, 25 February 2001, at 12:45 a.m.
8 messages -- Newest posted Wednesday, 28 February 2001, at 12:31 a.m.

epoxy/paint/varnish
edgar -- Sunday, 25 February 2001, at 5:06 p.m.
2 messages -- Newest posted Sunday, 25 February 2001, at 6:16 p.m.

Re: vuja de
Lee -- Sunday, 25 February 2001, at 10:39 p.m.
1 message

5-minute glue didnt stick
Don Beale -- Monday, 26 February 2001, at 12:46 a.m.
6 messages -- Newest posted Tuesday, 27 February 2001, at 8:55 a.m.

If you e-mailed me for plans or anything . . .
Paul G. Jacobson -- Monday, 26 February 2001, at 4:50 a.m.
2 messages -- Newest posted Tuesday, 27 February 2001, at 8:43 a.m.

Expedition Update *Pic*
Elliott Wagner -- Monday, 26 February 2001, at 9:15 a.m.
2 messages -- Newest posted Monday, 26 February 2001, at 12:33 p.m.

Not minimizing individual responses
Chris Moore -- Monday, 26 February 2001, at 10:19 a.m.
1 message

Finally! A use for staples *Pic*
Pete Rudie -- Monday, 26 February 2001, at 12:25 p.m.
6 messages -- Newest posted Tuesday, 27 February 2001, at 8:20 p.m.

oops,sorry rehd *Pic*
Elliott Wagner -- Monday, 26 February 2001, at 12:27 p.m.
3 messages -- Newest posted Monday, 26 February 2001, at 7:00 p.m.

Like Sawing a Lady in Half!
Rob Macks -- Monday, 26 February 2001, at 3:52 p.m.
41 messages -- Newest posted Thursday, 1 March 2001, at 9:31 a.m.

4 coats of resin to fill the cloth
Arthur -- Monday, 26 February 2001, at 10:27 p.m.
7 messages -- Newest posted Tuesday, 27 February 2001, at 10:25 p.m.

Introduction, and Help request
john doerter -- Tuesday, 27 February 2001, at 3:15 a.m.
16 messages -- Newest posted Monday, 5 March 2001, at 3:06 a.m.

TUF Carve & TUF Fill *Pic*
John Monfoe -- Tuesday, 27 February 2001, at 6:38 a.m.
5 messages -- Newest posted Thursday, 1 March 2001, at 3:47 a.m.

can varnish go bad?
daniel -- Tuesday, 27 February 2001, at 12:12 p.m.
3 messages -- Newest posted Friday, 2 March 2001, at 3:32 p.m.

OK to store boats in sunlight?
daniel -- Tuesday, 27 February 2001, at 12:22 p.m.
4 messages -- Newest posted Wednesday, 28 February 2001, at 5:39 a.m.

section/mold alignment method
Scott E. Davis -- Tuesday, 27 February 2001, at 1:52 p.m.
6 messages -- Newest posted Friday, 2 March 2001, at 1:42 p.m.

North Star construction details
Doug K. -- Tuesday, 27 February 2001, at 10:14 p.m.
4 messages -- Newest posted Thursday, 1 March 2001, at 12:58 a.m.

Another shop tip
Pete Rudie -- Tuesday, 27 February 2001, at 10:51 p.m.
1 message

Another shop tip
Pete Rudie -- Tuesday, 27 February 2001, at 10:59 p.m.
2 messages -- Newest posted Wednesday, 28 February 2001, at 10:46 a.m.

Ignoble use of fine design
MikeWhy -- Wednesday, 28 February 2001, at 9:02 a.m.
5 messages -- Newest posted Thursday, 1 March 2001, at 8:43 p.m.

Glassing Tip Needed
Bill Dumont -- Wednesday, 28 February 2001, at 12:22 p.m.
28 messages -- Newest posted Sunday, 4 March 2001, at 2:49 p.m.

Vacuum bagging website
Ross Leidy -- Wednesday, 28 February 2001, at 4:01 p.m.
3 messages -- Newest posted Thursday, 1 March 2001, at 9:58 a.m.

You Folks O.K. Up Wa. Way ? O.T.
Rehd -- Thursday, 1 March 2001, at 11:10 a.m.
13 messages -- Newest posted Monday, 5 March 2001, at 9:28 p.m.

Re: FOOD FIGHT!
Rob Macks -- Thursday, 1 March 2001, at 12:50 p.m.
1 message

Very Newbie question
Pete C -- Thursday, 1 March 2001, at 2:11 p.m.
11 messages -- Newest posted Saturday, 3 March 2001, at 8:02 p.m.

Diamond in the rough *Pic*
David Hanson -- Thursday, 1 March 2001, at 3:08 p.m.
22 messages -- Newest posted Tuesday, 6 March 2001, at 3:36 p.m.

Stain and filler
Bruce H. -- Thursday, 1 March 2001, at 6:15 p.m.
4 messages -- Newest posted Friday, 2 March 2001, at 6:31 p.m.

aol6.0 contamination?
Scotty -- Thursday, 1 March 2001, at 7:10 p.m.
8 messages -- Newest posted Sunday, 4 March 2001, at 10:56 a.m.

epoxy
john -- Thursday, 1 March 2001, at 11:26 p.m.
7 messages -- Newest posted Saturday, 3 March 2001, at 4:08 a.m.

Gorilla Glue for stripping
Alex Warren -- Friday, 2 March 2001, at 11:45 a.m.
7 messages -- Newest posted Saturday, 3 March 2001, at 8:29 a.m.

Cutting board finishes
Elliott Wagner -- Friday, 2 March 2001, at 9:58 p.m.
14 messages -- Newest posted Tuesday, 6 March 2001, at 9:57 p.m.

aliphatic resin
Elliott Wagner -- Friday, 2 March 2001, at 10:07 p.m.
2 messages -- Newest posted Sunday, 4 March 2001, at 1:12 p.m.

Flexure versus tension/compression?
MikeWhy -- Friday, 2 March 2001, at 10:57 p.m.
2 messages -- Newest posted Saturday, 3 March 2001, at 4:03 p.m.

A Random SOF building idea
john doerter -- Friday, 2 March 2001, at 11:29 p.m.
7 messages -- Newest posted Monday, 5 March 2001, at 2:11 a.m.

Brads instead of staples?
MikeWhy -- Saturday, 3 March 2001, at 8:54 a.m.
13 messages -- Newest posted Tuesday, 6 March 2001, at 1:01 a.m.

Ben's Guillemot hits the water!!
Ben Staley -- Saturday, 3 March 2001, at 5:45 p.m.
18 messages -- Newest posted Tuesday, 6 March 2001, at 12:54 p.m.

Hull Glassed today
Steve -- Saturday, 3 March 2001, at 6:52 p.m.
1 message

Come on, George
Sam McFadden -- Saturday, 3 March 2001, at 9:19 p.m.
1 message

Found squirt boat mold, help is needed...
Matt Harris -- Saturday, 3 March 2001, at 10:29 p.m.
6 messages -- Newest posted Thursday, 8 March 2001, at 11:45 p.m.

Does Guillemot need skeg ???
Ron Wiebe -- Saturday, 3 March 2001, at 11:02 p.m.
9 messages -- Newest posted Monday, 12 March 2001, at 9:11 a.m.

Roof Rack Question
John Monfoe -- Sunday, 4 March 2001, at 4:43 a.m.
25 messages -- Newest posted Wednesday, 14 March 2001, at 5:04 a.m.

Glass Strands in first coat
Steve -- Sunday, 4 March 2001, at 9:10 a.m.
5 messages -- Newest posted Monday, 5 March 2001, at 1:03 p.m.

wwheeuuuuu! smells good!
brett (the hitman hart)onnink -- Sunday, 4 March 2001, at 7:26 p.m.
4 messages -- Newest posted Sunday, 4 March 2001, at 10:03 p.m.

I think the horse is dead
Sam McFadden -- Sunday, 4 March 2001, at 8:05 p.m.
1 message

Does epoxy bond to acrylic (plexiglass)?
Robb -- Sunday, 4 March 2001, at 9:40 p.m.
6 messages -- Newest posted Tuesday, 6 March 2001, at 3:54 a.m.

parking lot syndrome
daniel -- Sunday, 4 March 2001, at 10:15 p.m.
17 messages -- Newest posted Thursday, 8 March 2001, at 5:28 p.m.

coaming rim *Pic*
brett (the hitman hart)onnink -- Sunday, 4 March 2001, at 10:32 p.m.
3 messages -- Newest posted Monday, 5 March 2001, at 4:22 a.m.

epoxy
Brett -- Sunday, 4 March 2001, at 10:38 p.m.
3 messages -- Newest posted Monday, 5 March 2001, at 12:53 p.m.

2nd try: whhheeeww! smells good.
brett (the hitman hart)onnink -- Sunday, 4 March 2001, at 10:49 p.m.
1 message

Measuring error?
john doerter -- Monday, 5 March 2001, at 2:27 a.m.
2 messages -- Newest posted Monday, 5 March 2001, at 11:09 a.m.

Forgive me father Nick for I have sinned
Ben Staley -- Monday, 5 March 2001, at 11:40 a.m.
18 messages -- Newest posted Tuesday, 6 March 2001, at 1:19 p.m.

Greenland Padle Shaft Shape
Chris Casazza -- Monday, 5 March 2001, at 12:09 p.m.
15 messages -- Newest posted Saturday, 10 March 2001, at 8:11 a.m.

1/8" VS 3/16" ROLLERS
Scott -- Monday, 5 March 2001, at 12:10 p.m.
6 messages -- Newest posted Monday, 5 March 2001, at 8:02 p.m.

Best fiber orientation?
Doug Kuik -- Monday, 5 March 2001, at 2:40 p.m.
7 messages -- Newest posted Wednesday, 7 March 2001, at 12:50 a.m.

My Very Last Wooden Flute Post (OT)
Spidey -- Monday, 5 March 2001, at 11:02 p.m.
5 messages -- Newest posted Wednesday, 7 March 2001, at 3:29 p.m.

Pock marks after 4th epoxy coat?
Ed -- Tuesday, 6 March 2001, at 8:25 a.m.
3 messages -- Newest posted Tuesday, 6 March 2001, at 11:35 a.m.

Clip Art
Craig Doyle -- Tuesday, 6 March 2001, at 8:43 a.m.
1 message

Compass recess update *Pic*
Ross Leidy -- Tuesday, 6 March 2001, at 9:29 a.m.
18 messages -- Newest posted Saturday, 17 March 2001, at 5:17 a.m.

Strip deck on S&G hull
Dave Kreiton -- Tuesday, 6 March 2001, at 10:23 a.m.
16 messages -- Newest posted Saturday, 10 March 2001, at 6:59 p.m.

baidarka ribs, keelson needed?
stephen -- Tuesday, 6 March 2001, at 10:39 a.m.
14 messages -- Newest posted Saturday, 10 March 2001, at 2:24 a.m.

Re: Nothing
Elliott Wagner -- Tuesday, 6 March 2001, at 10:49 a.m.
2 messages -- Newest posted Tuesday, 6 March 2001, at 10:02 p.m.

NO TUB STAINS
Greg Hicks -- Tuesday, 6 March 2001, at 12:42 p.m.
1 message

Troubles with Satin Glass
Al Gunther -- Tuesday, 6 March 2001, at 1:40 p.m.
3 messages -- Newest posted Tuesday, 6 March 2001, at 3:11 p.m.

Level Floor
Wesley Gross -- Tuesday, 6 March 2001, at 2:58 p.m.
6 messages -- Newest posted Tuesday, 6 March 2001, at 10:08 p.m.

Re: Troubles with Satin Glass
Al Gunther -- Tuesday, 6 March 2001, at 3:21 p.m.
2 messages -- Newest posted Tuesday, 6 March 2001, at 4:36 p.m.

Thanks George, hate it when that happens *NM*
David Hanson -- Tuesday, 6 March 2001, at 4:30 p.m.
1 message

Feathered edges and first fill coat.
Steve -- Tuesday, 6 March 2001, at 5:53 p.m.
3 messages -- Newest posted Tuesday, 6 March 2001, at 11:18 p.m.

stripping expedition single stems, Help
Elliott Wagner -- Tuesday, 6 March 2001, at 6:31 p.m.
4 messages -- Newest posted Thursday, 8 March 2001, at 2:08 a.m.

canoe mast step
j -- Tuesday, 6 March 2001, at 7:42 p.m.
6 messages -- Newest posted Wednesday, 7 March 2001, at 11:52 p.m.

Okoume Plywood
Steve M -- Tuesday, 6 March 2001, at 7:56 p.m.
4 messages -- Newest posted Tuesday, 6 March 2001, at 10:44 p.m.

How precisely lined up do the forms have to be?
Allison -- Tuesday, 6 March 2001, at 8:23 p.m.
10 messages -- Newest posted Thursday, 8 March 2001, at 1:44 a.m.

Okoume Plywood
Steve M -- Tuesday, 6 March 2001, at 8:44 p.m.
1 message

skeg.....yes or no?
joe s. -- Tuesday, 6 March 2001, at 9:05 p.m.
2 messages -- Newest posted Wednesday, 7 March 2001, at 10:57 a.m.

ebay glass
Ross Leidy -- Wednesday, 7 March 2001, at 10:19 a.m.
3 messages -- Newest posted Wednesday, 7 March 2001, at 10:50 a.m.

Satin Glass - the two word answer
Al Gunther -- Wednesday, 7 March 2001, at 10:47 a.m.
23 messages -- Newest posted Tuesday, 13 March 2001, at 11:10 a.m.

Re: Troubles with Satin Glass
Dan Lindberg -- Wednesday, 7 March 2001, at 1:46 p.m.
1 message

Woodenboat Osprey Triple Plans
Ross Sieber -- Wednesday, 7 March 2001, at 4:39 p.m.
1 message

Haul/Deck Gap. *Pic*
John Monfoe -- Wednesday, 7 March 2001, at 5:05 p.m.
11 messages -- Newest posted Saturday, 10 March 2001, at 4:49 a.m.

endpour timing
Ben Staley -- Wednesday, 7 March 2001, at 6:12 p.m.
33 messages -- Newest posted Saturday, 10 March 2001, at 12:19 a.m.

Need wood for stems
Curt -- Wednesday, 7 March 2001, at 7:41 p.m.
3 messages -- Newest posted Friday, 9 March 2001, at 9:23 a.m.

canoe seat caning advice
Mike Snell -- Wednesday, 7 March 2001, at 8:50 p.m.
11 messages -- Newest posted Friday, 9 March 2001, at 9:00 p.m.

Progress and question *Pic*
Bill Price -- Thursday, 8 March 2001, at 2:01 a.m.
22 messages -- Newest posted Friday, 9 March 2001, at 2:26 p.m.

Re:
Dean Trexel -- Thursday, 8 March 2001, at 9:42 a.m.
1 message

Stern Glass Overlap
Scott -- Thursday, 8 March 2001, at 9:51 a.m.
2 messages -- Newest posted Thursday, 8 March 2001, at 10:22 a.m.

Thanks Rob!
Byron Lawrence -- Thursday, 8 March 2001, at 10:49 a.m.
2 messages -- Newest posted Thursday, 8 March 2001, at 7:56 p.m.

S&G GUILLEMOT
Tony -- Thursday, 8 March 2001, at 10:51 a.m.
1 message

Box Beam Warped
Ronnie -- Thursday, 8 March 2001, at 12:03 p.m.
13 messages -- Newest posted Saturday, 10 March 2001, at 7:03 p.m.

Baidarka-builder Harvey Golden to speak in Seattle
Shawn Baker -- Thursday, 8 March 2001, at 12:17 p.m.
1 message

East Coast Canoe and Kayak Festival
Ronnie -- Thursday, 8 March 2001, at 12:18 p.m.
1 message

Footpeg mounts redux
Scott Fitzgerrell -- Thursday, 8 March 2001, at 2:32 p.m.
6 messages -- Newest posted Tuesday, 5 June 2001, at 2:45 p.m.

Joubert okoume any good?
Stacy Reeves -- Thursday, 8 March 2001, at 10:15 p.m.
12 messages -- Newest posted Saturday, 10 March 2001, at 1:57 p.m.

two pack polyurethane varnish
pete croft -- Thursday, 8 March 2001, at 10:47 p.m.
2 messages -- Newest posted Saturday, 10 March 2001, at 5:55 p.m.

North Star 2nd Fill Coat *Pic*
Steve -- Friday, 9 March 2001, at 7:49 a.m.
7 messages -- Newest posted Friday, 9 March 2001, at 5:23 p.m.

Re: Footpeg mounts redux
Scott Fitzgerrell -- Friday, 9 March 2001, at 1:31 p.m.
1 message

Great Auk forms
Bret -- Friday, 9 March 2001, at 6:16 p.m.
1 message

Time flies when you are on the KBBS. OT
Grant Goltz -- Friday, 9 March 2001, at 7:22 p.m.
5 messages -- Newest posted Monday, 12 March 2001, at 5:00 p.m.

wherry query OT
Tom Kurth -- Saturday, 10 March 2001, at 7:57 a.m.
11 messages -- Newest posted Monday, 12 March 2001, at 10:50 p.m.

george cushing & fibra tape
brett (the hitman hart)onnink -- Saturday, 10 March 2001, at 9:48 a.m.
1 message

SF Bay area source for cedar
Scott Fitzgerrell -- Saturday, 10 March 2001, at 2:02 p.m.
6 messages -- Newest posted Thursday, 15 March 2001, at 6:20 p.m.

Bead and Cove bits
Dave -- Saturday, 10 March 2001, at 4:34 p.m.
11 messages -- Newest posted Monday, 12 March 2001, at 9:29 a.m.

Difficulties Using Quarter Sawn Strips
Ken -- Saturday, 10 March 2001, at 5:22 p.m.
7 messages -- Newest posted Sunday, 11 March 2001, at 5:49 a.m.

sierra club on bbs?
brett (the hitman hart)onnink -- Saturday, 10 March 2001, at 5:26 p.m.
19 messages -- Newest posted Thursday, 15 March 2001, at 1:02 a.m.

2 dimensional compound angles for floors of kayak
Violet Cloutier -- Saturday, 10 March 2001, at 6:11 p.m.
17 messages -- Newest posted Wednesday, 14 March 2001, at 1:37 a.m.

Re: followup
Spidey -- Sunday, 11 March 2001, at 2:16 a.m.
1 message

Kayak Yoke Drawing *Pic*
John Monfoe -- Sunday, 11 March 2001, at 3:44 a.m.
9 messages -- Newest posted Thursday, 15 March 2001, at 6:28 a.m.

Pygmy "Taiga" kit
John Stys -- Sunday, 11 March 2001, at 10:02 a.m.
3 messages -- Newest posted Monday, 12 March 2001, at 10:19 a.m.

Polyurethane Glues?
bob -- Sunday, 11 March 2001, at 10:53 a.m.
4 messages -- Newest posted Sunday, 11 March 2001, at 11:36 p.m.

Rudder pedals placement - newbie question
Ed -- Sunday, 11 March 2001, at 12:32 p.m.
5 messages -- Newest posted Monday, 12 March 2001, at 9:22 p.m.

best foot pegs for g17 ??? *Pic*
Ron -- Sunday, 11 March 2001, at 4:49 p.m.
9 messages -- Newest posted Wednesday, 14 March 2001, at 11:48 a.m.

Noah's Marine
Jim LaClair -- Sunday, 11 March 2001, at 8:26 p.m.
5 messages -- Newest posted Tuesday, 13 March 2001, at 11:04 a.m.

Re: Difficulties Using Quarter Sawn Strips
Ken -- Sunday, 11 March 2001, at 9:13 p.m.
4 messages -- Newest posted Monday, 12 March 2001, at 11:07 p.m.

Shaping internal stems
Pete Rudie -- Monday, 12 March 2001, at 1:09 a.m.
1 message

Car Clips for a gutterless rack connection. *Pic*
John Monfoe -- Monday, 12 March 2001, at 6:03 a.m.
11 messages -- Newest posted Wednesday, 14 March 2001, at 10:20 a.m.

Good idea George!
Jim McCool -- Monday, 12 March 2001, at 9:18 a.m.
1 message

Snow yaking *Pic*
Steve -- Monday, 12 March 2001, at 9:28 a.m.
16 messages -- Newest posted Tuesday, 13 March 2001, at 1:21 p.m.

Gaps
Dave Seales -- Monday, 12 March 2001, at 12:34 p.m.
12 messages -- Newest posted Tuesday, 13 March 2001, at 5:51 a.m.

Help for addiction requested
Roger Nuffer -- Monday, 12 March 2001, at 1:10 p.m.
9 messages -- Newest posted Tuesday, 13 March 2001, at 9:25 a.m.

Sanding
Mark Berger -- Monday, 12 March 2001, at 8:17 p.m.
2 messages -- Newest posted Monday, 12 March 2001, at 11:40 p.m.

Can Varnish be sprayed?
Brian Schroeder -- Tuesday, 13 March 2001, at 1:20 p.m.
7 messages -- Newest posted Friday, 16 March 2001, at 12:15 p.m.

sander justification
Matt Britschgi -- Tuesday, 13 March 2001, at 2:59 p.m.
16 messages -- Newest posted Thursday, 15 March 2001, at 3:13 a.m.

How Do I Get Smooth Fillets?
Paul Pinder -- Tuesday, 13 March 2001, at 4:17 p.m.
18 messages -- Newest posted Friday, 16 March 2001, at 1:06 p.m.

Re: Can Varnish be sprayed?
don -- Tuesday, 13 March 2001, at 7:03 p.m.
1 message

Varnish Questions
Don Campbell -- Tuesday, 13 March 2001, at 8:26 p.m.
2 messages -- Newest posted Tuesday, 13 March 2001, at 10:26 p.m.

Nitrile gloves
david -- Tuesday, 13 March 2001, at 8:43 p.m.
9 messages -- Newest posted Wednesday, 14 March 2001, at 11:35 a.m.

external strongback
sage -- Tuesday, 13 March 2001, at 10:42 p.m.
17 messages -- Newest posted Thursday, 15 March 2001, at 4:43 p.m.

Kayaking ergonomics
cameron butler -- Wednesday, 14 March 2001, at 3:30 a.m.
10 messages -- Newest posted Thursday, 15 March 2001, at 8:33 p.m.

staple-less.....
daren -- Wednesday, 14 March 2001, at 9:40 a.m.
13 messages -- Newest posted Sunday, 18 March 2001, at 12:45 a.m.

Cost of W.R. Cedar
Doug Kuik -- Wednesday, 14 March 2001, at 6:43 p.m.
13 messages -- Newest posted Friday, 16 March 2001, at 6:39 p.m.

Small boat Expo In Norwalk CT.
Eric Schade (shearwater boats) -- Wednesday, 14 March 2001, at 7:41 p.m.
6 messages -- Newest posted Thursday, 15 March 2001, at 8:09 p.m.

Form material: 3/4 MDF OK?
MikeWhy -- Wednesday, 14 March 2001, at 11:27 p.m.
4 messages -- Newest posted Thursday, 15 March 2001, at 11:22 a.m.

Inside hull: To glass or not to glass?
Steve Klarquist -- Thursday, 15 March 2001, at 11:45 a.m.
24 messages -- Newest posted Monday, 26 March 2001, at 3:17 p.m.

Re: Inside hull: To glass or not to glass?
Steve Klarquist -- Thursday, 15 March 2001, at 1:19 p.m.
2 messages -- Newest posted Thursday, 15 March 2001, at 11:04 p.m.

luan plywood for Mill Creek
Bill Boyle -- Thursday, 15 March 2001, at 1:36 p.m.
8 messages -- Newest posted Monday, 26 March 2001, at 2:56 p.m.

Non-stock designs
Porter -- Thursday, 15 March 2001, at 1:46 p.m.
5 messages -- Newest posted Friday, 16 March 2001, at 12:59 p.m.

Just one last Cedar Flute question...I promise
Mike Worthan -- Thursday, 15 March 2001, at 1:56 p.m.
5 messages -- Newest posted Friday, 16 March 2001, at 1:09 a.m.

Re: Food decorating bags
Ross Leidy -- Thursday, 15 March 2001, at 5:18 p.m.
2 messages -- Newest posted Thursday, 15 March 2001, at 6:01 p.m.

Re: unclear
Lee Gardner -- Thursday, 15 March 2001, at 6:53 p.m.
1 message

Increase Guillemot size
Joe Cunningham -- Thursday, 15 March 2001, at 6:55 p.m.
9 messages -- Newest posted Monday, 19 March 2001, at 10:57 a.m.

Using Air Dried Cedar
Ken -- Thursday, 15 March 2001, at 9:52 p.m.
9 messages -- Newest posted Friday, 30 March 2001, at 4:57 p.m.

bamboo laminate
brett (the hitman hart)onnink -- Thursday, 15 March 2001, at 10:47 p.m.
14 messages -- Newest posted Sunday, 18 March 2001, at 7:26 p.m.

Re: a small rant about the cost of lumber.
Paul Lund -- Friday, 16 March 2001, at 2:35 a.m.
3 messages -- Newest posted Monday, 19 March 2001, at 12:20 p.m.

Boat Building Inspector *Pic*
Steve -- Friday, 16 March 2001, at 8:10 a.m.
17 messages -- Newest posted Saturday, 17 March 2001, at 5:42 p.m.

Re: unclear
Lee Gardner -- Friday, 16 March 2001, at 1:19 p.m.
1 message

varnish ?
Lee Gardner -- Friday, 16 March 2001, at 1:26 p.m.
4 messages -- Newest posted Saturday, 24 March 2001, at 12:25 p.m.

