KBBS Archive 20,000

Re: Final strips

Posted By: Dale Frolander
Date: Wednesday, 19 January 2000, at 9:30 p.m.

> Next time avoid the problem. It is hard to tell from your pictures but it
> appears your problem arose because you filled in the center of the deck
> before the edges. Had you workd from the edges toward the center and
> toward the covkpits you might not of had the problem.

I did the walnut first as I wanted the curves to be defined around and through the cockpits. Then I did a strip of pine just above the red cedar and filled in the cedar area. Finally I did the pine, alternating from upper strips to lower strips. I wanted to define the outsides of the pine stripe and let the width of the pine stripe vary to match.

The Right side worked great since I had access to both sides, and is all complete (those are old pictures). The left side is working great so far and I am almost done. It's just the few strips I have left in the end that are a pain because of access

Dale.

Messages In This Thread

Re: Final strips
Dale Frolander -- Wednesday, 19 January 2000, at 9:30 p.m.

KBBS Archive 20,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.