This archive is sponsored by Guillemot Kayaks . Go to the active forum to post new messages.

[ View Thread ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

KBBS Archive 30,000

Re: Fiberglass cloth and epoxy

Posted By: peter czerpak
Date: Tuesday, 20 June 2000, at 10:44 a.m.

In Response To: Fiberglass cloth and epoxy (Ronnie)

: What is the best width fiberglass cloth to use on the Guillemot 17? How many
: yards minimum? Will the one gal. kit (127 resin, 606 or 350 hardner) from
: Raka be enough to do the kayak?

I think the 1 gallon kit will not be enough - you want atleast 1.5 gallons total. It is especially tough to use the minimum amount of epoxy on your first kayak since you are learning how to apply glass etc.

The guillimot 17 requires about 17+17 ft for the hull and the same for the deck. making about 70 feet total. you may be able to get enough cloth out of very wide glass to only require about half this though. you still need cloth for reinforcement and coaming etc. as well.

get Nicks book as it outlines all the above. his plans also outline it as well. they have all the material requirements needed. the book covers all construction techniques that will help out duiring construction. pictures are good in it as well.

good luck building,

pete czerpak albany, ny

Messages In This Thread

Fiberglass cloth and epoxy
Ronnie -- Tuesday, 20 June 2000, at 9:39 a.m.
Re: Fiberglass cloth and epoxy
peter czerpak -- Tuesday, 20 June 2000, at 10:44 a.m.
Re: Fiberglass cloth and epoxy
Kent LeBoutillier -- Tuesday, 20 June 2000, at 11:39 a.m.
Re: Fiberglass cloth and epoxy
Tony -- Tuesday, 20 June 2000, at 3:51 p.m.
Re: Fiberglass cloth and epoxy
Kent LeBoutillier -- Wednesday, 21 June 2000, at 6:03 a.m.

[ View Thread ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

KBBS Archive 30,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.

 Guillemot | SEE Kayak Directory | Kayak Forum

The Kayak Forum is Sponsored By

Guillemot Kayaks

Guillemot Kayaks