Re: Food decorating bags *Pic*
Rehd -- Friday, 16 March 2001, at 7:57 p.m.
1 message

fiberglass lay up question
Richard Boyle -- Friday, 16 March 2001, at 11:42 p.m.
7 messages -- Newest posted Saturday, 17 March 2001, at 11:02 p.m.

First boat fairing questions
Blu TenBrink -- Saturday, 17 March 2001, at 1:07 a.m.
7 messages -- Newest posted Saturday, 17 March 2001, at 10:55 p.m.

A sneak peek *Pic*
Dale Frolander -- Saturday, 17 March 2001, at 2:46 a.m.
34 messages -- Newest posted Monday, 19 March 2001, at 2:34 p.m.

Re: unclear
bob -- Saturday, 17 March 2001, at 10:25 a.m.
1 message

o-ring hatch seal
Jim Martin -- Saturday, 17 March 2001, at 10:51 a.m.
6 messages -- Newest posted Wednesday, 21 March 2001, at 5:01 a.m.

Fibreglass Cloth
Greg Hughes -- Saturday, 17 March 2001, at 3:02 p.m.
2 messages -- Newest posted Saturday, 17 March 2001, at 3:21 p.m.

Re: fiberglass lay up question
Richard Boyle -- Saturday, 17 March 2001, at 9:04 p.m.
1 message

Re: Cool Tool
Spidey -- Sunday, 18 March 2001, at 12:35 a.m.
10 messages -- Newest posted Tuesday, 20 March 2001, at 3:58 p.m.

hatch cover retainers.
Jim Lindamood -- Sunday, 18 March 2001, at 8:22 a.m.
12 messages -- Newest posted Monday, 19 March 2001, at 4:01 p.m.

Help!!
Greg Hughes -- Sunday, 18 March 2001, at 11:35 a.m.
6 messages -- Newest posted Sunday, 18 March 2001, at 9:29 p.m.

Progress Photo - G17 *Pic*
Dwight -- Sunday, 18 March 2001, at 5:28 p.m.
6 messages -- Newest posted Monday, 19 March 2001, at 9:27 a.m.

Re: Cutting tools.
Spidey -- Sunday, 18 March 2001, at 7:33 p.m.
2 messages -- Newest posted Monday, 19 March 2001, at 1:17 p.m.

long boards and art work
brett (the hitman hart)onnink -- Sunday, 18 March 2001, at 10:45 p.m.
3 messages -- Newest posted Monday, 19 March 2001, at 12:32 p.m.

bearboat download
daren -- Monday, 19 March 2001, at 12:48 a.m.
9 messages -- Newest posted Tuesday, 20 March 2001, at 9:53 a.m.

prize?
Chris Casazza -- Monday, 19 March 2001, at 7:00 a.m.
2 messages -- Newest posted Monday, 19 March 2001, at 10:46 a.m.

WE LAUNCHED!!
David Hanson -- Monday, 19 March 2001, at 9:52 a.m.
14 messages -- Newest posted Tuesday, 20 March 2001, at 3:59 p.m.

Re: fiberglass lay up question
Richard Boyle -- Monday, 19 March 2001, at 9:57 a.m.
1 message

Cane seats
Jim -- Monday, 19 March 2001, at 10:02 a.m.
4 messages -- Newest posted Monday, 19 March 2001, at 6:59 p.m.

I need opinions.
John Monfoe -- Monday, 19 March 2001, at 10:35 a.m.
5 messages -- Newest posted Monday, 19 March 2001, at 2:23 p.m.

kayak outriggers
art castagno -- Monday, 19 March 2001, at 12:39 p.m.
2 messages -- Newest posted Monday, 19 March 2001, at 3:37 p.m.

kayak trim
Sharon -- Monday, 19 March 2001, at 1:39 p.m.
4 messages -- Newest posted Monday, 19 March 2001, at 10:42 p.m.

redwood darkening
peter czerpak -- Monday, 19 March 2001, at 3:29 p.m.
5 messages -- Newest posted Wednesday, 21 March 2001, at 10:37 a.m.

Sea trials for the hybrid "Sea Spirit" *Pic*
Dick Gamble -- Monday, 19 March 2001, at 3:41 p.m.
20 messages -- Newest posted Monday, 26 March 2001, at 4:51 a.m.

Re: I need opinions.
Ross Leidy -- Monday, 19 March 2001, at 4:35 p.m.
2 messages -- Newest posted Tuesday, 20 March 2001, at 5:19 a.m.

First time kayak builder
kayak Man -- Monday, 19 March 2001, at 4:44 p.m.
2 messages -- Newest posted Tuesday, 20 March 2001, at 3:33 a.m.

this message coresponds with the previous one
kayak Man -- Monday, 19 March 2001, at 4:51 p.m.
2 messages -- Newest posted Monday, 19 March 2001, at 8:22 p.m.

Re: In search of the brainless tool.
Chris Casazza -- Monday, 19 March 2001, at 5:16 p.m.
1 message

simple multiple-choice quiz
Dean Trexel -- Monday, 19 March 2001, at 5:41 p.m.
23 messages -- Newest posted Monday, 26 March 2001, at 12:58 a.m.

Considering a Skeg - Gotta Design?
Ken -- Monday, 19 March 2001, at 6:38 p.m.
4 messages -- Newest posted Thursday, 22 March 2001, at 1:36 a.m.

Saw Questions
john doerter -- Monday, 19 March 2001, at 8:30 p.m.
6 messages -- Newest posted Tuesday, 20 March 2001, at 7:04 p.m.

G17 Launched!! *Pic*
Todd Fry -- Monday, 19 March 2001, at 8:57 p.m.
8 messages -- Newest posted Tuesday, 20 March 2001, at 7:56 p.m.

Re: (in)competent
john doerter -- Monday, 19 March 2001, at 9:04 p.m.
1 message

Re: (in)competent
Bill Price -- Monday, 19 March 2001, at 9:14 p.m.
1 message

Re: (in)continent)
Rob Macks -- Monday, 19 March 2001, at 9:52 p.m.
3 messages -- Newest posted Tuesday, 20 March 2001, at 1:17 a.m.

Racks on Camper Shells
Tom -- Monday, 19 March 2001, at 10:28 p.m.
4 messages -- Newest posted Monday, 26 March 2001, at 12:45 a.m.

Re: reality, objective , bbqs
Lee Gardner -- Monday, 19 March 2001, at 10:55 p.m.
2 messages -- Newest posted Tuesday, 20 March 2001, at 1:25 a.m.

Competent Response Incompetent
Don Campbell -- Tuesday, 20 March 2001, at 1:15 a.m.
1 message

Does anybody know what happened to kayakfit.com?
Pete Rudie -- Tuesday, 20 March 2001, at 1:47 a.m.
3 messages -- Newest posted Tuesday, 20 March 2001, at 11:25 a.m.

Re: My recent spelling
Rehd -- Tuesday, 20 March 2001, at 1:59 a.m.
1 message

Applying Fill Coat *Pic*
Rehd -- Tuesday, 20 March 2001, at 3:25 a.m.
8 messages -- Newest posted Wednesday, 21 March 2001, at 2:12 a.m.

Re: (in)competent; now we're in for it
David Dick -- Tuesday, 20 March 2001, at 7:20 a.m.
1 message

who isn't incompetent?
Dean Trexel -- Tuesday, 20 March 2001, at 9:14 a.m.
4 messages -- Newest posted Wednesday, 21 March 2001, at 7:48 p.m.

you rotten scoundrel...!
risto -- Tuesday, 20 March 2001, at 11:55 a.m.
1 message

epoxy vapor
elliott -- Tuesday, 20 March 2001, at 12:13 p.m.
22 messages -- Newest posted Thursday, 22 March 2001, at 12:43 a.m.

epoxy addendum
elliott -- Tuesday, 20 March 2001, at 12:41 p.m.
13 messages -- Newest posted Wednesday, 21 March 2001, at 10:13 a.m.

Re: epoxy addendum
elliott -- Tuesday, 20 March 2001, at 12:56 p.m.
2 messages -- Newest posted Tuesday, 20 March 2001, at 11:49 p.m.

breathing rubber
Bill F. -- Tuesday, 20 March 2001, at 2:13 p.m.
1 message

Teak and epoxy compatible?
Jim P. -- Tuesday, 20 March 2001, at 3:26 p.m.
6 messages -- Newest posted Wednesday, 21 March 2001, at 2:04 p.m.

surf kayak
sage -- Tuesday, 20 March 2001, at 11:55 p.m.
5 messages -- Newest posted Friday, 23 March 2001, at 1:51 p.m.

Re: (in)competent
Pete Rudie -- Tuesday, 20 March 2001, at 11:59 p.m.
1 message

Better rethink your attitude *NM*
Spidey -- Wednesday, 21 March 2001, at 1:26 a.m.
1 message

Granny *Pic*
Nick W -- Wednesday, 21 March 2001, at 1:57 a.m.
8 messages -- Newest posted Friday, 23 March 2001, at 9:09 a.m.

Simple Steamer *Pic*
Dick Gamble -- Wednesday, 21 March 2001, at 6:38 a.m.
5 messages -- Newest posted Thursday, 22 March 2001, at 12:58 a.m.

Re: epoxy addendum
Jim Lindamood -- Wednesday, 21 March 2001, at 7:18 a.m.
1 message

Re: Georges response
elliott -- Wednesday, 21 March 2001, at 7:53 a.m.
2 messages -- Newest posted Thursday, 22 March 2001, at 12:29 a.m.

Description of proper cartridge
elliott -- Wednesday, 21 March 2001, at 8:09 a.m.
4 messages -- Newest posted Wednesday, 21 March 2001, at 11:19 a.m.

3M Cartridge Source
elliott -- Wednesday, 21 March 2001, at 11:37 a.m.
1 message

Re: Liar
Dave Grimmer -- Wednesday, 21 March 2001, at 1:36 p.m.
1 message

SCKB site
Kevin Martin -- Wednesday, 21 March 2001, at 3:02 p.m.
2 messages -- Newest posted Wednesday, 21 March 2001, at 6:59 p.m.

Re: Liar
Dave Grimmer -- Wednesday, 21 March 2001, at 4:05 p.m.
15 messages -- Newest posted Friday, 23 March 2001, at 4:18 p.m.

Re: Liar
Robert -- Wednesday, 21 March 2001, at 5:16 p.m.
1 message

Re: Liar
Tim Smith -- Wednesday, 21 March 2001, at 5:28 p.m.
1 message

Q.E.D. *NM*
Pete Rudie -- Wednesday, 21 March 2001, at 10:06 p.m.
2 messages -- Newest posted Thursday, 22 March 2001, at 12:18 a.m.

help,
bob -- Wednesday, 21 March 2001, at 10:12 p.m.
4 messages -- Newest posted Thursday, 22 March 2001, at 11:02 a.m.

Re: My NEW view of System 3 Epoxy
Matthew -- Wednesday, 21 March 2001, at 10:41 p.m.
1 message

Goin Fishin
Don Campbell -- Wednesday, 21 March 2001, at 11:22 p.m.
2 messages -- Newest posted Thursday, 22 March 2001, at 1:16 a.m.

carved a Greenland paddle... my review: spiffy!
daniel -- Thursday, 22 March 2001, at 2:06 a.m.
15 messages -- Newest posted Monday, 26 March 2001, at 2:14 p.m.

NICK, Help!!!!!!!!
Dale Frolander -- Thursday, 22 March 2001, at 2:33 a.m.
5 messages -- Newest posted Thursday, 22 March 2001, at 4:14 p.m.

My son's new Cormorant is launched *Pic*
Mark Woodhead -- Thursday, 22 March 2001, at 2:58 a.m.
4 messages -- Newest posted Thursday, 22 March 2001, at 8:41 p.m.

Re: Point well taken.
elliott -- Thursday, 22 March 2001, at 8:25 a.m.
1 message

Re: Point well taken2.
elliott -- Thursday, 22 March 2001, at 9:02 a.m.
2 messages -- Newest posted Thursday, 22 March 2001, at 9:55 a.m.

Add West System to that
Dean Trexel -- Thursday, 22 March 2001, at 9:06 a.m.
1 message

Re:MY new view of "time on hands..."
Lee Gardner -- Thursday, 22 March 2001, at 9:44 a.m.
3 messages -- Newest posted Thursday, 22 March 2001, at 2:02 p.m.

Re: My NEW view of System 3 Epoxy
Richard Boyle -- Thursday, 22 March 2001, at 10:15 a.m.
3 messages -- Newest posted Friday, 23 March 2001, at 12:33 a.m.

Re: My NEW view of System 3 Epoxy
Paul Johnson -- Thursday, 22 March 2001, at 11:44 a.m.
9 messages -- Newest posted Monday, 26 March 2001, at 9:53 a.m.

Making a Norsaq
Kent LeBoutillier -- Thursday, 22 March 2001, at 11:57 a.m.
10 messages -- Newest posted Friday, 23 March 2001, at 2:00 p.m.

Re: My NEW view ... allergic reaction?
Ed -- Thursday, 22 March 2001, at 1:50 p.m.
3 messages -- Newest posted Thursday, 22 March 2001, at 7:49 p.m.

Building a fishing boat - recommendations?
Brian Hanks -- Thursday, 22 March 2001, at 2:17 p.m.
26 messages -- Newest posted Monday, 26 March 2001, at 7:03 a.m.

Re: My point
Paul Johnson -- Thursday, 22 March 2001, at 3:30 p.m.
1 message

Re: Point well taken2.
Dean Trexel -- Thursday, 22 March 2001, at 4:46 p.m.
1 message

SF Bay area source for cedar
Scott Fitzgerrell -- Thursday, 22 March 2001, at 6:00 p.m.
2 messages -- Newest posted Thursday, 22 March 2001, at 11:46 p.m.

Varnishing problem
John Michne -- Thursday, 22 March 2001, at 7:04 p.m.
23 messages -- Newest posted Thursday, 29 March 2001, at 10:54 a.m.

Re: George
elliott -- Thursday, 22 March 2001, at 8:41 p.m.
9 messages -- Newest posted Friday, 23 March 2001, at 1:51 p.m.

Cutting Coves
Dave Seales -- Thursday, 22 March 2001, at 11:29 p.m.
7 messages -- Newest posted Friday, 23 March 2001, at 8:31 p.m.

Re: "correct the MSDS"
Pete Rudie -- Friday, 23 March 2001, at 12:03 p.m.
2 messages -- Newest posted Friday, 23 March 2001, at 3:07 p.m.

Canadian sources for oufitting?
Richard Boyle -- Friday, 23 March 2001, at 12:47 p.m.
3 messages -- Newest posted Friday, 23 March 2001, at 8:55 p.m.

Re: Cutting Coves
mike allen ---> -- Friday, 23 March 2001, at 3:22 p.m.
1 message

Re: "No commercial advertising"
Paul Johnson -- Friday, 23 March 2001, at 3:43 p.m.
1 message

Re: Sometimes...
Shawn Baker -- Friday, 23 March 2001, at 4:09 p.m.
1 message

Re: "No commercial advertising"
Paul Johnson -- Friday, 23 March 2001, at 4:19 p.m.
1 message

Re: Read very carefully ...
Paul Johnson -- Friday, 23 March 2001, at 4:24 p.m.
1 message

Re: Cutting Coves
mike allen ---> -- Friday, 23 March 2001, at 4:26 p.m.
1 message

just curious... OT
tony b -- Friday, 23 March 2001, at 5:06 p.m.
1 message

Re: "No commercial advertising"
Julie Kanarr -- Friday, 23 March 2001, at 5:23 p.m.
3 messages -- Newest posted Saturday, 24 March 2001, at 7:39 p.m.

Re: Georges response
elliott -- Friday, 23 March 2001, at 7:53 p.m.
1 message

Attn: Seat carvers..question
Mike -- Friday, 23 March 2001, at 9:29 p.m.
5 messages -- Newest posted Saturday, 24 March 2001, at 11:43 a.m.

Durability worries
Jim P. -- Friday, 23 March 2001, at 10:29 p.m.
16 messages -- Newest posted Tuesday, 27 March 2001, at 12:54 p.m.

glue starved strips
David -- Friday, 23 March 2001, at 11:03 p.m.
3 messages -- Newest posted Saturday, 24 March 2001, at 8:39 a.m.

$10 Gas Mask.
John Monfoe -- Saturday, 24 March 2001, at 7:14 a.m.
6 messages -- Newest posted Sunday, 25 March 2001, at 7:51 a.m.

Edge on foot peg base
Ed -- Saturday, 24 March 2001, at 11:48 a.m.
2 messages -- Newest posted Sunday, 25 March 2001, at 12:35 a.m.

Re: Durability worries
Rob Macks -- Saturday, 24 March 2001, at 1:19 p.m.
1 message

Re: Durability worries
Jim P. -- Saturday, 24 March 2001, at 2:36 p.m.
8 messages -- Newest posted Thursday, 29 March 2001, at 2:30 p.m.

Tiny Bubbles
Arthur -- Saturday, 24 March 2001, at 5:42 p.m.
5 messages -- Newest posted Monday, 26 March 2001, at 2:54 p.m.

Re: Durability worries
Jim P. -- Saturday, 24 March 2001, at 6:25 p.m.
1 message

aleut single paddle?
John Haynes -- Saturday, 24 March 2001, at 6:57 p.m.
3 messages -- Newest posted Sunday, 25 March 2001, at 9:21 a.m.

Re: Durability worries
Jim P. -- Saturday, 24 March 2001, at 8:35 p.m.
4 messages -- Newest posted Monday, 26 March 2001, at 10:05 a.m.

I never saw a reaction to cured epoxy.
John Monfoe -- Sunday, 25 March 2001, at 5:58 a.m.
1 message

Respirator questions.
Greg Hughes -- Sunday, 25 March 2001, at 6:51 a.m.
6 messages -- Newest posted Tuesday, 27 March 2001, at 9:30 p.m.

Says who?
Pete Rudie -- Sunday, 25 March 2001, at 10:27 a.m.
2 messages -- Newest posted Sunday, 25 March 2001, at 11:50 a.m.

Re: You can break anything
Grant Goltz -- Sunday, 25 March 2001, at 11:21 a.m.
1 message

Re: History
Sam Mcfadden -- Sunday, 25 March 2001, at 6:03 p.m.
1 message

Re: History
Jim -- Sunday, 25 March 2001, at 6:11 p.m.
1 message

weathercocking
Bruce -- Sunday, 25 March 2001, at 6:27 p.m.
25 messages -- Newest posted Wednesday, 28 March 2001, at 12:22 p.m.

Re: History
Jim -- Sunday, 25 March 2001, at 8:09 p.m.
1 message

shear strip on night heron
sage -- Sunday, 25 March 2001, at 8:14 p.m.
5 messages -- Newest posted Monday, 26 March 2001, at 9:38 a.m.

duck-roll-bob-and-weave
Sam Mcfadden -- Sunday, 25 March 2001, at 8:54 p.m.
1 message

Or the wrong conclusion
Pete Rudie -- Monday, 26 March 2001, at 2:09 a.m.
1 message

Proper Seat Arrangement... ? *Pic*
Rehd -- Monday, 26 March 2001, at 3:20 a.m.
10 messages -- Newest posted Wednesday, 28 March 2001, at 12:14 p.m.

West System Hardeners
Dave Seales -- Monday, 26 March 2001, at 6:49 a.m.
7 messages -- Newest posted Tuesday, 27 March 2001, at 1:36 a.m.

Flush Hatches
Matthew -- Monday, 26 March 2001, at 8:34 a.m.
3 messages -- Newest posted Tuesday, 27 March 2001, at 1:10 a.m.

Fairing
Elliott -- Monday, 26 March 2001, at 8:53 a.m.
2 messages -- Newest posted Monday, 26 March 2001, at 9:26 a.m.

Progress *Pic*
Elliott -- Monday, 26 March 2001, at 9:17 a.m.
7 messages -- Newest posted Tuesday, 27 March 2001, at 7:33 a.m.

Re: another point
Nick Schade - Guillemot Kayaks -- Monday, 26 March 2001, at 10:16 a.m.
1 message

Varnishing over epoxy
Stan Snapp -- Monday, 26 March 2001, at 11:52 a.m.
15 messages -- Newest posted Wednesday, 28 March 2001, at 4:16 p.m.

and the beat goes on... *NM*
Sam McFadden -- Monday, 26 March 2001, at 2:34 p.m.
2 messages -- Newest posted Monday, 26 March 2001, at 7:50 p.m.

4 oz S-glass weave
peter -- Monday, 26 March 2001, at 4:12 p.m.
5 messages -- Newest posted Wednesday, 28 March 2001, at 6:33 p.m.

Re: History
Nick Schade - Guillemot Kayaks -- Monday, 26 March 2001, at 4:22 p.m.
5 messages -- Newest posted Friday, 30 March 2001, at 5:14 p.m.

PLEASE HELP by looking @ a kayak trailer i designd
Benita Kingsbury -- Monday, 26 March 2001, at 5:12 p.m.
1 message

6 oz fiberglass tape
Steve -- Monday, 26 March 2001, at 7:31 p.m.
4 messages -- Newest posted Tuesday, 27 March 2001, at 12:03 a.m.

Re: I smell a coward
Bruce H. -- Monday, 26 March 2001, at 7:40 p.m.
3 messages -- Newest posted Thursday, 29 March 2001, at 3:39 p.m.

Re: (In)competence.
Bruce -- Monday, 26 March 2001, at 10:14 p.m.
3 messages -- Newest posted Thursday, 29 March 2001, at 6:31 p.m.

Broken Paddle - Repair Advice??
Mike -- Tuesday, 27 March 2001, at 12:19 a.m.
19 messages -- Newest posted Monday, 16 July 2001, at 4:07 p.m.

Temporary Cockpit fill-in for fiberglassing ?
John Monfoe -- Tuesday, 27 March 2001, at 5:43 a.m.
3 messages -- Newest posted Wednesday, 28 March 2001, at 5:18 a.m.

Re: Less Tolerant
Nick Schade - Guillemot Kayaks -- Tuesday, 27 March 2001, at 9:57 a.m.
2 messages -- Newest posted Thursday, 29 March 2001, at 4:17 p.m.

Whoops! End pour disaster! Help! *Pic*
Pete Roszyk -- Tuesday, 27 March 2001, at 12:44 p.m.
32 messages -- Newest posted Friday, 30 March 2001, at 1:43 p.m.

Re: George, thanks for showing us your true colors
Bruce -- Tuesday, 27 March 2001, at 1:56 p.m.
10 messages -- Newest posted Friday, 30 March 2001, at 5:47 p.m.

2 Part Poly Clear Coat Finish Advice
Dan Ernst -- Tuesday, 27 March 2001, at 2:09 p.m.
3 messages -- Newest posted Tuesday, 27 March 2001, at 4:48 p.m.

Lawyers BBS
David Hanson -- Tuesday, 27 March 2001, at 3:15 p.m.
1 message

Painting
Shane -- Tuesday, 27 March 2001, at 4:00 p.m.
2 messages -- Newest posted Tuesday, 27 March 2001, at 4:47 p.m.

Re: The entire quote can be found at ...
garland reese -- Tuesday, 27 March 2001, at 4:04 p.m.
1 message

Gentlemen Please
Roy Morford -- Tuesday, 27 March 2001, at 4:07 p.m.
54 messages -- Newest posted Wednesday, 4 April 2001, at 1:34 p.m.

Truth is an absolute defense, so
Pete Rudie -- Tuesday, 27 March 2001, at 4:41 p.m.
4 messages -- Newest posted Tuesday, 27 March 2001, at 11:19 p.m.

Re: libel ?
addison -- Tuesday, 27 March 2001, at 5:31 p.m.
1 message

Re: guidelines
Jon -- Tuesday, 27 March 2001, at 7:58 p.m.
2 messages -- Newest posted Tuesday, 27 March 2001, at 8:59 p.m.

Re: The entire quote can be found at ...
garland reese -- Tuesday, 27 March 2001, at 9:50 p.m.
1 message

Re: guidelines
Dale Frolander -- Tuesday, 27 March 2001, at 9:51 p.m.
1 message

oops!
sage -- Tuesday, 27 March 2001, at 10:28 p.m.
3 messages -- Newest posted Tuesday, 27 March 2001, at 11:47 p.m.

How can I say this gently?
Lance -- Wednesday, 28 March 2001, at 8:01 a.m.
1 message

Re: Worthless free legal advice
Geo. Cushing -- Wednesday, 28 March 2001, at 12:07 p.m.
1 message

Speaking of broken paddles...
Brian Nystrom -- Wednesday, 28 March 2001, at 12:28 p.m.
3 messages -- Newest posted Thursday, 29 March 2001, at 11:56 a.m.

Chesapeake 17 vs. 17LT
Adam Darack -- Wednesday, 28 March 2001, at 1:59 p.m.
14 messages -- Newest posted Friday, 30 March 2001, at 7:42 p.m.

Lively Crowd *Pic*
Chip Sandresky -- Wednesday, 28 March 2001, at 5:35 p.m.
5 messages -- Newest posted Wednesday, 28 March 2001, at 7:58 p.m.

Early stages of Osprey Triple *Pic*
Ross Sieber -- Wednesday, 28 March 2001, at 6:07 p.m.
12 messages -- Newest posted Thursday, 29 March 2001, at 2:59 p.m.

