KBBS Archive 20,000

Re: Final strips

Posted By: Ross Leidy
Date: Tuesday, 18 January 2000, at 10:17 a.m.

In Response To: Re: Final strips (Dale Frolander)

> That's mainly what I'm concerned about is being able to get ahold of it to
> pull it back out as I'm trying to test fit it. I've thought about glueing
> strips perpendicular to the strip and then trimming them off afterward.

Once one side of the strip is fitted, you could wrap a piece of masking tape or packing tape around that end and form a handle. Once the whole strip is fitted, remove the tape and glue it in. If you've beveled the edge slightly, you can just wedge it in and clamps won't be necessary.

Ross

btw, nice job so far. What is the dark wood?

Messages In This Thread

Final strips
Dale Frolander -- Tuesday, 18 January 2000, at 4:59 a.m.

Re: Final strips
Kent LeBoutillier -- Tuesday, 18 January 2000, at 6:35 a.m.

Re: Final strips
Dale Frolander -- Tuesday, 18 January 2000, at 10:11 a.m.

Re: Final strips
Ross Leidy -- Tuesday, 18 January 2000, at 10:17 a.m.

Re: Final strips
Dale Frolander -- Tuesday, 18 January 2000, at 10:31 a.m.

Re: Final strips
Kent LeBoutillier -- Tuesday, 18 January 2000, at 11:52 a.m.

Re: Final strips
Jim Eisenmenger -- Tuesday, 18 January 2000, at 7:05 a.m.

Re: Final strips
Dale Frolander -- Tuesday, 18 January 2000, at 10:24 a.m.

Making and Dipping of Filler Strips
mike allen -- Tuesday, 18 January 2000, at 9:19 p.m.

Re: Final strips
Joe Greenley -- Tuesday, 18 January 2000, at 11:18 a.m.

Re: Final strips
Dale Frolander -- Tuesday, 18 January 2000, at 2:14 p.m.

Re: Final strips
Greg -- Tuesday, 18 January 2000, at 11:22 p.m.

KBBS Archive 20,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.