It's a Hull *Pic*
Elliott -- Wednesday, 28 March 2001, at 8:37 p.m.
14 messages -- Newest posted Saturday, 31 March 2001, at 10:02 a.m.

Broken Paddle update
Mike -- Wednesday, 28 March 2001, at 10:14 p.m.
3 messages -- Newest posted Thursday, 29 March 2001, at 11:29 p.m.

Guillemot progress *Pic*
Richard Boyle -- Wednesday, 28 March 2001, at 11:41 p.m.
12 messages -- Newest posted Friday, 30 March 2001, at 8:23 a.m.

Deck and Hull joining problem
Stan Snapp -- Thursday, 29 March 2001, at 1:37 a.m.
11 messages -- Newest posted Friday, 30 March 2001, at 8:17 a.m.

Big Feet
Jim -- Thursday, 29 March 2001, at 11:47 a.m.
4 messages -- Newest posted Thursday, 29 March 2001, at 7:24 p.m.

Steam bending
Kent LeBoutillier -- Thursday, 29 March 2001, at 12:03 p.m.
17 messages -- Newest posted Wednesday, 4 April 2001, at 5:27 a.m.

Lofting Guillemot
Louis Berk -- Thursday, 29 March 2001, at 1:51 p.m.
4 messages -- Newest posted Thursday, 29 March 2001, at 6:11 p.m.

Strip width
Scott E. Davis -- Thursday, 29 March 2001, at 1:54 p.m.
5 messages -- Newest posted Friday, 30 March 2001, at 1:37 p.m.

sof walrus
brett (the hitman hart)onnink -- Thursday, 29 March 2001, at 3:33 p.m.
16 messages -- Newest posted Monday, 2 April 2001, at 1:39 a.m.

Dyes/Stains/colorations
Seth Winner -- Thursday, 29 March 2001, at 10:36 p.m.
6 messages -- Newest posted Friday, 30 March 2001, at 7:08 p.m.

Strapping Tape Problem
Al Gunther -- Friday, 30 March 2001, at 12:51 a.m.
6 messages -- Newest posted Friday, 30 March 2001, at 7:03 p.m.

When to cut hatches?
Jon Murray -- Friday, 30 March 2001, at 1:19 a.m.
1 message

Return of the Return *Pic*
Bill Price -- Friday, 30 March 2001, at 2:26 a.m.
15 messages -- Newest posted Saturday, 31 March 2001, at 1:21 p.m.

ply thickness - glass weight tradeoff
Chris Luneski -- Friday, 30 March 2001, at 2:28 a.m.
6 messages -- Newest posted Sunday, 8 April 2001, at 2:05 a.m.

rowing outriggers
Chris Luneski -- Friday, 30 March 2001, at 2:44 a.m.
6 messages -- Newest posted Sunday, 8 April 2001, at 2:31 a.m.

When is the Cayake done ???
Arthur -- Friday, 30 March 2001, at 4:06 a.m.
3 messages -- Newest posted Monday, 2 April 2001, at 1:18 a.m.

ROS Sanding?
John Monfoe -- Friday, 30 March 2001, at 5:42 a.m.
14 messages -- Newest posted Sunday, 1 April 2001, at 6:53 a.m.

Outdoor sanding. *Pic*
John Monfoe -- Friday, 30 March 2001, at 9:08 a.m.
11 messages -- Newest posted Sunday, 1 April 2001, at 10:45 a.m.

Super Paint...
Pete Palagonia -- Friday, 30 March 2001, at 10:15 a.m.
1 message

You still here? *NM*
Charley Dean -- Friday, 30 March 2001, at 10:32 a.m.
1 message

New favorite
Elliott -- Friday, 30 March 2001, at 12:17 p.m.
13 messages -- Newest posted Monday, 2 April 2001, at 1:17 p.m.

Kayak Builders of Southern California
Dave Grimmer -- Friday, 30 March 2001, at 12:43 p.m.
13 messages -- Newest posted Thursday, 5 April 2001, at 10:45 a.m.

UV 303
Tom -- Friday, 30 March 2001, at 1:46 p.m.
9 messages -- Newest posted Monday, 2 April 2001, at 4:12 p.m.

Frostline kits
Keith -- Friday, 30 March 2001, at 3:14 p.m.
8 messages -- Newest posted Sunday, 1 April 2001, at 6:24 p.m.

2nd time out
David Hanson -- Friday, 30 March 2001, at 8:17 p.m.
1 message

Kid-sized kayaks?
David McCone -- Friday, 30 March 2001, at 11:59 p.m.
19 messages -- Newest posted Wednesday, 4 April 2001, at 12:13 p.m.

Rudder Cable clamp *Pic*
Dale Frolander -- Saturday, 31 March 2001, at 5:50 a.m.
10 messages -- Newest posted Monday, 2 April 2001, at 5:16 p.m.

Roll Around Yakstack *Pic*
Dick Gamble -- Saturday, 31 March 2001, at 4:19 p.m.
3 messages -- Newest posted Sunday, 1 April 2001, at 11:02 a.m.

wood discoloration
Jenny -- Saturday, 31 March 2001, at 4:27 p.m.
3 messages -- Newest posted Sunday, 1 April 2001, at 11:22 a.m.

marine varnish ?
Larry Storer -- Saturday, 31 March 2001, at 7:18 p.m.
2 messages -- Newest posted Sunday, 1 April 2001, at 2:02 p.m.

Gap size to strip @Deck shear from hull
Arthur -- Saturday, 31 March 2001, at 8:03 p.m.
3 messages -- Newest posted Monday, 2 April 2001, at 1:15 a.m.

just a few little problems
sage -- Saturday, 31 March 2001, at 10:12 p.m.
4 messages -- Newest posted Sunday, 1 April 2001, at 10:24 p.m.

moisture for wetting out
David -- Sunday, 1 April 2001, at 3:15 a.m.
6 messages -- Newest posted Sunday, 1 April 2001, at 3:05 p.m.

Sailing Canoe...... ??? *Pic*
Rehd -- Sunday, 1 April 2001, at 4:40 a.m.
8 messages -- Newest posted Wednesday, 4 April 2001, at 5:13 p.m.

Electric pump answers
Dale Frolander -- Sunday, 1 April 2001, at 5:24 a.m.
3 messages -- Newest posted Sunday, 1 April 2001, at 10:21 p.m.

Don't answer the phone!!!!!
Roy Morford -- Sunday, 1 April 2001, at 1:14 p.m.
24 messages -- Newest posted Friday, 6 April 2001, at 10:10 a.m.

Hunter kayak trailer
Gini L. -- Sunday, 1 April 2001, at 2:55 p.m.
2 messages -- Newest posted Tuesday, 10 April 2001, at 9:29 p.m.

Need a soft backing pad
Elliott -- Sunday, 1 April 2001, at 5:05 p.m.
4 messages -- Newest posted Monday, 2 April 2001, at 9:25 a.m.

paint for a foldable skin ?
Erez -- Sunday, 1 April 2001, at 7:52 p.m.
6 messages -- Newest posted Tuesday, 3 April 2001, at 12:56 a.m.

stain before glassing - stoddards solvent?
Bruce -- Sunday, 1 April 2001, at 9:58 p.m.
5 messages -- Newest posted Monday, 2 April 2001, at 10:07 a.m.

Black spots on wood (rot???)
David Walker -- Sunday, 1 April 2001, at 11:51 p.m.
5 messages -- Newest posted Wednesday, 4 April 2001, at 5:00 p.m.

New Kayak Building Book Just Released *Pic*
Mike Hanks -- Monday, 2 April 2001, at 12:03 a.m.
8 messages -- Newest posted Thursday, 5 April 2001, at 4:20 p.m.

2-part urethane
Mike Hilt -- Monday, 2 April 2001, at 12:50 a.m.
1 message

Trueing One Edge Of Lonk Planks
Ken -- Monday, 2 April 2001, at 1:56 a.m.
20 messages -- Newest posted Friday, 6 April 2001, at 2:03 p.m.

Deck Plates.
John Monfoe -- Monday, 2 April 2001, at 6:19 a.m.
6 messages -- Newest posted Wednesday, 4 April 2001, at 6:08 a.m.

North Star Deck *Pic*
Steve -- Monday, 2 April 2001, at 9:06 a.m.
17 messages -- Newest posted Thursday, 5 April 2001, at 10:56 a.m.

Supports *Pic*
Elliott -- Monday, 2 April 2001, at 9:16 a.m.
1 message

Cutting strips, setting up table saw
Andy Hastings -- Monday, 2 April 2001, at 9:40 a.m.
15 messages -- Newest posted Wednesday, 4 April 2001, at 9:16 p.m.

More Data *Pic*
Nick Schade - Guillemot Kayaks -- Monday, 2 April 2001, at 9:49 a.m.
2 messages -- Newest posted Monday, 2 April 2001, at 11:06 a.m.

Anyone use non-sanding varnish?
Jack -- Monday, 2 April 2001, at 10:38 a.m.
6 messages -- Newest posted Wednesday, 4 April 2001, at 3:56 p.m.

R2K1: Make your reservations today
Don Beale -- Monday, 2 April 2001, at 11:37 a.m.
21 messages -- Newest posted Monday, 9 April 2001, at 10:15 a.m.

3m, masking tape/drop cloth combo
Lee Gardner -- Monday, 2 April 2001, at 2:45 p.m.
4 messages -- Newest posted Monday, 2 April 2001, at 8:24 p.m.

NWOC sale and Robert Morris SOF book
Ben Staley -- Monday, 2 April 2001, at 3:17 p.m.
4 messages -- Newest posted Wednesday, 4 April 2001, at 10:25 a.m.

Tamarack for Coaming?
Greg Hughes -- Monday, 2 April 2001, at 9:39 p.m.
9 messages -- Newest posted Wednesday, 4 April 2001, at 1:31 p.m.

scratches, refinish, varnish
Randy Knauff -- Monday, 2 April 2001, at 10:32 p.m.
16 messages -- Newest posted Wednesday, 4 April 2001, at 1:21 p.m.

Paddle strength?
risto -- Tuesday, 3 April 2001, at 10:02 a.m.
24 messages -- Newest posted Friday, 6 April 2001, at 11:51 a.m.

Layout lines on dark cedar?
Brian Nystrom -- Tuesday, 3 April 2001, at 11:56 a.m.
8 messages -- Newest posted Wednesday, 4 April 2001, at 4:12 a.m.

Anyone Charles Walbridge's Boatbuilder's Manual
David Horner -- Tuesday, 3 April 2001, at 5:04 p.m.
10 messages -- Newest posted Wednesday, 4 April 2001, at 1:49 p.m.

G17 Deck Pattern *Pic*
Todd Fry -- Tuesday, 3 April 2001, at 6:35 p.m.
9 messages -- Newest posted Wednesday, 4 April 2001, at 11:49 a.m.

FG repair
Dennis Andrew -- Tuesday, 3 April 2001, at 10:09 p.m.
5 messages -- Newest posted Wednesday, 4 April 2001, at 10:18 p.m.

power feed
Russell Brown -- Tuesday, 3 April 2001, at 11:44 p.m.
20 messages -- Newest posted Thursday, 5 April 2001, at 9:26 a.m.

Old Shoes....Indeed ( Push-Stick ) *Pic*
Rehd -- Wednesday, 4 April 2001, at 1:21 a.m.
7 messages -- Newest posted Wednesday, 4 April 2001, at 9:19 p.m.

Surf designs
Paul Comerford -- Wednesday, 4 April 2001, at 3:30 a.m.
3 messages -- Newest posted Wednesday, 4 April 2001, at 10:52 a.m.

Ready for fiberglass
Dave Seales -- Wednesday, 4 April 2001, at 7:03 a.m.
6 messages -- Newest posted Wednesday, 4 April 2001, at 5:10 p.m.

Deck cracks.
John Monfoe -- Wednesday, 4 April 2001, at 5:19 p.m.
6 messages -- Newest posted Friday, 6 April 2001, at 7:19 a.m.

Win Some, Lose Some (ROS Sander & Vac)
Dwight -- Wednesday, 4 April 2001, at 9:26 p.m.
6 messages -- Newest posted Friday, 6 April 2001, at 12:33 a.m.

Nicks book
Tom-Atlanta -- Wednesday, 4 April 2001, at 11:10 p.m.
9 messages -- Newest posted Monday, 9 April 2001, at 1:41 p.m.

Speaking of varnish, and tiny bubbles...
Don Beale -- Thursday, 5 April 2001, at 1:42 a.m.
10 messages -- Newest posted Friday, 6 April 2001, at 5:54 p.m.

BBS Digest out of order
Nick Schade - Guillemot Kayaks -- Thursday, 5 April 2001, at 9:01 a.m.
5 messages -- Newest posted Tuesday, 10 April 2001, at 12:37 a.m.

shoulder injury:(
brett (the hitman hart)onnink -- Thursday, 5 April 2001, at 9:44 a.m.
19 messages -- Newest posted Monday, 9 April 2001, at 2:44 a.m.

Recontouring a deck
david -- Thursday, 5 April 2001, at 11:59 a.m.
2 messages -- Newest posted Thursday, 5 April 2001, at 5:39 p.m.

Finally finished stripping *Pic*
Andreas Albat -- Thursday, 5 April 2001, at 12:58 p.m.
22 messages -- Newest posted Friday, 6 April 2001, at 11:27 a.m.

SOCAL Boatbuilders Day (EVENT)
Scott Dollmeyer -- Thursday, 5 April 2001, at 2:10 p.m.
1 message

Paddle Making Book
Alan Resinger -- Thursday, 5 April 2001, at 6:27 p.m.
1 message

how many strips per hour?
sage -- Thursday, 5 April 2001, at 9:38 p.m.
13 messages -- Newest posted Sunday, 8 April 2001, at 3:01 a.m.

Stapleless in Seattle... hull stripping underway *Pic*
Ron Hagedorn -- Friday, 6 April 2001, at 12:30 a.m.
23 messages -- Newest posted Monday, 9 April 2001, at 5:15 p.m.

Thank you Nick for being a class act
Roger Nuffer -- Friday, 6 April 2001, at 1:46 a.m.
11 messages -- Newest posted Monday, 9 April 2001, at 10:30 a.m.

homemade sanding block
Bob -- Friday, 6 April 2001, at 6:16 a.m.
2 messages -- Newest posted Friday, 6 April 2001, at 10:05 a.m.

To First Time Builders!
James Neely -- Friday, 6 April 2001, at 9:41 a.m.
9 messages -- Newest posted Monday, 9 April 2001, at 11:47 a.m.

ADMIN! Thread Deleted
Nick Schade - Board Administrator -- Friday, 6 April 2001, at 9:43 a.m.
1 message

Trimming the Deck cloth
Andreas Albat -- Friday, 6 April 2001, at 11:44 a.m.
4 messages -- Newest posted Saturday, 7 April 2001, at 6:06 a.m.

foam?
John Rush -- Friday, 6 April 2001, at 1:06 p.m.
7 messages -- Newest posted Friday, 6 April 2001, at 9:35 p.m.

Rotozip for hatch cut outs?
Steve -- Friday, 6 April 2001, at 1:31 p.m.
13 messages -- Newest posted Sunday, 8 April 2001, at 3:24 p.m.

R2K1 Camping
Shawn Baker -- Friday, 6 April 2001, at 2:09 p.m.
18 messages -- Newest posted Monday, 9 April 2001, at 9:25 a.m.

Robert Morris Book at Amazon.com
Chris Casazza -- Friday, 6 April 2001, at 2:34 p.m.
2 messages -- Newest posted Friday, 6 April 2001, at 3:15 p.m.

Anyone bringing an Outer Island to R2K1
Shawn Baker -- Friday, 6 April 2001, at 3:58 p.m.
12 messages -- Newest posted Monday, 9 April 2001, at 12:02 p.m.

Cedar or cedar strip suppliers in/near NE Florida
Bill -- Friday, 6 April 2001, at 5:23 p.m.
1 message

Road Trip?
Roger Nuffer -- Saturday, 7 April 2001, at 12:27 a.m.
2 messages -- Newest posted Saturday, 7 April 2001, at 10:12 a.m.

Pencil marks *Pic*
Dale Frolander -- Saturday, 7 April 2001, at 3:37 a.m.
1 message

How soon for second fill coat?
Steve -- Saturday, 7 April 2001, at 10:17 a.m.
4 messages -- Newest posted Monday, 9 April 2001, at 3:20 p.m.

April Fool's *Pic*
Neil Nicol -- Saturday, 7 April 2001, at 11:00 a.m.
5 messages -- Newest posted Sunday, 8 April 2001, at 5:01 a.m.

Chesapeake LT 17 Kit For Sale
Douglas Engel -- Saturday, 7 April 2001, at 1:29 p.m.
1 message

whitewater design
Roger Conrad -- Saturday, 7 April 2001, at 4:12 p.m.
1 message

Pygmy Coho $2400 *Pic*
John Paul Burke -- Saturday, 7 April 2001, at 6:30 p.m.
2 messages -- Newest posted Saturday, 7 April 2001, at 11:32 p.m.

Score!
Don Beale -- Saturday, 7 April 2001, at 10:03 p.m.
8 messages -- Newest posted Monday, 9 April 2001, at 12:02 a.m.

Old Shoes - Push Stick-Thanks
Dave -- Saturday, 7 April 2001, at 10:25 p.m.
1 message

Photo-Point Gone Commercial
Rehd -- Sunday, 8 April 2001, at 1:36 a.m.
20 messages -- Newest posted Tuesday, 10 April 2001, at 5:56 p.m.

min. equipment to steam?
sage -- Sunday, 8 April 2001, at 3:07 a.m.
14 messages -- Newest posted Tuesday, 10 April 2001, at 12:43 p.m.

First time kayak fiberglasser.
John Monfoe -- Sunday, 8 April 2001, at 6:16 a.m.
5 messages -- Newest posted Monday, 9 April 2001, at 2:07 p.m.

greenland paddle warpage
brett (the hitman hart)onnink -- Sunday, 8 April 2001, at 6:52 p.m.
18 messages -- Newest posted Friday, 13 April 2001, at 3:21 p.m.

Is this a bad idea?
sage -- Sunday, 8 April 2001, at 10:04 p.m.
4 messages -- Newest posted Tuesday, 10 April 2001, at 10:24 p.m.

R2K1 - Share a site?
david -- Monday, 9 April 2001, at 11:33 a.m.
22 messages -- Newest posted Monday, 16 April 2001, at 5:35 p.m.

variable-speed switch?
Dean Trexel -- Monday, 9 April 2001, at 7:25 p.m.
6 messages -- Newest posted Wednesday, 11 April 2001, at 12:28 a.m.

Bubbles under glass
Dale Jeffers -- Monday, 9 April 2001, at 8:04 p.m.
11 messages -- Newest posted Wednesday, 11 April 2001, at 8:29 a.m.

Running Deck Strips Through the Cockpit
Arthur -- Tuesday, 10 April 2001, at 3:41 a.m.
15 messages -- Newest posted Wednesday, 18 April 2001, at 11:50 a.m.

3/8 radius router bits
Pete -- Tuesday, 10 April 2001, at 4:35 a.m.
21 messages -- Newest posted Tuesday, 17 April 2001, at 3:13 p.m.

Closed Cell Foam
John Monfoe -- Tuesday, 10 April 2001, at 6:14 a.m.
8 messages -- Newest posted Wednesday, 11 April 2001, at 7:47 a.m.

Seal coat blemish
Dave Seales -- Tuesday, 10 April 2001, at 7:04 a.m.
10 messages -- Newest posted Wednesday, 11 April 2001, at 8:52 a.m.

Newbie!
C. Stuart -- Tuesday, 10 April 2001, at 9:40 a.m.
11 messages -- Newest posted Friday, 13 April 2001, at 2:25 p.m.

Thickness planer
Pete Rudie -- Tuesday, 10 April 2001, at 12:26 p.m.
3 messages -- Newest posted Wednesday, 11 April 2001, at 1:40 p.m.

Band Saw blades?
Brian Nystrom -- Tuesday, 10 April 2001, at 1:00 p.m.
10 messages -- Newest posted Wednesday, 11 April 2001, at 1:54 p.m.

In the dark
Jim -- Tuesday, 10 April 2001, at 2:53 p.m.
6 messages -- Newest posted Tuesday, 10 April 2001, at 4:34 p.m.

chemical/mechanical bonding
Dave Seales -- Tuesday, 10 April 2001, at 3:28 p.m.
2 messages -- Newest posted Tuesday, 10 April 2001, at 9:05 p.m.

Large stitch holes
John Paul Burke -- Tuesday, 10 April 2001, at 9:55 p.m.
4 messages -- Newest posted Thursday, 12 April 2001, at 5:09 p.m.

HPLV gun and varnish
Bruce Heys -- Wednesday, 11 April 2001, at 12:19 a.m.
6 messages -- Newest posted Wednesday, 11 April 2001, at 3:32 p.m.

Feature Strip Blues *Pic*
Chip Sandresky -- Wednesday, 11 April 2001, at 3:24 a.m.
12 messages -- Newest posted Tuesday, 17 April 2001, at 6:38 a.m.

Coaming Suggestion for S&G Builders
Byron -- Wednesday, 11 April 2001, at 11:27 a.m.
5 messages -- Newest posted Friday, 13 April 2001, at 4:44 a.m.

Epoxy Resin
Chris Casazza -- Wednesday, 11 April 2001, at 1:09 p.m.
3 messages -- Newest posted Wednesday, 11 April 2001, at 6:12 p.m.

Galvanic action
Ross Leidy -- Wednesday, 11 April 2001, at 2:37 p.m.
6 messages -- Newest posted Thursday, 12 April 2001, at 12:02 p.m.

Wood Flour Amount added to Epoxy for Glue
Arthur -- Wednesday, 11 April 2001, at 4:08 p.m.
6 messages -- Newest posted Thursday, 12 April 2001, at 1:28 p.m.

coaming laminated rings
Tom -- Wednesday, 11 April 2001, at 4:16 p.m.
7 messages -- Newest posted Thursday, 12 April 2001, at 11:44 a.m.

Fiberglassed Deck *Pic*
John Monfoe -- Wednesday, 11 April 2001, at 6:04 p.m.
11 messages -- Newest posted Sunday, 15 April 2001, at 4:22 a.m.

Sorry for BBS problems last night
Nick Schade - Guillemot Kayaks -- Thursday, 12 April 2001, at 9:18 a.m.
6 messages -- Newest posted Friday, 13 April 2001, at 5:42 a.m.

Deck Finish dilemma
Steve -- Thursday, 12 April 2001, at 10:47 a.m.
4 messages -- Newest posted Thursday, 12 April 2001, at 5:24 p.m.

Progress *Pic*
Elliott -- Thursday, 12 April 2001, at 11:49 a.m.
8 messages -- Newest posted Friday, 13 April 2001, at 9:36 p.m.

Sheer strip trouble on Great Auk
Ronnie -- Thursday, 12 April 2001, at 1:20 p.m.
5 messages -- Newest posted Friday, 13 April 2001, at 5:15 a.m.

Ultralight Sea Kayak Idea
David Blodgett -- Thursday, 12 April 2001, at 5:15 p.m.
16 messages -- Newest posted Wednesday, 18 April 2001, at 7:44 p.m.

First Bender
Chris Luneski -- Thursday, 12 April 2001, at 8:39 p.m.
7 messages -- Newest posted Saturday, 14 April 2001, at 1:34 a.m.

Drawing your attention to the Trip Board
Roger Nuffer -- Friday, 13 April 2001, at 12:52 a.m.
1 message

Fiberglassing Ash Protective Strip? *Pic*
John Monfoe -- Friday, 13 April 2001, at 7:19 a.m.
13 messages -- Newest posted Wednesday, 18 April 2001, at 11:02 p.m.

foam seat cover
daren neufeld -- Friday, 13 April 2001, at 2:36 p.m.
14 messages -- Newest posted Sunday, 15 April 2001, at 10:23 p.m.

Project X
Tom-Atlanta -- Friday, 13 April 2001, at 3:16 p.m.
2 messages -- Newest posted Friday, 13 April 2001, at 4:39 p.m.

Another lofting question
Tom-Atlanta -- Friday, 13 April 2001, at 11:45 p.m.
4 messages -- Newest posted Saturday, 14 April 2001, at 9:43 a.m.

Walrus thoughts
Don Beale -- Saturday, 14 April 2001, at 1:43 a.m.
8 messages -- Newest posted Monday, 16 April 2001, at 2:09 p.m.

Sheer Clamp on Great Auk
Greg Hughes -- Saturday, 14 April 2001, at 10:29 a.m.
7 messages -- Newest posted Monday, 16 April 2001, at 9:31 a.m.

Blue Bungie
Dave Lindoo -- Saturday, 14 April 2001, at 2:15 p.m.
7 messages -- Newest posted Monday, 16 April 2001, at 9:47 p.m.

alternative ribs on a airolite
David Blodgett -- Saturday, 14 April 2001, at 10:19 p.m.
1 message

deck shear strip
sage -- Saturday, 14 April 2001, at 10:32 p.m.
3 messages -- Newest posted Sunday, 15 April 2001, at 9:19 a.m.

PKPADDLES.COM IS OFFERING COMPLETED PYGMY KAYAKS!
Eric Blendheim -- Sunday, 15 April 2001, at 2:44 a.m.
4 messages -- Newest posted Sunday, 15 April 2001, at 11:17 a.m.

foot braces
David -- Sunday, 15 April 2001, at 11:23 a.m.
9 messages -- Newest posted Monday, 16 April 2001, at 6:26 p.m.

Need Source for Neoprene
Roger Nuffer -- Sunday, 15 April 2001, at 11:39 a.m.
7 messages -- Newest posted Wednesday, 18 April 2001, at 1:08 a.m.

Bungie Knots
Nick W -- Sunday, 15 April 2001, at 2:20 p.m.
28 messages -- Newest posted Tuesday, 17 April 2001, at 11:24 a.m.

Southern Tier Lauan Supplier
Geo. Cushing -- Sunday, 15 April 2001, at 5:47 p.m.
5 messages -- Newest posted Monday, 16 April 2001, at 2:20 p.m.

Glue Doorskin before or after the Glass ?
Arthur -- Sunday, 15 April 2001, at 7:23 p.m.
9 messages -- Newest posted Tuesday, 17 April 2001, at 3:35 a.m.

Marganser Meets Water *Pic*
Angela Watson -- Sunday, 15 April 2001, at 7:42 p.m.
16 messages -- Newest posted Wednesday, 18 April 2001, at 7:30 a.m.

You be the judge *Pic*
Pete Rudie -- Sunday, 15 April 2001, at 9:34 p.m.
6 messages -- Newest posted Tuesday, 17 April 2001, at 2:42 p.m.

kayak plans for sale
Emerald Estock -- Sunday, 15 April 2001, at 10:14 p.m.
1 message

Kayak boatbuilding schools or classes
Philip Madison -- Monday, 16 April 2001, at 12:47 p.m.
2 messages -- Newest posted Monday, 16 April 2001, at 1:35 p.m.

Great Billed Awk hull almost stripped
Matt Thyer -- Monday, 16 April 2001, at 3:04 p.m.
5 messages -- Newest posted Wednesday, 18 April 2001, at 1:59 p.m.

Greenland Paddle Finish
Fritz O'Connor -- Monday, 16 April 2001, at 5:42 p.m.
17 messages -- Newest posted Thursday, 19 April 2001, at 3:48 p.m.

stitch and glue kayak,
ryan -- Monday, 16 April 2001, at 8:00 p.m.
6 messages -- Newest posted Wednesday, 18 April 2001, at 10:10 a.m.

Double-Open Walrus Cockpit ?
Rehd -- Monday, 16 April 2001, at 8:30 p.m.
10 messages -- Newest posted Tuesday, 17 April 2001, at 11:54 p.m.

Varnishing an Artic Tern
Charles -- Monday, 16 April 2001, at 9:29 p.m.
8 messages -- Newest posted Tuesday, 17 April 2001, at 7:15 p.m.

Bubbles or Broken Filaments?
Dwight -- Monday, 16 April 2001, at 10:05 p.m.
1 message

Samples to dye for *Pic*
Bill Price -- Tuesday, 17 April 2001, at 2:02 a.m.
4 messages -- Newest posted Friday, 20 April 2001, at 9:50 a.m.

Glass draping.
John Monfoe -- Tuesday, 17 April 2001, at 6:52 a.m.
2 messages -- Newest posted Tuesday, 17 April 2001, at 7:17 p.m.

Stripping & Musing
Jim Martin -- Tuesday, 17 April 2001, at 10:12 a.m.
4 messages -- Newest posted Tuesday, 17 April 2001, at 1:13 p.m.

Another one (almost) hits the water *Pic*
Doug -- Tuesday, 17 April 2001, at 2:28 p.m.
8 messages -- Newest posted Wednesday, 18 April 2001, at 10:59 p.m.

More boat pics *Pic*
Doug -- Tuesday, 17 April 2001, at 3:12 p.m.
3 messages -- Newest posted Wednesday, 18 April 2001, at 9:36 p.m.

one more for fun *Pic*
Doug -- Tuesday, 17 April 2001, at 3:15 p.m.
8 messages -- Newest posted Thursday, 19 April 2001, at 1:20 p.m.

Cape Ann Finished *Pic*
Mitch Isoe -- Tuesday, 17 April 2001, at 7:42 p.m.
17 messages -- Newest posted Sunday, 22 April 2001, at 1:17 a.m.

New to this........weight issues
MIchael P Snow -- Tuesday, 17 April 2001, at 9:19 p.m.
21 messages -- Newest posted Friday, 20 April 2001, at 8:03 p.m.

filling staple holes
R Byers -- Tuesday, 17 April 2001, at 10:05 p.m.
5 messages -- Newest posted Wednesday, 18 April 2001, at 6:34 p.m.

Montreal strip builder?
Johan Wirsén -- Wednesday, 18 April 2001, at 5:54 a.m.
1 message

Sea Spirit Ready To Varnish *Pic*
Bobby Curtis -- Wednesday, 18 April 2001, at 11:28 a.m.
18 messages -- Newest posted Thursday, 19 April 2001, at 10:10 p.m.

Bandsawing strips worked well Rehd
Scott E. Davis -- Wednesday, 18 April 2001, at 1:49 p.m.
9 messages -- Newest posted Thursday, 19 April 2001, at 3:58 p.m.

NorthBay deck glass
peter -- Wednesday, 18 April 2001, at 1:57 p.m.
5 messages -- Newest posted Thursday, 19 April 2001, at 9:03 a.m.

'glass repair questions
garland reese -- Wednesday, 18 April 2001, at 2:31 p.m.
1 message

Anybody Want a Grebe?
Grant Goltz -- Wednesday, 18 April 2001, at 2:48 p.m.
9 messages -- Newest posted Wednesday, 18 April 2001, at 8:47 p.m.

Glassing questions
John Monfoe -- Wednesday, 18 April 2001, at 6:12 p.m.
5 messages -- Newest posted Friday, 20 April 2001, at 7:15 a.m.

Glassing the inside of the hull?
Steve -- Wednesday, 18 April 2001, at 6:46 p.m.
8 messages -- Newest posted Thursday, 19 April 2001, at 8:51 a.m.

Super ROS Pads!
Jim McCool -- Wednesday, 18 April 2001, at 8:04 p.m.
2 messages -- Newest posted Thursday, 19 April 2001, at 3:43 p.m.

What to use with wood flour to fill cracks
R Byers -- Wednesday, 18 April 2001, at 9:57 p.m.
7 messages -- Newest posted Sunday, 22 April 2001, at 12:17 p.m.

Finally Final Hull Strip....now for the sander!... *Pic*
Ron Hagedorn -- Wednesday, 18 April 2001, at 10:52 p.m.
3 messages -- Newest posted Friday, 20 April 2001, at 12:20 a.m.

Cockpit size
Elliott -- Thursday, 19 April 2001, at 9:25 a.m.
13 messages -- Newest posted Friday, 20 April 2001, at 2:24 p.m.

building order?
sage -- Thursday, 19 April 2001, at 10:22 a.m.
28 messages -- Newest posted Monday, 23 April 2001, at 5:20 a.m.

Doublecheck Fort Worden Reservations OT
Ray Port Angeles -- Thursday, 19 April 2001, at 11:25 a.m.
6 messages -- Newest posted Friday, 20 April 2001, at 12:33 p.m.

Mimicell foam sources
Todd -- Thursday, 19 April 2001, at 11:34 a.m.
10 messages -- Newest posted Friday, 20 April 2001, at 10:43 p.m.

Footbraces and Bulkhead questions
Steve -- Thursday, 19 April 2001, at 1:21 p.m.
10 messages -- Newest posted Monday, 23 April 2001, at 8:44 p.m.

ckeekako
dave -- Thursday, 19 April 2001, at 4:06 p.m.
1 message

Example of Laughing Loon Service :-)
Arthur -- Thursday, 19 April 2001, at 4:28 p.m.
6 messages -- Newest posted Thursday, 19 April 2001, at 11:53 p.m.

Goerge putz's 17 footer
David Blodgett -- Thursday, 19 April 2001, at 6:56 p.m.
9 messages -- Newest posted Friday, 20 April 2001, at 6:59 p.m.

new floating RIVER HAZARD!!!
mike allen ---> -- Thursday, 19 April 2001, at 10:00 p.m.
4 messages -- Newest posted Friday, 20 April 2001, at 3:17 p.m.

valve for float bags and shawn
mike allen ---> -- Thursday, 19 April 2001, at 11:41 p.m.
3 messages -- Newest posted Friday, 20 April 2001, at 12:31 p.m.

Wetting out tape on Pygmy butt joints
Shawn Baker -- Friday, 20 April 2001, at 10:08 a.m.
21 messages -- Newest posted Monday, 23 April 2001, at 3:12 p.m.

Gummed up sandpaper
J Farris -- Friday, 20 April 2001, at 10:27 a.m.
6 messages -- Newest posted Friday, 20 April 2001, at 7:24 p.m.

SpokeShaveBladePosition
peter -- Friday, 20 April 2001, at 11:54 a.m.
4 messages -- Newest posted Saturday, 21 April 2001, at 12:50 a.m.

Cost of strips?
Kory -- Friday, 20 April 2001, at 12:36 p.m.
4 messages -- Newest posted Friday, 20 April 2001, at 4:00 p.m.

cockpit size/shape
Jim -- Friday, 20 April 2001, at 1:47 p.m.
8 messages -- Newest posted Sunday, 22 April 2001, at 12:21 a.m.

durham water putty???
peter czerpak -- Friday, 20 April 2001, at 2:09 p.m.
11 messages -- Newest posted Tuesday, 24 April 2001, at 7:00 p.m.

Sanding epoxy
John Monfoe -- Friday, 20 April 2001, at 3:47 p.m.
13 messages -- Newest posted Friday, 27 April 2001, at 6:49 a.m.

Seguin Kayak
Jim Distler -- Friday, 20 April 2001, at 9:37 p.m.
10 messages -- Newest posted Monday, 23 April 2001, at 12:22 a.m.

stainless steel rudder
bryan -- Saturday, 21 April 2001, at 1:15 a.m.
8 messages -- Newest posted Monday, 23 April 2001, at 6:03 p.m.

Help~removing contact cement?
Larry C. -- Saturday, 21 April 2001, at 8:12 a.m.
8 messages -- Newest posted Sunday, 22 April 2001, at 5:12 a.m.

No putting it off any longer
Jim Pace -- Saturday, 21 April 2001, at 8:24 a.m.
5 messages -- Newest posted Sunday, 22 April 2001, at 7:23 a.m.

offsets to corel 8.0
dean -- Saturday, 21 April 2001, at 5:07 p.m.
9 messages -- Newest posted Monday, 23 April 2001, at 9:58 p.m.

Cheap Minicell Foam Source
Greg Hughes -- Saturday, 21 April 2001, at 10:21 p.m.
5 messages -- Newest posted Tuesday, 24 April 2001, at 6:28 p.m.

while thinking on minicell
sage -- Saturday, 21 April 2001, at 11:35 p.m.
5 messages -- Newest posted Sunday, 22 April 2001, at 2:36 p.m.

fiberglass satin weave runs
David -- Sunday, 22 April 2001, at 2:28 a.m.
7 messages -- Newest posted Sunday, 22 April 2001, at 7:07 p.m.

Back to work
Ken Sutherland -- Sunday, 22 April 2001, at 4:22 a.m.
3 messages -- Newest posted Tuesday, 1 May 2001, at 12:04 p.m.

Just out of interest...
Mike Field. -- Sunday, 22 April 2001, at 4:31 a.m.
2 messages -- Newest posted Monday, 23 April 2001, at 1:10 a.m.

Paddle float foam
Don Campbell -- Sunday, 22 April 2001, at 9:05 a.m.
18 messages -- Newest posted Friday, 27 April 2001, at 1:48 p.m.

bias problems
Ron W. -- Sunday, 22 April 2001, at 4:44 p.m.
2 messages -- Newest posted Sunday, 22 April 2001, at 9:20 p.m.

Walrus Ready to Skin... Opps *Pic*
Rehd -- Sunday, 22 April 2001, at 11:17 p.m.
11 messages -- Newest posted Tuesday, 24 April 2001, at 2:35 a.m.

Stapleless - The Next Generation *Pic*
Chip Sandresky -- Monday, 23 April 2001, at 3:02 a.m.
3 messages -- Newest posted Monday, 23 April 2001, at 11:33 a.m.

opaque epoxy
richard -- Monday, 23 April 2001, at 3:40 a.m.
3 messages -- Newest posted Monday, 23 April 2001, at 1:35 p.m.

Bought cheap closed cell insulation.
John Monfoe -- Monday, 23 April 2001, at 5:59 a.m.
7 messages -- Newest posted Wednesday, 25 April 2001, at 5:31 a.m.

Need Easy Rider Kayak retrofitted
Grant Erwin -- Monday, 23 April 2001, at 8:38 a.m.
1 message

Joining hull and deck with no hatches
Richard Boyle -- Monday, 23 April 2001, at 9:39 a.m.
2 messages -- Newest posted Monday, 23 April 2001, at 12:22 p.m.

Tie Die SOF
Max -- Monday, 23 April 2001, at 11:17 a.m.
8 messages -- Newest posted Monday, 23 April 2001, at 8:46 p.m.

ROS and shop vac
peter czerpak -- Monday, 23 April 2001, at 11:24 a.m.
15 messages -- Newest posted Tuesday, 24 April 2001, at 8:46 a.m.

Material for forms
Mike Boren -- Monday, 23 April 2001, at 12:15 p.m.
12 messages -- Newest posted Wednesday, 25 April 2001, at 11:37 a.m.

Varnish question
David -- Monday, 23 April 2001, at 1:24 p.m.
5 messages -- Newest posted Tuesday, 24 April 2001, at 10:31 a.m.

cloudy/milky epoxy
Bruce -- Monday, 23 April 2001, at 3:33 p.m.
4 messages -- Newest posted Tuesday, 24 April 2001, at 8:55 a.m.

Ciba's Araldite epoxy resin
Marcelo -- Monday, 23 April 2001, at 5:03 p.m.
2 messages -- Newest posted Tuesday, 24 April 2001, at 10:16 p.m.

Paint instead of Varnish
Matt Thyer -- Monday, 23 April 2001, at 7:31 p.m.
5 messages -- Newest posted Tuesday, 24 April 2001, at 8:48 p.m.

CLC 17 Light Kit for Sale
Douglas Engel -- Monday, 23 April 2001, at 7:42 p.m.
1 message

Epoxy - Is Temperature Everything?
Dwight -- Monday, 23 April 2001, at 11:01 p.m.
5 messages -- Newest posted Tuesday, 24 April 2001, at 9:52 a.m.

Black bungie chord source in Everett, WA
Dale Frolander -- Tuesday, 24 April 2001, at 1:52 a.m.
1 message

Square hatch cutouts
Dale Frolander -- Tuesday, 24 April 2001, at 2:02 a.m.
5 messages -- Newest posted Wednesday, 25 April 2001, at 4:09 a.m.

Double braided black 1/8" rope?
Dale Frolander -- Tuesday, 24 April 2001, at 2:07 a.m.
8 messages -- Newest posted Friday, 27 April 2001, at 11:19 a.m.

I really like my scraper
John Monfoe -- Tuesday, 24 April 2001, at 7:03 a.m.
8 messages -- Newest posted Wednesday, 25 April 2001, at 7:47 a.m.

ADMIN! Password Problem
Nick Schade - Board Administrator -- Tuesday, 24 April 2001, at 6:22 p.m.
5 messages -- Newest posted Wednesday, 25 April 2001, at 12:42 a.m.

epoxy - freezing?
David Blodgett -- Tuesday, 24 April 2001, at 9:15 p.m.
7 messages -- Newest posted Wednesday, 25 April 2001, at 8:55 p.m.

Trimming cockpit recess
sage -- Tuesday, 24 April 2001, at 11:08 p.m.
9 messages -- Newest posted Thursday, 26 April 2001, at 11:02 a.m.

Rudder
Gary r -- Wednesday, 25 April 2001, at 12:58 a.m.
5 messages -- Newest posted Wednesday, 25 April 2001, at 7:53 p.m.

Fledgling Walrus 18 1/2'er is Born *Pic*
Rehd -- Wednesday, 25 April 2001, at 1:53 a.m.
5 messages -- Newest posted Sunday, 29 April 2001, at 1:58 a.m.

Hull splotches. *Pic*
John Monfoe -- Wednesday, 25 April 2001, at 6:57 a.m.
16 messages -- Newest posted Monday, 30 April 2001, at 7:59 p.m.

The value of this board
Bruce -- Wednesday, 25 April 2001, at 7:38 a.m.
1 message

How do I make the hatches waterproof?
fritjof karlsson -- Wednesday, 25 April 2001, at 7:55 a.m.
8 messages -- Newest posted Thursday, 26 April 2001, at 4:37 p.m.

Blending old and new oil finishes?
Brian Nystrom -- Wednesday, 25 April 2001, at 8:31 a.m.
14 messages -- Newest posted Friday, 27 April 2001, at 6:46 a.m.

"Meet at the Beach" listing in WB
Rob Macks -- Wednesday, 25 April 2001, at 11:56 a.m.
12 messages -- Newest posted Friday, 27 April 2001, at 10:25 p.m.

Pesky Kids *Pic*
Chip Sandresky -- Wednesday, 25 April 2001, at 12:34 p.m.
4 messages -- Newest posted Wednesday, 25 April 2001, at 2:29 p.m.

Record Spokeshave Tuning Questions
Brian Nystrom -- Wednesday, 25 April 2001, at 12:57 p.m.
12 messages -- Newest posted Friday, 27 April 2001, at 6:43 a.m.

US Composites Epoxy; first impressions
david -- Wednesday, 25 April 2001, at 4:08 p.m.
2 messages -- Newest posted Thursday, 26 April 2001, at 9:28 a.m.

Router Bits
Jason -- Wednesday, 25 April 2001, at 4:34 p.m.
13 messages -- Newest posted Thursday, 26 April 2001, at 7:44 p.m.

stich&glue/fiberglass
don dupere -- Wednesday, 25 April 2001, at 6:14 p.m.
7 messages -- Newest posted Sunday, 29 April 2001, at 10:48 p.m.

Thanks For Epoxy Help
Dwight -- Wednesday, 25 April 2001, at 7:58 p.m.
1 message

Thin kerf jig saw blade for hatch cutouts?
Steve -- Wednesday, 25 April 2001, at 8:23 p.m.
6 messages -- Newest posted Thursday, 26 April 2001, at 5:13 p.m.

Web site update
Doug K. -- Thursday, 26 April 2001, at 12:03 a.m.
6 messages -- Newest posted Thursday, 26 April 2001, at 7:12 p.m.

congrats to grant!
brett (the hitman hart)onnink -- Thursday, 26 April 2001, at 9:19 a.m.
3 messages -- Newest posted Sunday, 29 April 2001, at 5:13 p.m.

router recommedations
Lee Gardner -- Thursday, 26 April 2001, at 9:41 a.m.
18 messages -- Newest posted Friday, 27 April 2001, at 9:58 a.m.

Steel wool and varnish
David -- Thursday, 26 April 2001, at 3:06 p.m.
4 messages -- Newest posted Thursday, 3 May 2001, at 1:22 p.m.

bungie holddown source
peter -- Thursday, 26 April 2001, at 3:07 p.m.
6 messages -- Newest posted Friday, 27 April 2001, at 12:38 p.m.

Paddle ferrules
David -- Thursday, 26 April 2001, at 3:09 p.m.
3 messages -- Newest posted Thursday, 26 April 2001, at 10:48 p.m.

Mahogany Strips-Will it work?
Tim LaGosh -- Thursday, 26 April 2001, at 5:03 p.m.
23 messages -- Newest posted Friday, 27 April 2001, at 7:59 p.m.

deck glass, trim and sand?
peter -- Thursday, 26 April 2001, at 5:52 p.m.
4 messages -- Newest posted Friday, 27 April 2001, at 10:04 a.m.

kiddie SOF website question
Dean Trexel -- Thursday, 26 April 2001, at 6:16 p.m.
10 messages -- Newest posted Wednesday, 2 May 2001, at 6:26 p.m.

spanish cedar
sage -- Friday, 27 April 2001, at 12:01 a.m.
3 messages -- Newest posted Thursday, 3 May 2001, at 1:21 p.m.

Ohio event *Pic*
Ross Leidy -- Friday, 27 April 2001, at 9:26 a.m.
10 messages -- Newest posted Monday, 30 April 2001, at 3:19 p.m.

Guzzler 400
Bill Sivori -- Friday, 27 April 2001, at 10:34 a.m.
16 messages -- Newest posted Tuesday, 17 July 2001, at 9:00 p.m.

wrongful ways of a virgin stripper
Chris Menard -- Friday, 27 April 2001, at 11:36 a.m.
2 messages -- Newest posted Friday, 27 April 2001, at 8:23 p.m.

Cedar Paddle Shaft
Greg Hicks -- Friday, 27 April 2001, at 1:54 p.m.
5 messages -- Newest posted Thursday, 3 May 2001, at 5:52 a.m.

Molding as alternative material for coaming lip?
Charlotte Swol -- Friday, 27 April 2001, at 2:22 p.m.
6 messages -- Newest posted Monday, 30 April 2001, at 12:25 p.m.

Plans for home built paddles
David -- Friday, 27 April 2001, at 3:36 p.m.
3 messages -- Newest posted Friday, 27 April 2001, at 10:11 p.m.

glassing deck-first time mistakes!
Scott -- Friday, 27 April 2001, at 4:27 p.m.
7 messages -- Newest posted Saturday, 28 April 2001, at 2:50 a.m.

hand planes
Russell Brown -- Friday, 27 April 2001, at 6:45 p.m.
3 messages -- Newest posted Monday, 30 April 2001, at 10:39 a.m.

Hatch Sealing Channels
Scott Dollmeyer -- Friday, 27 April 2001, at 8:35 p.m.
8 messages -- Newest posted Saturday, 28 April 2001, at 3:41 p.m.

I found L-200 minicell for $3.34 per ft.
sage -- Saturday, 28 April 2001, at 12:55 a.m.
4 messages -- Newest posted Saturday, 28 April 2001, at 2:36 a.m.

Extra fiberglass reinforcements
John Monfoe -- Saturday, 28 April 2001, at 4:00 a.m.
2 messages -- Newest posted Saturday, 28 April 2001, at 2:56 p.m.

Rope as a coaming lip
Dave Seales -- Saturday, 28 April 2001, at 7:49 a.m.
3 messages -- Newest posted Saturday, 28 April 2001, at 5:46 p.m.

To glue nylon to foam?
Don Beale -- Saturday, 28 April 2001, at 10:57 a.m.
4 messages -- Newest posted Monday, 30 April 2001, at 2:32 a.m.

taping outside seam
Jim Pace -- Saturday, 28 April 2001, at 11:05 a.m.
12 messages -- Newest posted Sunday, 29 April 2001, at 12:37 p.m.

sneak peek *Pic*
elliott -- Saturday, 28 April 2001, at 5:09 p.m.
10 messages -- Newest posted Monday, 30 April 2001, at 9:09 p.m.

varnish question
Larry C. -- Saturday, 28 April 2001, at 6:47 p.m.
3 messages -- Newest posted Monday, 30 April 2001, at 11:27 a.m.

Hatch Sealing Channels II *Pic*
Scott Dollmeyer -- Saturday, 28 April 2001, at 6:47 p.m.
3 messages -- Newest posted Sunday, 29 April 2001, at 10:57 a.m.

Cutting Strips: Kerf Pinching The Saw Blade
Ken -- Sunday, 29 April 2001, at 7:35 a.m.
13 messages -- Newest posted Tuesday, 1 May 2001, at 3:17 a.m.

Coaming Profile
Mike Nicholson -- Sunday, 29 April 2001, at 9:43 a.m.
3 messages -- Newest posted Monday, 30 April 2001, at 11:42 a.m.

removing bad glass
Bruce -- Sunday, 29 April 2001, at 9:51 a.m.
5 messages -- Newest posted Sunday, 29 April 2001, at 9:25 p.m.

Varnish vs Varathane
Rob Nickel -- Sunday, 29 April 2001, at 9:55 a.m.
5 messages -- Newest posted Wednesday, 2 May 2001, at 2:14 p.m.

An Epoxy tip... use vinegar for cleanup.
Jim Corliss -- Sunday, 29 April 2001, at 5:15 p.m.
3 messages -- Newest posted Sunday, 29 April 2001, at 9:22 p.m.

epoxy freezing test
David Blodgett -- Sunday, 29 April 2001, at 7:08 p.m.
3 messages -- Newest posted Monday, 30 April 2001, at 12:59 p.m.

stern bulkhead
David -- Sunday, 29 April 2001, at 11:49 p.m.
6 messages -- Newest posted Monday, 30 April 2001, at 2:55 p.m.

New web site *Pic*
Mike Hanks -- Monday, 30 April 2001, at 12:29 a.m.
4 messages -- Newest posted Tuesday, 1 May 2001, at 12:44 a.m.

Stupid Mistake
Bill Sivori -- Monday, 30 April 2001, at 8:40 a.m.
38 messages -- Newest posted Thursday, 3 May 2001, at 1:05 p.m.

Clip art under glass, How to?
Mike -- Monday, 30 April 2001, at 9:59 a.m.
6 messages -- Newest posted Tuesday, 1 May 2001, at 7:42 p.m.

Harbor Freight or other good scraper
Scott E. Davis -- Monday, 30 April 2001, at 1:29 p.m.
12 messages -- Newest posted Wednesday, 2 May 2001, at 12:29 p.m.

Bad Varnish Day
Byron -- Monday, 30 April 2001, at 4:36 p.m.
1 message

Roy Folland Kayaks
Dale R. Beatty -- Monday, 30 April 2001, at 4:52 p.m.
1 message

Where is....
Joel -- Monday, 30 April 2001, at 10:21 p.m.
76 messages -- Newest posted Tuesday, 8 May 2001, at 11:02 p.m.

Great service
Tom-Atlanta -- Tuesday, 1 May 2001, at 2:03 a.m.
6 messages -- Newest posted Wednesday, 2 May 2001, at 10:51 a.m.

Bilge pump holders *Pic*
Dale Frolander -- Tuesday, 1 May 2001, at 5:39 a.m.
8 messages -- Newest posted Friday, 4 May 2001, at 7:42 a.m.

stripping around cockpit
elliott -- Tuesday, 1 May 2001, at 9:11 a.m.
3 messages -- Newest posted Tuesday, 1 May 2001, at 11:38 a.m.

I'm Telling on Dale
Ben Staley -- Tuesday, 1 May 2001, at 10:33 a.m.
6 messages -- Newest posted Wednesday, 2 May 2001, at 5:55 a.m.

Mill Creek stitch & strip *Pic*
david -- Tuesday, 1 May 2001, at 12:57 p.m.
2 messages -- Newest posted Wednesday, 2 May 2001, at 6:56 p.m.

To wax or not to wax, .....
David -- Tuesday, 1 May 2001, at 3:19 p.m.
2 messages -- Newest posted Tuesday, 1 May 2001, at 5:34 p.m.

glassing on top of sanding
mikey h -- Tuesday, 1 May 2001, at 5:18 p.m.
4 messages -- Newest posted Wednesday, 2 May 2001, at 4:21 p.m.

Canned Seats for a Kayak
Scott Dollmeyer -- Tuesday, 1 May 2001, at 5:33 p.m.
11 messages -- Newest posted Thursday, 3 May 2001, at 12:02 a.m.

thin spot in bow
sage -- Wednesday, 2 May 2001, at 12:05 a.m.
2 messages -- Newest posted Wednesday, 2 May 2001, at 2:29 a.m.

User Profiles
Dale Frolander -- Wednesday, 2 May 2001, at 5:59 a.m.
6 messages -- Newest posted Wednesday, 2 May 2001, at 12:36 p.m.

Great Bulletin Board
Chuck Birch -- Wednesday, 2 May 2001, at 8:58 a.m.
34 messages -- Newest posted Thursday, 10 May 2001, at 7:24 a.m.

What cleaner to remove tape residue
Steve -- Wednesday, 2 May 2001, at 9:01 a.m.
6 messages -- Newest posted Saturday, 5 May 2001, at 5:12 p.m.

How much force is on a bungee for a Leidy Hatch
Andreas Albat -- Wednesday, 2 May 2001, at 5:45 p.m.
5 messages -- Newest posted Thursday, 3 May 2001, at 6:39 p.m.

first varnish coat
Ron Wiebe -- Wednesday, 2 May 2001, at 11:55 p.m.
2 messages -- Newest posted Thursday, 3 May 2001, at 12:12 p.m.

Re: Hey Rob, lighten up a bit, OK?
Rehd -- Thursday, 3 May 2001, at 9:42 a.m.
1 message

Scarfing strips?
Jason Koldewijn -- Thursday, 3 May 2001, at 1:18 p.m.
11 messages -- Newest posted Friday, 4 May 2001, at 12:14 a.m.

first strip fairing question:
Scott E. Davis -- Thursday, 3 May 2001, at 1:48 p.m.
4 messages -- Newest posted Friday, 4 May 2001, at 1:52 p.m.

How much epoxy
Halgeir -- Thursday, 3 May 2001, at 2:00 p.m.
5 messages -- Newest posted Friday, 4 May 2001, at 6:14 p.m.

Determining cockpit size
Steve -- Thursday, 3 May 2001, at 3:48 p.m.
5 messages -- Newest posted Thursday, 3 May 2001, at 6:46 p.m.

You've encouraged too much!
Chuck Birch -- Thursday, 3 May 2001, at 3:50 p.m.
11 messages -- Newest posted Friday, 4 May 2001, at 1:19 a.m.

Looking for builder in Twin Cities
Troy T. -- Thursday, 3 May 2001, at 4:00 p.m.
5 messages -- Newest posted Friday, 4 May 2001, at 11:29 p.m.

Strongback Materials
Clive Higgins -- Thursday, 3 May 2001, at 4:48 p.m.
2 messages -- Newest posted Thursday, 3 May 2001, at 11:24 p.m.

Hello Again!
Tim Stough -- Thursday, 3 May 2001, at 6:37 p.m.
4 messages -- Newest posted Thursday, 3 May 2001, at 9:27 p.m.

Last epoxy coat and first varnish coat advise
Ed -- Thursday, 3 May 2001, at 10:18 p.m.
3 messages -- Newest posted Friday, 4 May 2001, at 11:24 a.m.

is there a free photo host out there?
sage -- Thursday, 3 May 2001, at 10:33 p.m.
6 messages -- Newest posted Friday, 4 May 2001, at 7:51 a.m.

Tape and hot glue conflicts.
Jason Koldewijn -- Thursday, 3 May 2001, at 10:51 p.m.
3 messages -- Newest posted Friday, 4 May 2001, at 12:27 p.m.

Source for closed cell foam for hatches
Andreas Albat -- Friday, 4 May 2001, at 12:36 a.m.
3 messages -- Newest posted Friday, 4 May 2001, at 10:47 a.m.

Spots on the finish
Mike -- Friday, 4 May 2001, at 1:26 a.m.
8 messages -- Newest posted Saturday, 5 May 2001, at 10:07 p.m.

New Guillemot, New Builders!
Rick Mitchell -- Friday, 4 May 2001, at 1:40 a.m.
3 messages -- Newest posted Friday, 4 May 2001, at 5:37 p.m.

rubstrips
Tony Ornatek -- Friday, 4 May 2001, at 9:57 a.m.
6 messages -- Newest posted Tuesday, 8 May 2001, at 8:37 p.m.

BATTERY POWERED BILGE PUMP
Steve Tilders -- Friday, 4 May 2001, at 10:35 a.m.
14 messages -- Newest posted Monday, 7 May 2001, at 9:49 a.m.

combing first or block plane first?
Ross W. -- Friday, 4 May 2001, at 11:48 a.m.
2 messages -- Newest posted Friday, 4 May 2001, at 12:41 p.m.

pictures (maybe) *Pic*
David -- Friday, 4 May 2001, at 11:57 a.m.
13 messages -- Newest posted Monday, 7 May 2001, at 8:06 p.m.

Picture Posting (Testing) *Pic*
Greg Hicks -- Friday, 4 May 2001, at 12:35 p.m.
6 messages -- Newest posted Friday, 4 May 2001, at 5:16 p.m.

Cockpit Form on ES
Elliott -- Friday, 4 May 2001, at 12:48 p.m.
3 messages -- Newest posted Friday, 4 May 2001, at 10:09 p.m.

winters projects finally completed *Pic*
edgar -- Friday, 4 May 2001, at 1:57 p.m.
9 messages -- Newest posted Monday, 7 May 2001, at 1:56 p.m.

Mechanical properties?
Jason Koldewijn -- Friday, 4 May 2001, at 7:23 p.m.
3 messages -- Newest posted Saturday, 5 May 2001, at 7:57 p.m.

What a great guy!!!
Roy Morford -- Friday, 4 May 2001, at 10:00 p.m.
2 messages -- Newest posted Saturday, 5 May 2001, at 4:45 a.m.

progress (pic test) *Pic*
sage -- Saturday, 5 May 2001, at 2:10 a.m.
3 messages -- Newest posted Saturday, 5 May 2001, at 9:23 a.m.

paddle testing
Don Beale -- Saturday, 5 May 2001, at 2:26 a.m.
5 messages -- Newest posted Sunday, 6 May 2001, at 12:30 a.m.

First Time In Water. *Pic*
John Monfoe -- Saturday, 5 May 2001, at 7:17 a.m.
10 messages -- Newest posted Thursday, 10 May 2001, at 7:19 a.m.

End Pour Technique
Mitch Isoe -- Saturday, 5 May 2001, at 9:02 a.m.
4 messages -- Newest posted Tuesday, 8 May 2001, at 2:54 p.m.

router shopping
daren neufeld -- Saturday, 5 May 2001, at 10:19 a.m.
3 messages -- Newest posted Sunday, 6 May 2001, at 7:58 a.m.

New Guillemot, New Builders! - More
Rick Mitchell -- Saturday, 5 May 2001, at 10:48 a.m.
7 messages -- Newest posted Wednesday, 9 May 2001, at 6:47 a.m.

stitch and glue tender
patrick -- Saturday, 5 May 2001, at 6:53 p.m.
7 messages -- Newest posted Wednesday, 9 May 2001, at 2:43 p.m.

LAUNCH!!!
daren neufeld -- Saturday, 5 May 2001, at 9:27 p.m.
3 messages -- Newest posted Saturday, 5 May 2001, at 10:38 p.m.

Sailfish Designs
Paul C. -- Saturday, 5 May 2001, at 9:44 p.m.
3 messages -- Newest posted Sunday, 6 May 2001, at 10:09 a.m.

trying again *Pic*
sage -- Saturday, 5 May 2001, at 11:01 p.m.
5 messages -- Newest posted Monday, 7 May 2001, at 12:46 a.m.

Got a Problem
Jason Koldewijn -- Sunday, 6 May 2001, at 12:41 a.m.
4 messages -- Newest posted Tuesday, 8 May 2001, at 6:28 p.m.

Just Checkin' Photo-Point *Pic*
Rehd -- Sunday, 6 May 2001, at 1:26 a.m.
5 messages -- Newest posted Thursday, 10 May 2001, at 12:33 p.m.

Russ K. said hi and will be back soon. *NM*
John Monfoe -- Sunday, 6 May 2001, at 6:45 a.m.
1 message

and trying agaian *Pic*
sage -- Sunday, 6 May 2001, at 12:38 p.m.
9 messages -- Newest posted Tuesday, 8 May 2001, at 3:00 p.m.

Eater on the water *Pic*
Jack -- Sunday, 6 May 2001, at 7:34 p.m.
3 messages -- Newest posted Sunday, 6 May 2001, at 9:26 p.m.

First varnish coat
Ron Wiebe -- Sunday, 6 May 2001, at 10:59 p.m.
7 messages -- Newest posted Thursday, 10 May 2001, at 9:11 a.m.

Panels not quite fair
bob -- Sunday, 6 May 2001, at 11:01 p.m.
4 messages -- Newest posted Monday, 7 May 2001, at 7:53 p.m.

Hapex epoxy?
sage -- Sunday, 6 May 2001, at 11:05 p.m.
4 messages -- Newest posted Monday, 7 May 2001, at 9:08 p.m.

Anyone using Varathane?
Richard Boyle -- Sunday, 6 May 2001, at 11:21 p.m.
3 messages -- Newest posted Tuesday, 8 May 2001, at 1:04 a.m.

Varnish Advice Needed!!
Byron -- Monday, 7 May 2001, at 10:56 a.m.
18 messages -- Newest posted Thursday, 10 May 2001, at 5:37 p.m.

cloth amount for tape
Chris Menard -- Monday, 7 May 2001, at 11:38 a.m.
3 messages -- Newest posted Monday, 7 May 2001, at 7:03 p.m.

Great Mississippi Race for Rett Syndrome *Pic*
Nick Schade - Guillemot Kayaks -- Monday, 7 May 2001, at 1:16 p.m.
4 messages -- Newest posted Tuesday, 8 May 2001, at 8:51 a.m.

bungie holds source
peter -- Monday, 7 May 2001, at 4:59 p.m.
4 messages -- Newest posted Monday, 14 May 2001, at 11:18 a.m.

Do you name your boats?
Andy Miller -- Monday, 7 May 2001, at 11:35 p.m.
16 messages -- Newest posted Thursday, 10 May 2001, at 9:40 a.m.

WOW this filler is dark!!!!!!!!!
sage -- Tuesday, 8 May 2001, at 2:33 a.m.
13 messages -- Newest posted Sunday, 13 May 2001, at 10:31 p.m.

Seat *Pic*
John Monfoe -- Tuesday, 8 May 2001, at 5:09 a.m.
5 messages -- Newest posted Wednesday, 9 May 2001, at 12:53 p.m.

Kids-Yak launched *Pic*
Matthew Bastian -- Tuesday, 8 May 2001, at 9:40 a.m.
6 messages -- Newest posted Tuesday, 8 May 2001, at 3:13 p.m.

Moving Day
Chip Sandresky -- Tuesday, 8 May 2001, at 12:34 p.m.
18 messages -- Newest posted Sunday, 13 May 2001, at 10:55 a.m.

ROS and polishing
Andreas Albat -- Tuesday, 8 May 2001, at 3:40 p.m.
6 messages -- Newest posted Wednesday, 9 May 2001, at 2:32 p.m.

Staple Removal Techniques
Rick Brannan -- Tuesday, 8 May 2001, at 4:56 p.m.
11 messages -- Newest posted Thursday, 10 May 2001, at 7:51 p.m.

Placement of hatches.
Mike felepchuk -- Tuesday, 8 May 2001, at 6:10 p.m.
9 messages -- Newest posted Wednesday, 9 May 2001, at 8:17 p.m.

Re-Painting
Paul -- Tuesday, 8 May 2001, at 10:12 p.m.
2 messages -- Newest posted Wednesday, 9 May 2001, at 3:02 a.m.

polyester glue?
daren neufeld -- Tuesday, 8 May 2001, at 11:02 p.m.
4 messages -- Newest posted Thursday, 10 May 2001, at 11:28 a.m.

Source for SS T-nuts
Ken Sutherland -- Wednesday, 9 May 2001, at 4:42 a.m.
4 messages -- Newest posted Wednesday, 9 May 2001, at 10:15 p.m.

Strip Planked Balsa?
Marcus -- Wednesday, 9 May 2001, at 5:47 a.m.
8 messages -- Newest posted Friday, 11 May 2001, at 12:53 a.m.

Which brand of epoxy to use?
Mike Boren -- Wednesday, 9 May 2001, at 1:42 p.m.
7 messages -- Newest posted Friday, 11 May 2001, at 9:31 p.m.

Kayak for Sale
Don Gagnon -- Wednesday, 9 May 2001, at 1:58 p.m.
1 message

Any tips on "cheater strips"?
Scott E. Davis -- Wednesday, 9 May 2001, at 2:02 p.m.
14 messages -- Newest posted Monday, 14 May 2001, at 7:18 p.m.

any footpump on foam bulkhead probblems? *NM*
sage -- Wednesday, 9 May 2001, at 3:25 p.m.
3 messages -- Newest posted Wednesday, 9 May 2001, at 9:10 p.m.

S.O.T?
Jason Koldewijn -- Wednesday, 9 May 2001, at 7:54 p.m.
3 messages -- Newest posted Thursday, 10 May 2001, at 2:11 p.m.

Stealing a design *Pic*
Al Gunther -- Wednesday, 9 May 2001, at 8:33 p.m.
34 messages -- Newest posted Monday, 21 May 2001, at 10:22 p.m.

Adding sail & outriggers
M Laird -- Wednesday, 9 May 2001, at 9:04 p.m.
4 messages -- Newest posted Thursday, 10 May 2001, at 7:55 p.m.

Hatch Systems
Ken Sutherland -- Thursday, 10 May 2001, at 12:59 a.m.
10 messages -- Newest posted Tuesday, 15 May 2001, at 4:32 p.m.

Storage Cradles?
Paul Lund -- Thursday, 10 May 2001, at 5:48 a.m.
5 messages -- Newest posted Thursday, 10 May 2001, at 8:34 p.m.

Hatch Lip
Mike Felepchuk -- Thursday, 10 May 2001, at 12:13 p.m.
4 messages -- Newest posted Friday, 11 May 2001, at 9:54 a.m.

durhams putty and color ??
peter czerpak -- Thursday, 10 May 2001, at 12:56 p.m.
10 messages -- Newest posted Monday, 14 May 2001, at 2:50 p.m.

tumblehome
Dave M -- Thursday, 10 May 2001, at 9:09 p.m.
5 messages -- Newest posted Sunday, 13 May 2001, at 10:30 a.m.

Arrrrrg! Rant. How would you handle this?
Robb -- Thursday, 10 May 2001, at 9:18 p.m.
16 messages -- Newest posted Friday, 11 May 2001, at 11:49 a.m.

Oregon Legislation
Brian Wegener -- Thursday, 10 May 2001, at 9:55 p.m.
13 messages -- Newest posted Saturday, 12 May 2001, at 11:52 p.m.

Scenes from Kayaking (slightly OT) *Pic*
Steve -- Friday, 11 May 2001, at 3:14 p.m.
5 messages -- Newest posted Tuesday, 15 May 2001, at 10:44 a.m.

the deck
marc machado -- Friday, 11 May 2001, at 5:15 p.m.
5 messages -- Newest posted Friday, 11 May 2001, at 11:18 p.m.

Guillemot Expedition
Jason Koldewijn -- Friday, 11 May 2001, at 9:37 p.m.
7 messages -- Newest posted Monday, 14 May 2001, at 10:12 a.m.

ANTHROPOMETRIC MEASUREMENTS
Dave M -- Friday, 11 May 2001, at 11:11 p.m.
29 messages -- Newest posted Sunday, 20 May 2001, at 11:02 p.m.

Beckson 8" screw out deck plates *Pic*
John Monfoe -- Saturday, 12 May 2001, at 6:46 a.m.
22 messages -- Newest posted Monday, 14 May 2001, at 6:03 a.m.

How much pollen?
LeeG -- Saturday, 12 May 2001, at 6:40 p.m.
1 message

Re: Stealing a design
j -- Saturday, 12 May 2001, at 10:04 p.m.
2 messages -- Newest posted Sunday, 13 May 2001, at 12:09 a.m.

Finally Floating
Don Campbell -- Sunday, 13 May 2001, at 12:26 a.m.
4 messages -- Newest posted Sunday, 13 May 2001, at 9:34 a.m.

It's Working!! What's This?? O.T. *Pic*
Rehd -- Sunday, 13 May 2001, at 10:37 a.m.
1 message

www.rogernuffer.homepage.com gone
Roger Nuffer -- Sunday, 13 May 2001, at 11:29 a.m.
9 messages -- Newest posted Tuesday, 15 May 2001, at 1:24 p.m.

rounding the deck of a great auk
marc machado -- Sunday, 13 May 2001, at 12:16 p.m.
5 messages -- Newest posted Monday, 14 May 2001, at 10:34 a.m.

Photo-Point Revisited ...... again!! O.T. *Pic*
Rehd -- Sunday, 13 May 2001, at 6:23 p.m.
5 messages -- Newest posted Monday, 14 May 2001, at 6:29 a.m.

Finicky Question
Tom Davies -- Sunday, 13 May 2001, at 11:15 p.m.
7 messages -- Newest posted Monday, 14 May 2001, at 8:44 a.m.

photo posting site *Pic*
Chris Menard -- Monday, 14 May 2001, at 8:56 a.m.
6 messages -- Newest posted Tuesday, 15 May 2001, at 3:50 p.m.

free plans
Davidh -- Monday, 14 May 2001, at 9:30 a.m.
11 messages -- Newest posted Wednesday, 16 May 2001, at 10:24 a.m.

shiney spots and toothpaste
peter -- Monday, 14 May 2001, at 10:02 a.m.
1 message

Posting PhotoPoint Rehd's way. *Pic*
John Monfoe -- Monday, 14 May 2001, at 11:43 a.m.
3 messages -- Newest posted Tuesday, 15 May 2001, at 5:21 a.m.

Nick or rob or ? cheater strips are problem
Scott E. Davis -- Monday, 14 May 2001, at 1:56 p.m.
6 messages -- Newest posted Tuesday, 15 May 2001, at 1:46 p.m.

Is mailorder only way to get fiberglass?
Scott E. Davis -- Monday, 14 May 2001, at 1:59 p.m.
13 messages -- Newest posted Friday, 18 May 2001, at 8:09 p.m.

cutting mincell
peter czerpak -- Monday, 14 May 2001, at 2:59 p.m.
11 messages -- Newest posted Tuesday, 15 May 2001, at 5:12 a.m.

I’ve fallen in love with a non-sentient being *Pic*
Roger Nuffer -- Monday, 14 May 2001, at 3:29 p.m.
4 messages -- Newest posted Tuesday, 15 May 2001, at 1:56 a.m.

R2K+1 OT
Ben Staley -- Monday, 14 May 2001, at 4:37 p.m.
5 messages -- Newest posted Tuesday, 15 May 2001, at 3:27 p.m.

B-day Launch!!!!!!!! *Pic*
Neil Nicol -- Monday, 14 May 2001, at 9:17 p.m.
8 messages -- Newest posted Tuesday, 15 May 2001, at 9:44 a.m.

foam seat mold
sheila -- Monday, 14 May 2001, at 9:30 p.m.
2 messages -- Newest posted Monday, 14 May 2001, at 10:15 p.m.

filling gaps
mark stevens -- Monday, 14 May 2001, at 10:04 p.m.
7 messages -- Newest posted Wednesday, 16 May 2001, at 8:33 a.m.

Celtic knotwork redux
Pete Rudie -- Tuesday, 15 May 2001, at 12:40 p.m.
5 messages -- Newest posted Tuesday, 15 May 2001, at 7:26 p.m.

Cutting Coves: Splintering Of The Edge
Ken -- Tuesday, 15 May 2001, at 5:28 p.m.
9 messages -- Newest posted Sunday, 20 May 2001, at 9:39 p.m.

Spring Run emerges *Pic*
Liz Leedham -- Tuesday, 15 May 2001, at 5:53 p.m.
9 messages -- Newest posted Wednesday, 16 May 2001, at 8:32 a.m.

CPES
Pete Rudie -- Tuesday, 15 May 2001, at 10:29 p.m.
1 message

launch
Don Campbell -- Wednesday, 16 May 2001, at 12:18 a.m.
9 messages -- Newest posted Wednesday, 16 May 2001, at 9:07 p.m.

Do I have enough time...
Kirk_n_AZ -- Wednesday, 16 May 2001, at 12:27 a.m.
36 messages -- Newest posted Monday, 21 May 2001, at 8:19 a.m.

Two Piece Paddle, Paddle Coupler wanted
Matthew -- Wednesday, 16 May 2001, at 2:13 a.m.
6 messages -- Newest posted Thursday, 17 May 2001, at 12:05 a.m.

Greenland Style Paddle, what's the best wood ?
Matthew -- Wednesday, 16 May 2001, at 11:37 a.m.
25 messages -- Newest posted Thursday, 24 May 2001, at 1:29 a.m.

Source for 4" Quick Release Hose Clamps??
Lars Durban -- Wednesday, 16 May 2001, at 1:19 p.m.
3 messages -- Newest posted Wednesday, 16 May 2001, at 4:46 p.m.

Seat Back: Best config? Band or Solid?
fred berg -- Wednesday, 16 May 2001, at 5:07 p.m.
3 messages -- Newest posted Thursday, 17 May 2001, at 9:22 a.m.

glue for plastic
Theo -- Wednesday, 16 May 2001, at 9:34 p.m.
6 messages -- Newest posted Thursday, 17 May 2001, at 12:14 p.m.

Rowing Shells
Jim Reid -- Thursday, 17 May 2001, at 6:33 a.m.
8 messages -- Newest posted Friday, 18 May 2001, at 8:32 a.m.

Who has a waterproof flush hatch!!!!
Andreas Albat -- Thursday, 17 May 2001, at 11:57 a.m.
8 messages -- Newest posted Tuesday, 29 May 2001, at 10:05 a.m.

Heat forming PVC foam
Mike Worthan -- Thursday, 17 May 2001, at 12:17 p.m.
2 messages -- Newest posted Sunday, 20 May 2001, at 11:29 a.m.

Yaks with Baleen cockpit coaming? *Pic*
Ed -- Thursday, 17 May 2001, at 1:41 p.m.
4 messages -- Newest posted Thursday, 17 May 2001, at 4:17 p.m.

Instant glues?
Chuck Birch -- Thursday, 17 May 2001, at 3:15 p.m.
12 messages -- Newest posted Saturday, 19 May 2001, at 9:40 a.m.

Making a spray skirt
Wayne Sanford -- Thursday, 17 May 2001, at 3:52 p.m.
3 messages -- Newest posted Thursday, 17 May 2001, at 5:18 p.m.

Great Stuff Expanding Foam under Seat *Pic*
John Monfoe -- Thursday, 17 May 2001, at 5:32 p.m.
10 messages -- Newest posted Wednesday, 23 May 2001, at 6:25 a.m.

Cheek Plate Size
Mike felepchuk -- Thursday, 17 May 2001, at 10:16 p.m.
33 messages -- Newest posted Monday, 21 May 2001, at 11:27 a.m.

Attaching Guillemot footpeg rails
Richard Boyle -- Friday, 18 May 2001, at 10:07 a.m.
6 messages -- Newest posted Friday, 18 May 2001, at 2:15 p.m.

Need a source for 1/4" shock cord
Steve -- Friday, 18 May 2001, at 11:20 a.m.
4 messages -- Newest posted Monday, 21 May 2001, at 9:15 a.m.

"Stealing" a Design - Get permission
Nick Schade - Guillemot Kayaks -- Friday, 18 May 2001, at 1:16 p.m.
5 messages -- Newest posted Saturday, 19 May 2001, at 8:20 a.m.

Varnish B4 turning the kayak hull over
Kory -- Friday, 18 May 2001, at 4:40 p.m.
3 messages -- Newest posted Friday, 18 May 2001, at 5:45 p.m.

And now for something completely different.....OT
Pete Rudie -- Saturday, 19 May 2001, at 1:44 a.m.
5 messages -- Newest posted Monday, 21 May 2001, at 1:29 p.m.

CLC Chesapeake 16LT
Greg Root -- Saturday, 19 May 2001, at 12:49 p.m.
9 messages -- Newest posted Monday, 21 May 2001, at 11:33 p.m.

paddle tip protection
passinthru -- Saturday, 19 May 2001, at 8:38 p.m.
12 messages -- Newest posted Tuesday, 22 May 2001, at 8:06 p.m.

Got the plans, building the boat.
Davidh -- Sunday, 20 May 2001, at 12:21 a.m.
3 messages -- Newest posted Tuesday, 22 May 2001, at 11:27 a.m.

fiberglass cloth
mark stevens -- Sunday, 20 May 2001, at 11:36 a.m.
4 messages -- Newest posted Tuesday, 22 May 2001, at 11:04 p.m.

Gel Coat For the Bottom
dick kirschbaum -- Sunday, 20 May 2001, at 1:09 p.m.
2 messages -- Newest posted Tuesday, 29 May 2001, at 10:00 a.m.

Fiddlehead canoe?
Glenn m -- Sunday, 20 May 2001, at 6:02 p.m.
6 messages -- Newest posted Monday, 28 May 2001, at 6:22 p.m.

A quickncheap temporary kayak
Bob Deutsch -- Monday, 21 May 2001, at 6:45 a.m.
16 messages -- Newest posted Friday, 25 May 2001, at 5:23 p.m.

White spots in glass *Pic*
Steve -- Monday, 21 May 2001, at 8:12 a.m.
18 messages -- Newest posted Tuesday, 22 May 2001, at 3:41 p.m.

recessed deck fittings
Joe Christian -- Monday, 21 May 2001, at 9:33 a.m.
2 messages -- Newest posted Monday, 21 May 2001, at 11:30 a.m.

Michigan Canoe Regulations
Don -- Monday, 21 May 2001, at 9:56 a.m.
13 messages -- Newest posted Thursday, 24 May 2001, at 9:04 a.m.

Varnishing over uncured epoxy
Greg Hughes -- Monday, 21 May 2001, at 6:08 p.m.
5 messages -- Newest posted Friday, 25 May 2001, at 8:14 a.m.

skin on frame materials
Dave M -- Monday, 21 May 2001, at 9:53 p.m.
4 messages -- Newest posted Thursday, 24 May 2001, at 3:10 a.m.

Kayak Forms For Sale
Scott Dollmeyer -- Monday, 21 May 2001, at 10:53 p.m.
4 messages -- Newest posted Wednesday, 23 May 2001, at 5:51 p.m.

Stainless Tee nuts in Australia
Jon -- Tuesday, 22 May 2001, at 1:39 a.m.
8 messages -- Newest posted Wednesday, 30 May 2001, at 5:48 a.m.

Project X: Please Stand By ... *Pic*
Bill Price -- Tuesday, 22 May 2001, at 1:57 a.m.
3 messages -- Newest posted Wednesday, 23 May 2001, at 12:24 p.m.

Finally stripped
Elliott -- Tuesday, 22 May 2001, at 9:19 a.m.
11 messages -- Newest posted Wednesday, 23 May 2001, at 1:50 p.m.

Security ring
Kent LeBoutillier -- Tuesday, 22 May 2001, at 11:51 a.m.
3 messages -- Newest posted Wednesday, 23 May 2001, at 11:04 p.m.

S&G deck separation?
Chet Lee -- Tuesday, 22 May 2001, at 12:21 p.m.
13 messages -- Newest posted Thursday, 24 May 2001, at 4:24 p.m.

What are you guys paying for cedar?
Doug D. -- Tuesday, 22 May 2001, at 3:05 p.m.
9 messages -- Newest posted Wednesday, 23 May 2001, at 2:09 a.m.

How to repair a wooden kayak
Bluewolf -- Tuesday, 22 May 2001, at 3:09 p.m.
3 messages -- Newest posted Wednesday, 23 May 2001, at 8:13 a.m.

Pnuematic Nailer
Mike Boren -- Tuesday, 22 May 2001, at 6:35 p.m.
6 messages -- Newest posted Thursday, 24 May 2001, at 4:10 p.m.

Question on wood stabilizing
Bob Warner -- Tuesday, 22 May 2001, at 8:13 p.m.
12 messages -- Newest posted Sunday, 27 May 2001, at 12:46 a.m.

looking for a boat
Don -- Tuesday, 22 May 2001, at 8:39 p.m.
6 messages -- Newest posted Saturday, 26 May 2001, at 9:24 a.m.

pine pitch???
Neil Nicol -- Tuesday, 22 May 2001, at 8:58 p.m.
4 messages -- Newest posted Thursday, 24 May 2001, at 3:25 p.m.

is hot glue strong enough for coming?
sage -- Tuesday, 22 May 2001, at 9:08 p.m.
3 messages -- Newest posted Thursday, 24 May 2001, at 12:45 a.m.

respirators and beards
sage -- Tuesday, 22 May 2001, at 9:14 p.m.
11 messages -- Newest posted Sunday, 27 May 2001, at 9:53 a.m.

S&G Launched... *Pic*
Ed -- Wednesday, 23 May 2001, at 12:45 a.m.
13 messages -- Newest posted Saturday, 26 May 2001, at 7:51 p.m.

Canoe thwart plans?
Rod B -- Wednesday, 23 May 2001, at 1:23 a.m.
4 messages -- Newest posted Thursday, 24 May 2001, at 11:36 a.m.

Sneak peek *Pic*
Kent LeBoutillier -- Wednesday, 23 May 2001, at 6:12 a.m.
19 messages -- Newest posted Saturday, 26 May 2001, at 8:25 p.m.

Fill coat on inside of deck / hull? *Pic*
Charlie Lesh -- Wednesday, 23 May 2001, at 8:59 a.m.
4 messages -- Newest posted Wednesday, 23 May 2001, at 4:22 p.m.

What does "OT" mean? *NM* *NM*
Severne -- Wednesday, 23 May 2001, at 11:57 a.m.
2 messages -- Newest posted Wednesday, 23 May 2001, at 12:49 p.m.

Wet sand or dry?
Greg Hughes -- Wednesday, 23 May 2001, at 12:58 p.m.
6 messages -- Newest posted Saturday, 26 May 2001, at 7:44 p.m.

paddle making
Michael -- Wednesday, 23 May 2001, at 6:52 p.m.
4 messages -- Newest posted Thursday, 24 May 2001, at 9:44 a.m.

how much epoxy for guillemot
mark stevens -- Wednesday, 23 May 2001, at 8:24 p.m.
6 messages -- Newest posted Friday, 25 May 2001, at 8:23 a.m.

Jay's new rolling video --- OT
Larry C. -- Wednesday, 23 May 2001, at 9:44 p.m.
7 messages -- Newest posted Friday, 25 May 2001, at 10:37 a.m.

World Record *Pic*
Ross Leidy -- Thursday, 24 May 2001, at 12:05 a.m.
1 message

Hatch hold downs with web loops
Jim Pace -- Thursday, 24 May 2001, at 7:55 a.m.
5 messages -- Newest posted Thursday, 24 May 2001, at 9:01 p.m.

Down to the finish line. *Pic*
Steve -- Thursday, 24 May 2001, at 10:26 a.m.
8 messages -- Newest posted Thursday, 24 May 2001, at 2:23 p.m.

Rear Bulkhead Hatch *Pic*
peter -- Thursday, 24 May 2001, at 3:41 p.m.
3 messages -- Newest posted Thursday, 24 May 2001, at 5:13 p.m.

Leg Powered Kayaks? Come try them out! *Pic*
Ron Drynan -- Thursday, 24 May 2001, at 9:03 p.m.
8 messages -- Newest posted Friday, 25 May 2001, at 10:40 p.m.

Free Ride
Dina Maccabee -- Thursday, 24 May 2001, at 9:45 p.m.
1 message

Foam Kayak Building website
mark shiner -- Thursday, 24 May 2001, at 11:41 p.m.
1 message

Kayak cart plans
Mike Hilt -- Friday, 25 May 2001, at 3:09 a.m.
6 messages -- Newest posted Saturday, 26 May 2001, at 2:58 a.m.

Mini Air Water Regulator
John Monfoe -- Friday, 25 May 2001, at 6:21 a.m.
18 messages -- Newest posted Sunday, 3 June 2001, at 1:15 p.m.

first epoxy experiment
Chris Menard -- Friday, 25 May 2001, at 9:16 a.m.
11 messages -- Newest posted Wednesday, 30 May 2001, at 7:14 a.m.

software for drawing stations
Gordon Snapp -- Friday, 25 May 2001, at 8:24 p.m.
7 messages -- Newest posted Tuesday, 29 May 2001, at 12:29 p.m.

How we launch 'em in Winter *Pic*
!RUSS -- Friday, 25 May 2001, at 8:25 p.m.
4 messages -- Newest posted Wednesday, 30 May 2001, at 3:40 a.m.

roll of fg cloth
Dave M -- Friday, 25 May 2001, at 9:09 p.m.
3 messages -- Newest posted Saturday, 26 May 2001, at 3:19 p.m.

OAR...Not to Be........... ???
Rehd -- Saturday, 26 May 2001, at 9:42 a.m.
14 messages -- Newest posted Tuesday, 29 May 2001, at 6:49 p.m.

external stempiece
mark stevens -- Saturday, 26 May 2001, at 3:18 p.m.
7 messages -- Newest posted Friday, 1 June 2001, at 3:39 p.m.

San Diego Wooden Boat Show June 15, 16, 17
Randy Ames -- Saturday, 26 May 2001, at 8:19 p.m.
1 message

hull glassing question
Sue -- Sunday, 27 May 2001, at 12:14 p.m.
8 messages -- Newest posted Tuesday, 29 May 2001, at 1:26 p.m.

End pour day - finally!
Jim Pace -- Sunday, 27 May 2001, at 12:18 p.m.
4 messages -- Newest posted Monday, 28 May 2001, at 7:39 a.m.

Staining wood
Tom-Atlanta -- Sunday, 27 May 2001, at 2:50 p.m.
5 messages -- Newest posted Tuesday, 29 May 2001, at 3:42 p.m.

stempiece
mark stevens -- Sunday, 27 May 2001, at 4:31 p.m.
1 message

Epoxy thinner
E. McConnell -- Sunday, 27 May 2001, at 7:06 p.m.
6 messages -- Newest posted Wednesday, 30 May 2001, at 8:35 a.m.

So much for flexy paddles
Don Beale -- Monday, 28 May 2001, at 12:29 a.m.
13 messages -- Newest posted Wednesday, 30 May 2001, at 12:09 p.m.

convert double to triple?
joe -- Monday, 28 May 2001, at 10:32 a.m.
9 messages -- Newest posted Tuesday, 29 May 2001, at 10:01 p.m.

Greenland paddle plans
Ken -- Tuesday, 29 May 2001, at 12:40 a.m.
3 messages -- Newest posted Tuesday, 29 May 2001, at 9:07 a.m.

Annapolis wherry; epoxy compatability
Greg Root -- Tuesday, 29 May 2001, at 9:39 a.m.
2 messages -- Newest posted Tuesday, 29 May 2001, at 10:10 a.m.

mold release for polyurethane?
Hank -- Tuesday, 29 May 2001, at 10:23 a.m.
4 messages -- Newest posted Wednesday, 30 May 2001, at 12:03 p.m.

Questions for the North Westerlies OT
!RUSS -- Tuesday, 29 May 2001, at 12:46 p.m.
4 messages -- Newest posted Wednesday, 6 June 2001, at 10:35 a.m.

More Pics to satisfy your fix *Pic*
Dale Frolander -- Tuesday, 29 May 2001, at 2:16 p.m.
11 messages -- Newest posted Wednesday, 30 May 2001, at 5:29 p.m.

retro-fitting yakima footbraces for rudder
LeeG -- Tuesday, 29 May 2001, at 3:01 p.m.
11 messages -- Newest posted Thursday, 31 May 2001, at 12:01 a.m.

Abrasion cloth for keel area?
Steve -- Tuesday, 29 May 2001, at 6:20 p.m.
3 messages -- Newest posted Wednesday, 30 May 2001, at 12:14 p.m.

raka epoxy
sage -- Tuesday, 29 May 2001, at 9:26 p.m.
10 messages -- Newest posted Friday, 1 June 2001, at 8:30 a.m.

shipping costs
sage -- Tuesday, 29 May 2001, at 10:09 p.m.
2 messages -- Newest posted Wednesday, 30 May 2001, at 8:10 a.m.

sof material?
daren neufeld -- Tuesday, 29 May 2001, at 10:48 p.m.
4 messages -- Newest posted Wednesday, 30 May 2001, at 12:26 p.m.

Day hatch closure?
Val Wann -- Wednesday, 30 May 2001, at 12:05 a.m.
3 messages -- Newest posted Wednesday, 30 May 2001, at 11:24 p.m.

Great Auk
Roger Gillick -- Wednesday, 30 May 2001, at 8:14 a.m.
2 messages -- Newest posted Wednesday, 30 May 2001, at 8:40 a.m.

Visible Glass Pattern?
peter -- Wednesday, 30 May 2001, at 4:37 p.m.
8 messages -- Newest posted Friday, 1 June 2001, at 12:22 p.m.

Caribou as a S&G Design
William Paul Clarke -- Wednesday, 30 May 2001, at 5:28 p.m.
9 messages -- Newest posted Monday, 4 June 2001, at 12:44 p.m.

Double *Pic*
Hans Friedel -- Wednesday, 30 May 2001, at 6:21 p.m.
17 messages -- Newest posted Tuesday, 5 June 2001, at 1:24 p.m.

Glue options
Kirk R -- Thursday, 31 May 2001, at 12:40 a.m.
8 messages -- Newest posted Friday, 1 June 2001, at 8:45 p.m.

Fill Coat
Ben Van Enk -- Thursday, 31 May 2001, at 9:41 a.m.
2 messages -- Newest posted Thursday, 31 May 2001, at 2:36 p.m.

first deck strips
peter czerpak -- Thursday, 31 May 2001, at 10:43 a.m.
2 messages -- Newest posted Thursday, 31 May 2001, at 11:17 a.m.

Coaming
Dave H -- Thursday, 31 May 2001, at 11:18 a.m.
6 messages -- Newest posted Thursday, 31 May 2001, at 1:45 p.m.

At least one boat is getting done *Pic*
Chip Sandresky -- Thursday, 31 May 2001, at 12:59 p.m.
4 messages -- Newest posted Monday, 4 June 2001, at 12:08 p.m.

Canvas question
Glenn m -- Thursday, 31 May 2001, at 10:05 p.m.
15 messages -- Newest posted Monday, 4 June 2001, at 5:59 p.m.

Dolphin 14.9 Easyrider Kelvar 49
Bill Richards -- Thursday, 31 May 2001, at 11:21 p.m.
1 message

staining and gluing
midd -- Thursday, 31 May 2001, at 11:41 p.m.
3 messages -- Newest posted Friday, 1 June 2001, at 10:49 a.m.

Self Rescuing kayak --it works.
John Monfoe -- Friday, 1 June 2001, at 6:48 a.m.
6 messages -- Newest posted Monday, 4 June 2001, at 11:40 a.m.

Guillemot completed *Pic*
Jim Reid -- Friday, 1 June 2001, at 9:51 a.m.
25 messages -- Newest posted Monday, 4 June 2001, at 11:59 a.m.

Nice Job!!
Kent LeBoutillier -- Friday, 1 June 2001, at 11:31 a.m.
1 message

z-spar clear polyurethane
LeeG -- Friday, 1 June 2001, at 5:44 p.m.
1 message

Oregon Registration
Phil -- Friday, 1 June 2001, at 10:11 p.m.
11 messages -- Newest posted Monday, 4 June 2001, at 12:33 p.m.

Another Coaming Question
Dave H -- Friday, 1 June 2001, at 11:47 p.m.
2 messages -- Newest posted Saturday, 2 June 2001, at 2:04 a.m.

weight
Eric -- Friday, 1 June 2001, at 11:51 p.m.
9 messages -- Newest posted Thursday, 7 June 2001, at 1:17 a.m.

Door skins... is it inside or outside?
Roger Nuffer -- Saturday, 2 June 2001, at 1:03 a.m.
6 messages -- Newest posted Monday, 4 June 2001, at 5:20 p.m.

Little Auk for large paddlers?
Dan Nelson -- Saturday, 2 June 2001, at 1:17 a.m.
3 messages -- Newest posted Monday, 4 June 2001, at 7:14 p.m.

Finish Question
Steve -- Saturday, 2 June 2001, at 3:43 p.m.
4 messages -- Newest posted Sunday, 3 June 2001, at 8:14 p.m.

Seat for Fiberglass Kayak
Brandon -- Saturday, 2 June 2001, at 4:11 p.m.
4 messages -- Newest posted Sunday, 3 June 2001, at 12:34 p.m.

paint vs. varnish
Shawn -- Saturday, 2 June 2001, at 7:23 p.m.
7 messages -- Newest posted Monday, 4 June 2001, at 8:01 a.m.

plans
thomas armstrong -- Saturday, 2 June 2001, at 9:41 p.m.
2 messages -- Newest posted Sunday, 3 June 2001, at 4:50 p.m.

Flush mount hatch S&G
Bob -- Saturday, 2 June 2001, at 11:21 p.m.
1 message

Message to David Blodgett
Mark -- Sunday, 3 June 2001, at 1:59 a.m.
1 message

does g. dyson have a website? *NM*
daren neufeld -- Sunday, 3 June 2001, at 4:44 p.m.
2 messages -- Newest posted Sunday, 3 June 2001, at 10:41 p.m.

Paddle blades
Doug K. -- Sunday, 3 June 2001, at 7:35 p.m.
9 messages -- Newest posted Tuesday, 5 June 2001, at 12:03 a.m.

Seasock, bulkhead hatches?
Rod B. -- Sunday, 3 June 2001, at 10:24 p.m.
7 messages -- Newest posted Tuesday, 5 June 2001, at 4:43 p.m.

Brands of Duct Tape
Mike Hanks -- Monday, 4 June 2001, at 12:02 a.m.
12 messages -- Newest posted Tuesday, 5 June 2001, at 9:46 p.m.

Epoxy shelf life
Brent Curtis -- Monday, 4 June 2001, at 8:55 a.m.
7 messages -- Newest posted Tuesday, 5 June 2001, at 3:42 p.m.

S&G Skin Hybrid?
peter -- Monday, 4 June 2001, at 12:48 p.m.
15 messages -- Newest posted Friday, 8 June 2001, at 3:35 p.m.

sectional kayaks
Joseph -- Monday, 4 June 2001, at 1:42 p.m.
12 messages -- Newest posted Monday, 11 June 2001, at 2:55 a.m.

Side rescue yak--Picture 1 *Pic*
John Monfoe -- Monday, 4 June 2001, at 3:55 p.m.
17 messages -- Newest posted Saturday, 9 June 2001, at 6:13 a.m.

Spring Run Launched. *Pic*
Doyle -- Monday, 4 June 2001, at 4:57 p.m.
11 messages -- Newest posted Monday, 4 June 2001, at 8:36 p.m.

Paddle Rest?
Frank Malinowski -- Monday, 4 June 2001, at 8:26 p.m.
5 messages -- Newest posted Wednesday, 6 June 2001, at 11:47 a.m.

Maybe By My Fourth Boat
Frank Malinowski -- Monday, 4 June 2001, at 8:29 p.m.
3 messages -- Newest posted Monday, 4 June 2001, at 10:28 p.m.

Lookin' for Fabric/Vinyl
Rehd -- Tuesday, 5 June 2001, at 2:01 a.m.
22 messages -- Newest posted Tuesday, 12 June 2001, at 1:30 a.m.

Re: exactly
LeeG -- Tuesday, 5 June 2001, at 9:26 a.m.
1 message

Buckles
Thomas -- Tuesday, 5 June 2001, at 11:40 a.m.
2 messages -- Newest posted Wednesday, 6 June 2001, at 9:47 p.m.

I Want to Build First Kayak !!!! ADVICE ??
David Elles -- Tuesday, 5 June 2001, at 12:24 p.m.
19 messages -- Newest posted Friday, 8 June 2001, at 5:06 a.m.

Meet at the beach
Jim Distler -- Tuesday, 5 June 2001, at 1:11 p.m.
9 messages -- Newest posted Saturday, 9 June 2001, at 1:04 a.m.

Guillemot L, She ROLLS *Pic*
David Hanson -- Tuesday, 5 June 2001, at 3:51 p.m.
5 messages -- Newest posted Thursday, 7 June 2001, at 11:38 a.m.

pre-cut strip prices?
daren neufeld -- Tuesday, 5 June 2001, at 8:34 p.m.
4 messages -- Newest posted Wednesday, 6 June 2001, at 6:43 a.m.

Bead and Cove source in Southern California ?
Dan Nelson -- Wednesday, 6 June 2001, at 12:39 a.m.
3 messages -- Newest posted Wednesday, 6 June 2001, at 11:32 p.m.

Satalite View PT
Rehd -- Wednesday, 6 June 2001, at 1:00 a.m.
3 messages -- Newest posted Wednesday, 6 June 2001, at 6:50 p.m.

Through-the-Cockpit Internal Hatch Rig *Pic*
!RUSS -- Wednesday, 6 June 2001, at 8:54 a.m.
1 message

Varnish Question
Don Price -- Wednesday, 6 June 2001, at 10:41 a.m.
3 messages -- Newest posted Wednesday, 6 June 2001, at 5:50 p.m.

block plaining concave curve
Ross W. -- Wednesday, 6 June 2001, at 2:39 p.m.
9 messages -- Newest posted Tuesday, 12 June 2001, at 12:24 p.m.

Times up can I varnish next winter
Paul Pinder -- Wednesday, 6 June 2001, at 7:10 p.m.
8 messages -- Newest posted Friday, 8 June 2001, at 5:17 a.m.

Putz Walrus *Pic*
Paul Lund -- Thursday, 7 June 2001, at 8:19 a.m.
8 messages -- Newest posted Friday, 8 June 2001, at 6:03 p.m.

Paddle Shafts
Ben Van Enk -- Thursday, 7 June 2001, at 9:41 a.m.
5 messages -- Newest posted Friday, 8 June 2001, at 2:21 a.m.

Advice for spraying varnish needed
Andreas Albat -- Thursday, 7 June 2001, at 11:44 a.m.
5 messages -- Newest posted Friday, 8 June 2001, at 9:22 p.m.

Temporary skeg.
Bob -- Thursday, 7 June 2001, at 12:23 p.m.
13 messages -- Newest posted Monday, 11 June 2001, at 9:10 p.m.

Building order: fiberglass or strip deck first
Scott E. Davis -- Thursday, 7 June 2001, at 1:36 p.m.
2 messages -- Newest posted Thursday, 7 June 2001, at 4:01 p.m.

Old Fiberglass Frontiersman(Rudder/Skeg/None?))
Warner -- Thursday, 7 June 2001, at 3:02 p.m.
3 messages -- Newest posted Sunday, 10 June 2001, at 1:37 a.m.

Peel Ply tape sources
Doug Kuik -- Thursday, 7 June 2001, at 5:57 p.m.
1 message

2nd sealer coat or glass?
sage -- Thursday, 7 June 2001, at 10:45 p.m.
3 messages -- Newest posted Friday, 8 June 2001, at 6:49 a.m.

Neoprene hatch covers?
Robb -- Thursday, 7 June 2001, at 10:54 p.m.
8 messages -- Newest posted Monday, 11 June 2001, at 4:57 p.m.

Another one Down the skids *Pic*
!RUSS -- Thursday, 7 June 2001, at 11:33 p.m.
9 messages -- Newest posted Friday, 8 June 2001, at 9:54 p.m.

MAS or West System?
John Schwartz -- Friday, 8 June 2001, at 1:12 a.m.
10 messages -- Newest posted Tuesday, 12 June 2001, at 10:57 p.m.

kayak shape/design?
Mark -- Friday, 8 June 2001, at 4:15 a.m.
6 messages -- Newest posted Monday, 11 June 2001, at 12:47 p.m.

bulkheads
Dave Seales -- Friday, 8 June 2001, at 6:37 a.m.
1 message

Mixing epoxy brands AND varnish ??
Mark Sentell -- Friday, 8 June 2001, at 8:03 a.m.
2 messages -- Newest posted Saturday, 9 June 2001, at 3:55 p.m.

Almost there... *Pic*
Ross Leidy -- Friday, 8 June 2001, at 9:05 a.m.
20 messages -- Newest posted Monday, 11 June 2001, at 9:48 a.m.

Whitewater Stripper
Elliott -- Friday, 8 June 2001, at 9:07 a.m.
20 messages -- Newest posted Friday, 15 June 2001, at 3:01 p.m.

Handcrafted boat value theory
Jim Pace -- Friday, 8 June 2001, at 5:06 p.m.
3 messages -- Newest posted Monday, 11 June 2001, at 8:22 a.m.

First Strip
Dave Stecker -- Friday, 8 June 2001, at 8:57 p.m.
6 messages -- Newest posted Sunday, 10 June 2001, at 6:06 a.m.

Rub Rails
Art -- Friday, 8 June 2001, at 9:14 p.m.
10 messages -- Newest posted Wednesday, 13 June 2001, at 5:34 p.m.

Posting Pics
Ken Sutherland -- Saturday, 9 June 2001, at 3:48 a.m.
3 messages -- Newest posted Monday, 11 June 2001, at 2:43 a.m.

pouring bow &stern
brooks -- Saturday, 9 June 2001, at 7:56 a.m.
15 messages -- Newest posted Sunday, 17 June 2001, at 10:18 a.m.

Spring Run gets wet *Pic*
Liz Leedham -- Saturday, 9 June 2001, at 11:59 a.m.
10 messages -- Newest posted Monday, 11 June 2001, at 10:33 a.m.

Epoxy over gelcoat?
Berkeley C. -- Saturday, 9 June 2001, at 12:10 p.m.
3 messages -- Newest posted Thursday, 14 June 2001, at 1:24 p.m.

Did I make a mistake?
Robb -- Saturday, 9 June 2001, at 11:30 p.m.
2 messages -- Newest posted Thursday, 14 June 2001, at 1:17 p.m.

Re-varnishing/epoxying an 8 year old boat
Jon Allen -- Sunday, 10 June 2001, at 8:46 a.m.
2 messages -- Newest posted Sunday, 10 June 2001, at 7:49 p.m.

glue lines
Philip Miles -- Sunday, 10 June 2001, at 9:32 a.m.
4 messages -- Newest posted Monday, 11 June 2001, at 4:34 a.m.

Keyhole Cockpit
Ronnie -- Sunday, 10 June 2001, at 10:58 a.m.
2 messages -- Newest posted Tuesday, 12 June 2001, at 8:21 a.m.

Compass Idea
Mike Scarborough -- Sunday, 10 June 2001, at 12:11 p.m.
27 messages -- Newest posted Thursday, 14 June 2001, at 10:21 a.m.

First Timer - - THANKS !!
David Elles -- Monday, 11 June 2001, at 12:11 p.m.
3 messages -- Newest posted Tuesday, 12 June 2001, at 12:19 p.m.

Graphing Forms - Help
David Elles -- Monday, 11 June 2001, at 12:46 p.m.
8 messages -- Newest posted Tuesday, 12 June 2001, at 4:32 p.m.

My GB getting started...again!! *Pic*
James Neely -- Monday, 11 June 2001, at 5:25 p.m.
3 messages -- Newest posted Tuesday, 12 June 2001, at 7:00 a.m.

Ionizer/Varnish question
Steve -- Monday, 11 June 2001, at 5:44 p.m.
7 messages -- Newest posted Wednesday, 13 June 2001, at 6:21 a.m.

Long Lengths of Mahogany in Rhode Island !
John B. -- Monday, 11 June 2001, at 8:29 p.m.
1 message

Spare Change
Mike Nicholson -- Monday, 11 June 2001, at 9:35 p.m.
2 messages -- Newest posted Monday, 11 June 2001, at 10:30 p.m.

yahoo.geocities
Pete Rudie -- Monday, 11 June 2001, at 10:16 p.m.
7 messages -- Newest posted Tuesday, 12 June 2001, at 7:11 p.m.

North Star/ Shooting Star
Ken Katz -- Tuesday, 12 June 2001, at 12:29 a.m.
10 messages -- Newest posted Tuesday, 12 June 2001, at 9:12 p.m.

Baidarka Pic (I hope) *Pic*
Ken Sutherland -- Tuesday, 12 June 2001, at 1:56 a.m.
7 messages -- Newest posted Thursday, 14 June 2001, at 3:50 p.m.

UK suppliers for stripwood
Andy -- Tuesday, 12 June 2001, at 3:09 p.m.
2 messages -- Newest posted Tuesday, 12 June 2001, at 3:58 p.m.

Bulkhead Survey
Ted Henry -- Tuesday, 12 June 2001, at 6:07 p.m.
22 messages -- Newest posted Thursday, 14 June 2001, at 7:46 p.m.

cockpit size
Jeff Palmer -- Tuesday, 12 June 2001, at 10:36 p.m.
6 messages -- Newest posted Saturday, 16 June 2001, at 4:26 p.m.

Buoy floatation *Pic*
John Monfoe -- Wednesday, 13 June 2001, at 7:10 a.m.
9 messages -- Newest posted Sunday, 17 June 2001, at 5:58 a.m.

SOF - Greenland or Baidarka
Ken Finger -- Wednesday, 13 June 2001, at 7:40 a.m.
3 messages -- Newest posted Friday, 15 June 2001, at 7:28 a.m.

Glassing has begun....finally
Chris Menard -- Wednesday, 13 June 2001, at 8:07 a.m.
9 messages -- Newest posted Thursday, 14 June 2001, at 6:00 a.m.

Graphing the Diagonal - Guillemot
David Elles -- Wednesday, 13 June 2001, at 12:51 p.m.
5 messages -- Newest posted Monday, 18 June 2001, at 11:20 a.m.

Recommended reading - Understanding Wood Finishing
Brian Nystrom -- Wednesday, 13 June 2001, at 1:09 p.m.
2 messages -- Newest posted Wednesday, 13 June 2001, at 5:09 p.m.

putting a bulk head in???
Jim P -- Wednesday, 13 June 2001, at 5:53 p.m.
2 messages -- Newest posted Wednesday, 13 June 2001, at 9:03 p.m.

Where does one get construction instructions?
Kay -- Wednesday, 13 June 2001, at 7:49 p.m.
8 messages -- Newest posted Sunday, 17 June 2001, at 7:30 p.m.

Stitch and Glue Kayak
Ben Thomas -- Wednesday, 13 June 2001, at 8:38 p.m.
4 messages -- Newest posted Thursday, 14 June 2001, at 10:53 a.m.

epoxy health effects
Eric -- Thursday, 14 June 2001, at 12:34 a.m.
4 messages -- Newest posted Thursday, 14 June 2001, at 8:07 p.m.

Sprint boat plans?
Trin Yuthasastrakosol -- Thursday, 14 June 2001, at 12:40 a.m.
6 messages -- Newest posted Friday, 15 June 2001, at 8:06 a.m.

Skinning an X *Pic*
Bill Price -- Thursday, 14 June 2001, at 2:34 a.m.
16 messages -- Newest posted Monday, 18 June 2001, at 3:33 a.m.

Wood Types
David Elles -- Thursday, 14 June 2001, at 8:21 a.m.
8 messages -- Newest posted Friday, 15 June 2001, at 3:06 a.m.

varnish back in the can?
Jim Pace -- Thursday, 14 June 2001, at 9:04 a.m.
4 messages -- Newest posted Thursday, 14 June 2001, at 8:15 p.m.

Ionizer update
Steve -- Thursday, 14 June 2001, at 10:26 a.m.
8 messages -- Newest posted Friday, 15 June 2001, at 11:45 a.m.

Looking for stitch and glue, sea kayak plans
Allen Moretsky -- Thursday, 14 June 2001, at 11:27 a.m.
6 messages -- Newest posted Thursday, 21 June 2001, at 9:38 p.m.

Kite Power!
Marcus -- Thursday, 14 June 2001, at 12:54 p.m.
6 messages -- Newest posted Friday, 22 June 2001, at 7:57 a.m.

James GB progress
James Neely -- Thursday, 14 June 2001, at 2:30 p.m.
1 message

James GB progress *Pic*
James Neely -- Thursday, 14 June 2001, at 2:31 p.m.
1 message

One more pic *Pic*
James Neely -- Thursday, 14 June 2001, at 2:48 p.m.
2 messages -- Newest posted Thursday, 14 June 2001, at 3:30 p.m.

removing silicone from deck
Joy Hecht -- Thursday, 14 June 2001, at 3:27 p.m.
2 messages -- Newest posted Friday, 22 June 2001, at 11:30 a.m.

Canvas/plywood kayak
Alan Adams -- Thursday, 14 June 2001, at 4:31 p.m.
10 messages -- Newest posted Monday, 18 June 2001, at 12:03 a.m.

hatch vacuum
todd -- Thursday, 14 June 2001, at 5:55 p.m.
11 messages -- Newest posted Friday, 15 June 2001, at 2:57 p.m.

Hatch advice
David -- Thursday, 14 June 2001, at 6:40 p.m.
6 messages -- Newest posted Tuesday, 19 June 2001, at 7:07 a.m.

Insurance Question
Doug -- Friday, 15 June 2001, at 9:20 a.m.
7 messages -- Newest posted Wednesday, 20 June 2001, at 11:11 a.m.

Further Adventures of James GB
James Neely -- Friday, 15 June 2001, at 4:41 p.m.
4 messages -- Newest posted Sunday, 17 June 2001, at 2:48 p.m.

Fiberglass Strength and Skeg? *Pic*
peter -- Friday, 15 June 2001, at 4:48 p.m.
4 messages -- Newest posted Monday, 18 June 2001, at 9:28 a.m.

Varnishing my Coho
EdG -- Saturday, 16 June 2001, at 1:17 p.m.
6 messages -- Newest posted Monday, 18 June 2001, at 3:24 p.m.

Seeing the Light
Dave Seales -- Saturday, 16 June 2001, at 1:59 p.m.
3 messages -- Newest posted Saturday, 16 June 2001, at 5:54 p.m.

Meet at the beach!
Tom-Atlanta -- Saturday, 16 June 2001, at 7:22 p.m.
5 messages -- Newest posted Monday, 18 June 2001, at 6:29 p.m.

Blush
Mike Nicholson -- Saturday, 16 June 2001, at 10:38 p.m.
5 messages -- Newest posted Monday, 18 June 2001, at 10:50 a.m.

hot glue?
daren neufeld -- Sunday, 17 June 2001, at 2:15 p.m.
5 messages -- Newest posted Monday, 18 June 2001, at 8:36 p.m.

sheerclamp on the out side?
marc machado -- Sunday, 17 June 2001, at 9:10 p.m.
5 messages -- Newest posted Monday, 18 June 2001, at 6:09 p.m.

North Star Launch *Pic*
Steve -- Monday, 18 June 2001, at 8:44 a.m.
13 messages -- Newest posted Tuesday, 19 June 2001, at 11:56 a.m.

Outer Island Launch
Ross Leidy -- Monday, 18 June 2001, at 9:42 a.m.
26 messages -- Newest posted Thursday, 21 June 2001, at 8:18 p.m.

Hatch leash
EdG -- Monday, 18 June 2001, at 10:49 a.m.
8 messages -- Newest posted Tuesday, 19 June 2001, at 9:10 a.m.

SEDA Glider
mark -- Monday, 18 June 2001, at 11:01 a.m.
2 messages -- Newest posted Monday, 18 June 2001, at 11:17 a.m.

Hatch opening aid
Andreas Albat -- Monday, 18 June 2001, at 12:02 p.m.
13 messages -- Newest posted Thursday, 21 June 2001, at 1:28 p.m.

Varnishing the inside
Andreas Albat -- Monday, 18 June 2001, at 12:05 p.m.
8 messages -- Newest posted Wednesday, 20 June 2001, at 9:14 a.m.

Launch Day Reliance Tandem *Pic*
Scott Dollmeyer -- Monday, 18 June 2001, at 2:05 p.m.
9 messages -- Newest posted Friday, 22 June 2001, at 9:24 a.m.

WANTED: Kayak Sail w/outrigger
George A. Mandalou -- Monday, 18 June 2001, at 5:11 p.m.
2 messages -- Newest posted Tuesday, 19 June 2001, at 1:10 a.m.

Cutting out hatches
Ken Sutherland -- Monday, 18 June 2001, at 5:26 p.m.
5 messages -- Newest posted Thursday, 21 June 2001, at 10:06 p.m.

Raka Epoxy and Glass
Matt Thyer -- Monday, 18 June 2001, at 6:05 p.m.
9 messages -- Newest posted Wednesday, 20 June 2001, at 8:16 a.m.

Cockpit opening when glassing deck
Brion -- Monday, 18 June 2001, at 6:05 p.m.
2 messages -- Newest posted Monday, 18 June 2001, at 6:20 p.m.

Just Glassed Deck *Pic*
Joe Greenley -- Monday, 18 June 2001, at 9:10 p.m.
24 messages -- Newest posted Friday, 6 July 2001, at 7:30 p.m.

cockpit in woodenkayak
Brian White -- Tuesday, 19 June 2001, at 3:41 a.m.
2 messages -- Newest posted Tuesday, 19 June 2001, at 8:58 a.m.

Nick Shade - coaming award
Jay Babina -- Tuesday, 19 June 2001, at 10:11 a.m.
5 messages -- Newest posted Tuesday, 19 June 2001, at 1:36 p.m.

Broken Bird's Mouth Shaft
Shawn Baker -- Tuesday, 19 June 2001, at 11:45 a.m.
4 messages -- Newest posted Wednesday, 20 June 2001, at 2:29 p.m.

Kayak Catamaran
George F. Johnson -- Tuesday, 19 June 2001, at 12:51 p.m.
8 messages -- Newest posted Wednesday, 20 June 2001, at 6:19 p.m.

System 2000 Epoxy
Jim Kozel -- Tuesday, 19 June 2001, at 2:19 p.m.
2 messages -- Newest posted Tuesday, 19 June 2001, at 2:52 p.m.

What is a good satin varnish?
Robb -- Tuesday, 19 June 2001, at 4:31 p.m.
9 messages -- Newest posted Thursday, 21 June 2001, at 1:57 p.m.

Folbot Super recover hull
Danna Kewish -- Tuesday, 19 June 2001, at 5:01 p.m.
5 messages -- Newest posted Friday, 22 June 2001, at 9:47 p.m.

smoked glass kayak
Dave M -- Tuesday, 19 June 2001, at 7:27 p.m.
2 messages -- Newest posted Tuesday, 19 June 2001, at 10:23 p.m.

Escaping the heat
Greg Morse -- Wednesday, 20 June 2001, at 12:27 a.m.
12 messages -- Newest posted Saturday, 23 June 2001, at 2:01 a.m.

Sealline rudder pedal height
Marty Dion -- Wednesday, 20 June 2001, at 7:45 a.m.
3 messages -- Newest posted Thursday, 21 June 2001, at 9:44 a.m.

Drip rings for Inuit/Aleut wood paddles???
Patrick in Minnesota -- Wednesday, 20 June 2001, at 8:16 a.m.
9 messages -- Newest posted Thursday, 21 June 2001, at 9:44 a.m.

Varnish Questions
Steve -- Wednesday, 20 June 2001, at 10:58 a.m.
5 messages -- Newest posted Saturday, 23 June 2001, at 10:34 p.m.

Uncured Epoxy
Jim -- Wednesday, 20 June 2001, at 11:29 a.m.
7 messages -- Newest posted Monday, 25 June 2001, at 2:48 a.m.

varnish / urethane?
Mark Marchisano -- Wednesday, 20 June 2001, at 11:41 a.m.
9 messages -- Newest posted Monday, 25 June 2001, at 7:08 p.m.

Kid kayak plans
Brian McM -- Wednesday, 20 June 2001, at 7:31 p.m.
10 messages -- Newest posted Friday, 29 June 2001, at 11:53 a.m.

Sea Spirit Launched *Pic*
Bobby Curtis -- Thursday, 21 June 2001, at 8:12 a.m.
11 messages -- Newest posted Thursday, 21 June 2001, at 10:16 p.m.

Source for Plywood Physicals?
Craig Bumgarner -- Thursday, 21 June 2001, at 9:04 a.m.
4 messages -- Newest posted Friday, 22 June 2001, at 1:25 p.m.

pump dispenser
C. Cranfield - Thompson -- Thursday, 21 June 2001, at 2:57 p.m.
2 messages -- Newest posted Thursday, 21 June 2001, at 5:38 p.m.

Broken Bird's Mouth II *Pic*
Shawn Baker -- Thursday, 21 June 2001, at 3:40 p.m.
1 message

Hot weather effects
Mark Berger -- Thursday, 21 June 2001, at 3:56 p.m.
3 messages -- Newest posted Thursday, 21 June 2001, at 6:05 p.m.

Kayak seat
Bill Heuser -- Thursday, 21 June 2001, at 6:33 p.m.
3 messages -- Newest posted Friday, 22 June 2001, at 6:39 a.m.

transporting 20 foot strips
Brad Crowell -- Thursday, 21 June 2001, at 6:40 p.m.
15 messages -- Newest posted Tuesday, 26 June 2001, at 8:40 a.m.

Plywood Hull/ Stripped Deck Progress *Pic*
Tom Jablonski -- Friday, 22 June 2001, at 12:16 a.m.
7 messages -- Newest posted Saturday, 23 June 2001, at 11:10 p.m.

Splish Splash, giving my X a bath ... *Pic*
Bill Price -- Friday, 22 June 2001, at 2:17 a.m.
17 messages -- Newest posted Sunday, 24 June 2001, at 10:28 p.m.

Bluff Pt. Gathering
Steve L -- Friday, 22 June 2001, at 8:27 a.m.
6 messages -- Newest posted Friday, 22 June 2001, at 4:15 p.m.

Northstar
Marty Goulet -- Friday, 22 June 2001, at 10:19 a.m.
1 message

Epoxy questions
Pete Rudie -- Friday, 22 June 2001, at 12:13 p.m.
5 messages -- Newest posted Tuesday, 26 June 2001, at 11:11 a.m.

Adapting a 3-section Romany design to a wood kay
andrew -- Friday, 22 June 2001, at 2:18 p.m.
3 messages -- Newest posted Monday, 25 June 2001, at 6:04 a.m.

Spring Loaded Cam Cleats
Ron Weatherman -- Friday, 22 June 2001, at 3:09 p.m.
3 messages -- Newest posted Sunday, 24 June 2001, at 8:14 p.m.

saris roof racks
Kurt -- Friday, 22 June 2001, at 6:46 p.m.
6 messages -- Newest posted Sunday, 24 June 2001, at 10:14 a.m.

Varnish on top of paint - discoloration?
Val Wann -- Friday, 22 June 2001, at 7:51 p.m.
1 message

Progress Report
Rick Mitchell -- Friday, 22 June 2001, at 9:40 p.m.
4 messages -- Newest posted Monday, 25 June 2001, at 8:54 p.m.

epoxy question
Delaney -- Saturday, 23 June 2001, at 9:48 a.m.
5 messages -- Newest posted Thursday, 28 June 2001, at 7:00 p.m.

Unusual problem
Pete Rudie -- Saturday, 23 June 2001, at 10:01 a.m.
22 messages -- Newest posted Saturday, 30 June 2001, at 10:43 p.m.

Canvas covering?
Rick -- Saturday, 23 June 2001, at 11:41 a.m.
6 messages -- Newest posted Sunday, 24 June 2001, at 7:49 p.m.

Request for advice on stitch and glue kits
Gary -- Saturday, 23 June 2001, at 3:38 p.m.
7 messages -- Newest posted Tuesday, 26 June 2001, at 9:17 a.m.

Why use a greenland style paddle?
Steve L -- Saturday, 23 June 2001, at 4:11 p.m.
14 messages -- Newest posted Wednesday, 27 June 2001, at 6:16 a.m.

meet at the beach
Dave M -- Saturday, 23 June 2001, at 7:35 p.m.
10 messages -- Newest posted Tuesday, 26 June 2001, at 7:07 a.m.

single or double
Jim Almy -- Saturday, 23 June 2001, at 8:20 p.m.
7 messages -- Newest posted Tuesday, 26 June 2001, at 7:54 p.m.

Underdeck netting source?
Mitch Isoe -- Saturday, 23 June 2001, at 10:39 p.m.
10 messages -- Newest posted Tuesday, 26 June 2001, at 12:10 p.m.

deck rigging / foot braces
Tim -- Sunday, 24 June 2001, at 12:13 a.m.
1 message

Walrus " Double-Open" Progress *Pic*
Rehd -- Sunday, 24 June 2001, at 5:16 a.m.
11 messages -- Newest posted Tuesday, 26 June 2001, at 2:04 a.m.

Re: Thanks Rob, Jay & Nick
ScottH. -- Sunday, 24 June 2001, at 8:38 a.m.
1 message

Re: Thanks Rob, Nick and Jay
Scott Henshaw -- Sunday, 24 June 2001, at 8:40 a.m.
1 message

Thanks guys..... For a great saturday *NM*
Jim Distler -- Sunday, 24 June 2001, at 9:48 a.m.
1 message

GB launch day
Jim Pace -- Sunday, 24 June 2001, at 11:31 a.m.
14 messages -- Newest posted Thursday, 28 June 2001, at 3:51 a.m.

Guillemot "L" Launch *Pic*
Dave Seales -- Sunday, 24 June 2001, at 11:40 p.m.
29 messages -- Newest posted Thursday, 28 June 2001, at 8:30 p.m.

Walrus gunwale height...
Kirk -- Sunday, 24 June 2001, at 11:56 p.m.
9 messages -- Newest posted Tuesday, 26 June 2001, at 10:43 a.m.

delurking
RobP -- Monday, 25 June 2001, at 9:39 a.m.
29 messages -- Newest posted Sunday, 1 July 2001, at 3:52 a.m.

Re: Weights
Shawn Baker -- Monday, 25 June 2001, at 3:44 p.m.
1 message

The last coat - help
Bill Dumont -- Monday, 25 June 2001, at 6:59 p.m.
5 messages -- Newest posted Tuesday, 26 June 2001, at 12:31 p.m.

wet wood: the soggy strip dilemma
Tom Murphy -- Monday, 25 June 2001, at 8:00 p.m.
5 messages -- Newest posted Tuesday, 26 June 2001, at 1:20 p.m.

Request for advice on Greenland paddle wood
Gary -- Monday, 25 June 2001, at 9:26 p.m.
9 messages -- Newest posted Wednesday, 27 June 2001, at 12:43 p.m.

Bevelling Forms
Brad -- Monday, 25 June 2001, at 9:29 p.m.
5 messages -- Newest posted Tuesday, 26 June 2001, at 8:57 a.m.

Anyone want to buy my strips?
Allison -- Monday, 25 June 2001, at 10:51 p.m.
1 message

Anyone want to buy my strips?
Allison -- Monday, 25 June 2001, at 10:53 p.m.
5 messages -- Newest posted Tuesday, 26 June 2001, at 10:36 a.m.

Free Help to keep this sport healthy!
Viktor -- Monday, 25 June 2001, at 11:07 p.m.
2 messages -- Newest posted Tuesday, 26 June 2001, at 11:00 a.m.

Pasting Patterns Onto Forms
Brad -- Tuesday, 26 June 2001, at 1:41 a.m.
3 messages -- Newest posted Monday, 2 July 2001, at 9:26 a.m.

A poor-man's roof rack
Mark -- Tuesday, 26 June 2001, at 10:21 a.m.
10 messages -- Newest posted Wednesday, 27 June 2001, at 10:46 a.m.

The Ultimate Design -- a Wish List?
andrew -- Tuesday, 26 June 2001, at 10:23 a.m.
9 messages -- Newest posted Wednesday, 27 June 2001, at 4:39 p.m.

Insurance revisited
Doug -- Tuesday, 26 June 2001, at 10:32 a.m.
2 messages -- Newest posted Thursday, 28 June 2001, at 1:14 p.m.

wooden kayak
b. polansky -- Tuesday, 26 June 2001, at 1:34 p.m.
4 messages -- Newest posted Wednesday, 27 June 2001, at 1:08 a.m.

A Funny thing happened on my way to surface
!RUSS -- Tuesday, 26 June 2001, at 3:07 p.m.
8 messages -- Newest posted Wednesday, 27 June 2001, at 5:55 p.m.

Eliminating air bubbles
Dan Nelson -- Tuesday, 26 June 2001, at 4:17 p.m.
10 messages -- Newest posted Friday, 29 June 2001, at 12:43 p.m.

bungee cord source
Dave M artin -- Tuesday, 26 June 2001, at 9:36 p.m.
2 messages -- Newest posted Friday, 29 June 2001, at 10:55 p.m.

Glassing a Guillemot - How Much Glass?
Dave H -- Tuesday, 26 June 2001, at 11:19 p.m.
3 messages -- Newest posted Thursday, 28 June 2001, at 7:14 p.m.

Best Jig saw for the job
Foster Nuffer -- Tuesday, 26 June 2001, at 11:24 p.m.
41 messages -- Newest posted Wednesday, 11 July 2001, at 5:51 a.m.

Woe is me.
John Monfoe -- Wednesday, 27 June 2001, at 7:03 a.m.
7 messages -- Newest posted Thursday, 28 June 2001, at 5:40 a.m.

broken joint question
kirk -- Wednesday, 27 June 2001, at 1:08 p.m.
10 messages -- Newest posted Thursday, 28 June 2001, at 3:22 p.m.

When varnishing a paddle...
Brian Nystrom -- Wednesday, 27 June 2001, at 1:10 p.m.
3 messages -- Newest posted Wednesday, 27 June 2001, at 2:22 p.m.

Re: You've taken the first steps.
Roger Nuffer -- Wednesday, 27 June 2001, at 4:44 p.m.
1 message

A little late, but......
Tom-Atlanta -- Wednesday, 27 June 2001, at 5:05 p.m.
1 message

Which procedure
Chuck Birch -- Wednesday, 27 June 2001, at 11:10 p.m.
8 messages -- Newest posted Friday, 29 June 2001, at 12:05 p.m.

CLC vs Pygmy...
Dave P. -- Thursday, 28 June 2001, at 12:16 a.m.
29 messages -- Newest posted Thursday, 5 July 2001, at 7:27 p.m.

Leidy hatch hold-downs
Elliott -- Thursday, 28 June 2001, at 7:43 a.m.
11 messages -- Newest posted Sunday, 1 July 2001, at 11:44 p.m.

glass cloth unravelling
mark stevens -- Thursday, 28 June 2001, at 1:12 p.m.
12 messages -- Newest posted Friday, 29 June 2001, at 5:33 p.m.

Roof Rack (Slightly Off-Topic)
Greg Hicks -- Thursday, 28 June 2001, at 2:38 p.m.
5 messages -- Newest posted Monday, 2 July 2001, at 1:33 p.m.

Launch *Pic*
Ross Sieber -- Thursday, 28 June 2001, at 2:47 p.m.
6 messages -- Newest posted Friday, 29 June 2001, at 5:30 a.m.

Fiberglass cloth all stressed out
Dale Frolander -- Thursday, 28 June 2001, at 3:54 p.m.
10 messages -- Newest posted Friday, 29 June 2001, at 9:58 p.m.

Helicopter-tape
Bill Vance -- Thursday, 28 June 2001, at 4:06 p.m.
6 messages -- Newest posted Monday, 2 July 2001, at 8:24 a.m.

Internal Server Error...am I the only one?
Ben Staley -- Thursday, 28 June 2001, at 5:41 p.m.
9 messages -- Newest posted Friday, 29 June 2001, at 10:57 a.m.

Another PhotoPoint Change O.T.
Rehd -- Thursday, 28 June 2001, at 11:00 p.m.
20 messages -- Newest posted Tuesday, 3 July 2001, at 7:31 p.m.

Re: No staple method
Chuck Birch -- Friday, 29 June 2001, at 12:37 a.m.
1 message

Re: No staple method
!RUSS -- Friday, 29 June 2001, at 8:23 a.m.
1 message

Re: No staple method *Pic*
Mitch Isoe -- Friday, 29 June 2001, at 9:29 a.m.
1 message

Re: No staple method
Nick Schade - Guillemot Kayaks -- Friday, 29 June 2001, at 9:37 a.m.
2 messages -- Newest posted Friday, 29 June 2001, at 11:35 a.m.

Re: No staple method
daren neufeld -- Friday, 29 June 2001, at 9:57 a.m.
1 message

Re: No staple method
daren neufeld -- Friday, 29 June 2001, at 9:59 a.m.
10 messages -- Newest posted Thursday, 5 July 2001, at 8:32 p.m.

Keel Rocker?
Craig Bumgarner -- Friday, 29 June 2001, at 11:29 a.m.
5 messages -- Newest posted Friday, 29 June 2001, at 1:28 p.m.

pygmy plans
Tom-Atlanta -- Friday, 29 June 2001, at 6:54 p.m.
4 messages -- Newest posted Tuesday, 3 July 2001, at 4:46 p.m.

filling the weave
mark stevens -- Friday, 29 June 2001, at 7:29 p.m.
3 messages -- Newest posted Saturday, 30 June 2001, at 12:52 a.m.

Surfyak?
Paul Lund -- Friday, 29 June 2001, at 8:29 p.m.
3 messages -- Newest posted Friday, 29 June 2001, at 9:24 p.m.

Feature Strip Progress *Pic*
Chip Sandresky -- Saturday, 30 June 2001, at 1:42 a.m.
2 messages -- Newest posted Saturday, 30 June 2001, at 2:18 p.m.

response to LeeG
mark stevens -- Saturday, 30 June 2001, at 10:18 a.m.
8 messages -- Newest posted Sunday, 1 July 2001, at 11:33 a.m.

Local Canvas Covering
Rick -- Saturday, 30 June 2001, at 6:12 p.m.
8 messages -- Newest posted Tuesday, 3 July 2001, at 12:53 p.m.

taking hull lines
garland reese -- Saturday, 30 June 2001, at 10:04 p.m.
2 messages -- Newest posted Tuesday, 3 July 2001, at 2:13 p.m.

Sailing Rig Instructions
John Monfoe -- Sunday, 1 July 2001, at 4:13 a.m.
1 message

Varnish???
John Monfoe -- Sunday, 1 July 2001, at 5:22 a.m.
8 messages -- Newest posted Tuesday, 3 July 2001, at 5:19 a.m.

Slow Varnish
Paul Johnson -- Sunday, 1 July 2001, at 10:48 a.m.
7 messages -- Newest posted Wednesday, 4 July 2001, at 6:02 p.m.

Kayaking and shoulder problem
Bailey -- Sunday, 1 July 2001, at 1:00 p.m.
7 messages -- Newest posted Sunday, 8 July 2001, at 3:35 p.m.

Guillemot ES makes front page!
Larry C. -- Sunday, 1 July 2001, at 3:53 p.m.
3 messages -- Newest posted Monday, 2 July 2001, at 6:23 p.m.

Red Cedar weight variation
mark -- Sunday, 1 July 2001, at 5:04 p.m.
4 messages -- Newest posted Monday, 2 July 2001, at 5:42 p.m.

Merganser 17W Launch *Pic*
Paul Johnson -- Sunday, 1 July 2001, at 7:38 p.m.
4 messages -- Newest posted Wednesday, 11 July 2001, at 12:46 a.m.

Merganser 17W Launch *Pic*
Paul Johnson -- Sunday, 1 July 2001, at 7:41 p.m.
15 messages -- Newest posted Monday, 2 July 2001, at 6:31 p.m.

Combing help needed
Rick Mitchell -- Sunday, 1 July 2001, at 9:12 p.m.
5 messages -- Newest posted Tuesday, 3 July 2001, at 4:43 p.m.

Arctic Tern completed
Jim Kozel -- Monday, 2 July 2001, at 1:37 a.m.
1 message

Arctic Tern completed
Jim Kozel -- Monday, 2 July 2001, at 1:41 a.m.
7 messages -- Newest posted Tuesday, 3 July 2001, at 11:37 a.m.

Bending Plywood for Cockpit Coaming
Rehd -- Monday, 2 July 2001, at 3:03 a.m.
2 messages -- Newest posted Monday, 2 July 2001, at 11:06 a.m.

scarf?
Forrest -- Monday, 2 July 2001, at 8:47 a.m.
5 messages -- Newest posted Monday, 2 July 2001, at 8:03 p.m.

Kayak Skin Selection
Ken Moran -- Monday, 2 July 2001, at 9:39 a.m.
13 messages -- Newest posted Thursday, 5 July 2001, at 2:42 p.m.

wood kayak on billboard in NY
peter czerpak -- Monday, 2 July 2001, at 1:42 p.m.
6 messages -- Newest posted Tuesday, 3 July 2001, at 11:45 a.m.

glass layup
konstantin -- Monday, 2 July 2001, at 2:01 p.m.
7 messages -- Newest posted Thursday, 5 July 2001, at 11:24 a.m.

Another Combing Question
Rick Mitchell -- Monday, 2 July 2001, at 4:44 p.m.
5 messages -- Newest posted Tuesday, 3 July 2001, at 3:00 p.m.

Re: What is the world record?
Don Beale -- Monday, 2 July 2001, at 5:51 p.m.
1 message

Re: What is the world record?
Don Beale -- Monday, 2 July 2001, at 5:53 p.m.
36 messages -- Newest posted Friday, 6 July 2001, at 5:43 p.m.

Panache - Launch *Pic*
Bill Dumont -- Monday, 2 July 2001, at 11:02 p.m.
11 messages -- Newest posted Tuesday, 3 July 2001, at 9:14 p.m.

Coating for nylon skin
Ken Moran -- Monday, 2 July 2001, at 11:27 p.m.
9 messages -- Newest posted Wednesday, 4 July 2001, at 12:51 a.m.

I need to be straightened out.
Dale Frolander -- Tuesday, 3 July 2001, at 12:45 a.m.
16 messages -- Newest posted Thursday, 5 July 2001, at 2:36 p.m.

Another wood question
Tom-Atlanta -- Tuesday, 3 July 2001, at 1:56 a.m.
3 messages -- Newest posted Tuesday, 3 July 2001, at 7:45 a.m.

Tyne Folder : Sail Rigging etc.?
Keith -- Tuesday, 3 July 2001, at 5:01 a.m.
1 message

This is a PhotoPoint test. *Pic*
John Monfoe -- Tuesday, 3 July 2001, at 6:44 a.m.
5 messages -- Newest posted Tuesday, 3 July 2001, at 2:44 p.m.

Lengthening a Mill Creek 16.5
Ray -- Tuesday, 3 July 2001, at 8:12 a.m.
5 messages -- Newest posted Saturday, 7 July 2001, at 11:11 p.m.

Trade white cedar for red cedar
Brad Crowell -- Tuesday, 3 July 2001, at 8:48 a.m.
5 messages -- Newest posted Saturday, 7 July 2001, at 11:02 p.m.

Knee brace question for Pygmy boat owners *Pic*
Mark Berger -- Tuesday, 3 July 2001, at 7:38 p.m.
8 messages -- Newest posted Saturday, 7 July 2001, at 10:59 p.m.

Fiberglass Seaming Question
Rick Mitchell -- Tuesday, 3 July 2001, at 7:56 p.m.
4 messages -- Newest posted Tuesday, 3 July 2001, at 11:41 p.m.

epoxy filler
Chris Luneski -- Tuesday, 3 July 2001, at 9:57 p.m.
8 messages -- Newest posted Thursday, 5 July 2001, at 4:35 a.m.

Testing with "PolaroidDigital.com" pictures *Pic*
John Monfoe -- Wednesday, 4 July 2001, at 5:03 a.m.
1 message

one piece keel
stephen -- Wednesday, 4 July 2001, at 7:51 a.m.
2 messages -- Newest posted Thursday, 5 July 2001, at 1:33 p.m.

happy independence day
daren neufeld -- Wednesday, 4 July 2001, at 8:48 a.m.
2 messages -- Newest posted Wednesday, 4 July 2001, at 9:39 a.m.

Thoughts from the Rock Garden
!RUSS -- Wednesday, 4 July 2001, at 9:16 a.m.
1 message

Stich & Glue Canoe
Randy Powell -- Wednesday, 4 July 2001, at 2:45 p.m.
13 messages -- Newest posted Thursday, 5 July 2001, at 12:08 p.m.

INFO ON MY OLD 2MAN SAILIING KAYAK
ROB FISHER -- Wednesday, 4 July 2001, at 5:01 p.m.
2 messages -- Newest posted Thursday, 5 July 2001, at 1:21 p.m.

Canadian Canoe and Kayak Festival
Simon Baillie -- Wednesday, 4 July 2001, at 9:07 p.m.
1 message

broke a cheek plate for the 2nd time
Ben Staley -- Thursday, 5 July 2001, at 11:31 a.m.
19 messages -- Newest posted Tuesday, 10 July 2001, at 7:11 p.m.

Poplar
Jim Carroll -- Thursday, 5 July 2001, at 12:59 p.m.
8 messages -- Newest posted Saturday, 7 July 2001, at 10:34 p.m.

Damage to interior after tipping or rolling
Mr.Bucket -- Thursday, 5 July 2001, at 3:33 p.m.
28 messages -- Newest posted Tuesday, 10 July 2001, at 10:13 p.m.

Guillemot double shear strip length
Gary Rensberger -- Thursday, 5 July 2001, at 6:58 p.m.
2 messages -- Newest posted Thursday, 5 July 2001, at 10:45 p.m.

scarf jig ?
Clint -- Thursday, 5 July 2001, at 7:16 p.m.
5 messages -- Newest posted Friday, 6 July 2001, at 12:42 p.m.

Sanding/varnish question
Rod -- Thursday, 5 July 2001, at 11:54 p.m.
6 messages -- Newest posted Saturday, 7 July 2001, at 5:20 a.m.

Tool Question (slightly off topic)
John Pane -- Friday, 6 July 2001, at 7:58 a.m.
2 messages -- Newest posted Friday, 6 July 2001, at 2:04 p.m.

Form-a-gasket release agent?
Liz Leedham -- Friday, 6 July 2001, at 9:20 a.m.
10 messages -- Newest posted Friday, 13 July 2001, at 12:38 p.m.

Georgian Bay Launch *Pic*
Jim Martin -- Friday, 6 July 2001, at 10:25 a.m.
8 messages -- Newest posted Monday, 9 July 2001, at 11:13 a.m.

Guillemot Accessories
Travis -- Friday, 6 July 2001, at 12:33 p.m.
2 messages -- Newest posted Friday, 6 July 2001, at 3:40 p.m.

Helpful reading
Dave P. -- Friday, 6 July 2001, at 2:21 p.m.
5 messages -- Newest posted Tuesday, 10 July 2001, at 12:48 a.m.

Never built a Kayak, but I would like too
Matthew -- Saturday, 7 July 2001, at 3:48 a.m.
6 messages -- Newest posted Monday, 9 July 2001, at 11:12 a.m.

folding kayak plans
greg sargent -- Saturday, 7 July 2001, at 11:50 a.m.
2 messages -- Newest posted Saturday, 7 July 2001, at 5:00 p.m.

folding kayak plans
greg sargent -- Saturday, 7 July 2001, at 11:52 a.m.
3 messages -- Newest posted Sunday, 8 July 2001, at 12:43 a.m.

How do I get started?
Patrick Criswell -- Saturday, 7 July 2001, at 12:55 p.m.
3 messages -- Newest posted Monday, 9 July 2001, at 2:26 a.m.

Do they break?
Dave Seales -- Sunday, 8 July 2001, at 12:39 a.m.
3 messages -- Newest posted Sunday, 8 July 2001, at 12:08 p.m.

chapleau crown game preserve
brett the hitman hart -- Sunday, 8 July 2001, at 3:54 p.m.
10 messages -- Newest posted Friday, 13 July 2001, at 6:44 a.m.

Kayak classroom project
Brent Curtis -- Sunday, 8 July 2001, at 3:54 p.m.
8 messages -- Newest posted Thursday, 12 July 2001, at 11:46 a.m.

Kayak carrier
Kathy -- Sunday, 8 July 2001, at 5:26 p.m.
13 messages -- Newest posted Sunday, 15 July 2001, at 10:20 p.m.

Making Big BUCKS Legally
Anonymous_not_so_much -- Monday, 9 July 2001, at 1:11 a.m.
4 messages -- Newest posted Monday, 9 July 2001, at 12:39 p.m.

thanks guys for the help
Kathy -- Monday, 9 July 2001, at 4:36 a.m.
1 message

Hiding White Spots & Mistakes.
John Monfoe -- Monday, 9 July 2001, at 5:52 a.m.
3 messages -- Newest posted Tuesday, 10 July 2001, at 5:37 a.m.

Fiberglass help! Nick or ?
Scott E. Davis -- Monday, 9 July 2001, at 8:45 a.m.
4 messages -- Newest posted Tuesday, 10 July 2001, at 1:28 p.m.

TP to remove excess epoxy
Jim -- Monday, 9 July 2001, at 12:21 p.m.
2 messages -- Newest posted Wednesday, 11 July 2001, at 12:51 p.m.

PU Paint for a wood Sprint K1 - STRUER
Fred Mechini -- Monday, 9 July 2001, at 1:30 p.m.
2 messages -- Newest posted Tuesday, 10 July 2001, at 10:19 a.m.

World record - which day? 1-dayers please vote.
Dale Frolander -- Monday, 9 July 2001, at 2:18 p.m.
9 messages -- Newest posted Tuesday, 10 July 2001, at 3:56 p.m.

Stapleless Construction....Yikes! (long)
Will Dickinson -- Monday, 9 July 2001, at 4:22 p.m.
15 messages -- Newest posted Wednesday, 11 July 2001, at 9:48 a.m.

Storm Damaged Frame... ugh!!!
Malcolm Schweizer -- Monday, 9 July 2001, at 6:49 p.m.
10 messages -- Newest posted Wednesday, 11 July 2001, at 7:54 p.m.

Kid Kayak Needed
Steve Phillips -- Tuesday, 10 July 2001, at 12:10 a.m.
12 messages -- Newest posted Wednesday, 11 July 2001, at 1:56 p.m.

Need a seat for a COHO
Wayne G. -- Tuesday, 10 July 2001, at 1:04 a.m.
6 messages -- Newest posted Wednesday, 11 July 2001, at 12:45 p.m.

Mold for wiping coaming. *Pic*
John Monfoe -- Tuesday, 10 July 2001, at 6:12 a.m.
18 messages -- Newest posted Saturday, 14 July 2001, at 7:19 a.m.

Hatch leash *Pic*
Steve -- Tuesday, 10 July 2001, at 7:43 a.m.
2 messages -- Newest posted Tuesday, 10 July 2001, at 9:35 a.m.

Brass Carry Rings?
Rick Mitchell -- Tuesday, 10 July 2001, at 10:12 a.m.
3 messages -- Newest posted Tuesday, 10 July 2001, at 4:55 p.m.

Ride Sharing to R2K1 from SOCAL
Scott Dollmeyer -- Tuesday, 10 July 2001, at 4:34 p.m.
1 message

Chesapeake Hull Strength
Mr.Bucket -- Tuesday, 10 July 2001, at 10:18 p.m.
19 messages -- Newest posted Monday, 16 July 2001, at 9:45 a.m.

Help with decision
Mr.Bucket -- Wednesday, 11 July 2001, at 4:49 p.m.
34 messages -- Newest posted Wednesday, 18 July 2001, at 1:58 a.m.

Epoxy/firberglass$
Clint -- Wednesday, 11 July 2001, at 8:55 p.m.
4 messages -- Newest posted Thursday, 12 July 2001, at 7:46 a.m.

Shock cord
erik -- Wednesday, 11 July 2001, at 9:32 p.m.
1 message

s&g questions
mark -- Wednesday, 11 July 2001, at 10:17 p.m.
14 messages -- Newest posted Friday, 13 July 2001, at 8:34 p.m.

System 3 Spar Varnish
Severne -- Thursday, 12 July 2001, at 10:47 a.m.
1 message

Materials, Please Help!
Travis -- Thursday, 12 July 2001, at 12:30 p.m.
14 messages -- Newest posted Wednesday, 18 July 2001, at 2:45 a.m.

Strip Adhesive
Jim Kozel -- Thursday, 12 July 2001, at 3:26 p.m.
5 messages -- Newest posted Friday, 13 July 2001, at 5:03 a.m.

Valspar varnish
Joe S. -- Thursday, 12 July 2001, at 10:43 p.m.
1 message

Epoxy over Paint
Paul Johnson -- Thursday, 12 July 2001, at 11:49 p.m.
2 messages -- Newest posted Friday, 13 July 2001, at 12:24 a.m.

Crikey –I think I’m going to build a strip-built k
andrew -- Friday, 13 July 2001, at 10:04 a.m.
13 messages -- Newest posted Tuesday, 17 July 2001, at 5:46 p.m.

Colouring wood strips
JJ -- Friday, 13 July 2001, at 2:02 p.m.
11 messages -- Newest posted Tuesday, 17 July 2001, at 3:38 a.m.

Fiber reiforcement material spec's
Doug K -- Friday, 13 July 2001, at 2:45 p.m.
6 messages -- Newest posted Saturday, 14 July 2001, at 12:14 p.m.

something to keep you busy while in dry dock
Malcolm Schweizer -- Friday, 13 July 2001, at 8:41 p.m.
3 messages -- Newest posted Monday, 16 July 2001, at 10:42 a.m.

Flares
Don Beale -- Friday, 13 July 2001, at 10:34 p.m.
25 messages -- Newest posted Tuesday, 17 July 2001, at 1:13 p.m.

Adding color layer between coats of spar varnish
Ken Moran -- Friday, 13 July 2001, at 10:48 p.m.
2 messages -- Newest posted Monday, 16 July 2001, at 8:47 a.m.

Buffalo HydroFest Details
Ron Drynan -- Saturday, 14 July 2001, at 12:41 p.m.
5 messages -- Newest posted Tuesday, 17 July 2001, at 2:38 p.m.

Hatch Placement on Guillemot Expedition
Joe Wuts -- Saturday, 14 July 2001, at 3:30 p.m.
2 messages -- Newest posted Saturday, 14 July 2001, at 5:25 p.m.

water based varnish
Joe S. -- Saturday, 14 July 2001, at 4:20 p.m.
2 messages -- Newest posted Saturday, 14 July 2001, at 8:07 p.m.

I took the Albatross out for another spin
Dale Frolander -- Sunday, 15 July 2001, at 2:21 a.m.
1 message

Building my coaming *Pic*
John Monfoe -- Sunday, 15 July 2001, at 4:11 a.m.
1 message

Building my coaming *Pic*
John Monfoe -- Sunday, 15 July 2001, at 4:20 a.m.
5 messages -- Newest posted Tuesday, 17 July 2001, at 11:13 a.m.

Touching Up Finish on Old Wood Kayak
Harvey C. Farr Jr. -- Sunday, 15 July 2001, at 8:37 a.m.
7 messages -- Newest posted Tuesday, 17 July 2001, at 11:09 p.m.

Why Hatches?
Rene Braun -- Sunday, 15 July 2001, at 11:11 a.m.
18 messages -- Newest posted Tuesday, 17 July 2001, at 2:36 p.m.

Central Oregon paddling *Pic*
Jerry Siegel -- Sunday, 15 July 2001, at 1:35 p.m.
13 messages -- Newest posted Tuesday, 17 July 2001, at 4:23 p.m.

Does anyone know of a Kempock kayak ?
willy -- Sunday, 15 July 2001, at 8:33 p.m.
4 messages -- Newest posted Monday, 16 July 2001, at 11:35 a.m.

PHOTOPPOINT.COM Down Hope it's up soon... *NM*
Roger Nuffer -- Sunday, 15 July 2001, at 9:29 p.m.
1 message

Modified Great Auk...just about done *Pic*
Charlie Lesh -- Monday, 16 July 2001, at 12:12 a.m.
3 messages -- Newest posted Monday, 16 July 2001, at 6:10 p.m.

CLC plans
Tom-Atlanta -- Monday, 16 July 2001, at 12:59 a.m.
8 messages -- Newest posted Tuesday, 17 July 2001, at 2:10 a.m.

Glueing Rub Strip
Paul Hoffman -- Monday, 16 July 2001, at 4:13 a.m.
1 message

Laugh ing Loon Shooting Star
Susan -- Monday, 16 July 2001, at 6:23 a.m.
28 messages -- Newest posted Tuesday, 17 July 2001, at 9:33 p.m.

Spray Skirt Address?
John Monfoe -- Monday, 16 July 2001, at 6:46 a.m.
3 messages -- Newest posted Tuesday, 17 July 2001, at 2:43 a.m.

Duct Tape Adhesive Removal?
Steve Lein -- Monday, 16 July 2001, at 7:51 a.m.
7 messages -- Newest posted Tuesday, 17 July 2001, at 3:21 a.m.

Restoration of old fiberglass ww kayak
Pete -- Monday, 16 July 2001, at 9:51 a.m.
3 messages -- Newest posted Monday, 16 July 2001, at 2:39 p.m.

Re: Mr. Roberts
Nick Schade - Guillemot Kayaks -- Monday, 16 July 2001, at 12:00 p.m.
9 messages -- Newest posted Tuesday, 17 July 2001, at 7:40 a.m.

Glueing Rub Strips
Paul Hoffman -- Monday, 16 July 2001, at 2:01 p.m.
3 messages -- Newest posted Tuesday, 17 July 2001, at 1:16 a.m.

Canvas covering
marianna sturdevant -- Monday, 16 July 2001, at 8:54 p.m.
2 messages -- Newest posted Monday, 16 July 2001, at 10:17 p.m.

Shearwater Baidarka
Fred Williams -- Tuesday, 17 July 2001, at 1:51 a.m.
12 messages -- Newest posted Wednesday, 18 July 2001, at 12:41 a.m.

Woodenboat Show
Robert Forsell -- Tuesday, 17 July 2001, at 8:11 a.m.
3 messages -- Newest posted Tuesday, 17 July 2001, at 12:57 p.m.

canvas kayak
Clint -- Tuesday, 17 July 2001, at 8:20 a.m.
4 messages -- Newest posted Wednesday, 18 July 2001, at 2:23 a.m.

S&G 101 Questions
Craig Bumgarner -- Tuesday, 17 July 2001, at 8:45 a.m.
2 messages -- Newest posted Tuesday, 17 July 2001, at 12:45 p.m.

Where are pics of the "Meet at the Beach?"
Chuck Birch -- Tuesday, 17 July 2001, at 8:49 a.m.
1 message

cove and beaad along sheerline?
JJ -- Tuesday, 17 July 2001, at 12:54 p.m.
1 message

western red cedar
Terry McKenzie -- Tuesday, 17 July 2001, at 1:10 p.m.
2 messages -- Newest posted Tuesday, 17 July 2001, at 4:06 p.m.

New Glue
Severne -- Tuesday, 17 July 2001, at 1:32 p.m.
1 message

Flush hatch spacers
Greg Jones -- Tuesday, 17 July 2001, at 2:02 p.m.
2 messages -- Newest posted Tuesday, 17 July 2001, at 3:40 p.m.

Glue Removal ... When Should I Do It?
Kenny Too Slow -- Tuesday, 17 July 2001, at 10:46 p.m.
3 messages -- Newest posted Wednesday, 18 July 2001, at 12:19 a.m.

test flight *Pic*
Chris Luneski -- Wednesday, 18 July 2001, at 1:36 a.m.
3 messages -- Newest posted Wednesday, 18 July 2001, at 2:21 a.m.