Welcome to the Kayak Building Bulletin Board Archive sponsored by Guillemot Kayaks. To post a new message go to the Kayak Building Bulletin Board.

KBBS Archive 20,000

Message Index

Boat Photos
Dennis -- Thursday, 13 January 2000, at 7:40 p.m.
19 messages -- Newest posted Friday, 14 January 2000, at 7:54 p.m.

Re: Beautiful boats
Tom Kurth -- Thursday, 13 January 2000, at 7:55 p.m.
1 message

Thigh Braces - Photo
Joe Greenley -- Thursday, 13 January 2000, at 9:43 p.m.
13 messages -- Newest posted Sunday, 16 January 2000, at 12:40 p.m.

I wish I could thank you all enough
Quent -- Thursday, 13 January 2000, at 10:07 p.m.
4 messages -- Newest posted Sunday, 16 January 2000, at 2:12 a.m.

Re: Spare/Storm Paddles
erez -- Friday, 14 January 2000, at 12:36 a.m.
3 messages -- Newest posted Friday, 14 January 2000, at 12:30 p.m.

Re: tightening skin on frame
David Walker -- Friday, 14 January 2000, at 1:29 a.m.
4 messages -- Newest posted Friday, 14 January 2000, at 5:52 p.m.

Re: Shock Cord End Ideas
Scotty -- Friday, 14 January 2000, at 2:12 a.m.
1 message

colloring Mas Epoxy
Jack Mitenbuler -- Friday, 14 January 2000, at 10:32 a.m.
4 messages -- Newest posted Sunday, 16 January 2000, at 2:26 p.m.

Gunwales - epoxied 'em
Ross Leidy -- Friday, 14 January 2000, at 10:34 a.m.
3 messages -- Newest posted Friday, 14 January 2000, at 12:10 p.m.

stuttering
Jessica Johnsen -- Friday, 14 January 2000, at 3:26 p.m.
16 messages -- Newest posted Tuesday, 18 January 2000, at 3:57 p.m.

recessed cockpit on Pygmy
Steve Nieman -- Friday, 14 January 2000, at 5:18 p.m.
9 messages -- Newest posted Tuesday, 18 January 2000, at 10:06 a.m.

Re: Stitching wire for Coho
steve -- Friday, 14 January 2000, at 7:17 p.m.
1 message

Pygmy vs. CLC
Darrel F. -- Friday, 14 January 2000, at 10:34 p.m.
10 messages -- Newest posted Monday, 17 January 2000, at 9:06 a.m.

Re: skin on frame lots of questions
Bram -- Saturday, 15 January 2000, at 11:27 a.m.
1 message

Source of foam rollers in Canada
Hank -- Saturday, 15 January 2000, at 2:24 p.m.
1 message

Tight seams on a CLC kayak, how can it be done?
Will Stark -- Saturday, 15 January 2000, at 10:52 p.m.
22 messages -- Newest posted Thursday, 20 January 2000, at 2:33 p.m.

For whom is design software useful??
David Walker -- Sunday, 16 January 2000, at 2:00 a.m.
16 messages -- Newest posted Tuesday, 18 January 2000, at 1:21 a.m.

Launched Plywood Walrus
Mike Hanks -- Sunday, 16 January 2000, at 2:42 a.m.
2 messages -- Newest posted Sunday, 16 January 2000, at 3:09 a.m.

Setting the Gunwales
Archer -- Sunday, 16 January 2000, at 7:37 a.m.
3 messages -- Newest posted Tuesday, 18 January 2000, at 9:24 a.m.

Side Mount Kayak Rack
Rick Hewitt -- Sunday, 16 January 2000, at 12:02 p.m.
4 messages -- Newest posted Monday, 17 January 2000, at 4:02 p.m.

Kayak Pics, How Do You Post Them?
Paul Willliams -- Sunday, 16 January 2000, at 10:47 p.m.
4 messages -- Newest posted Tuesday, 18 January 2000, at 8:00 p.m.

Coho Frames
Bruce -- Sunday, 16 January 2000, at 11:55 p.m.
4 messages -- Newest posted Tuesday, 18 January 2000, at 12:42 a.m.

Barry and Monel Staples? Server Error
Mike Hanks -- Monday, 17 January 2000, at 12:58 a.m.
2 messages -- Newest posted Monday, 17 January 2000, at 1:13 a.m.

Expoxy drip where I don`t want it!
eric -- Monday, 17 January 2000, at 1:36 a.m.
5 messages -- Newest posted Monday, 17 January 2000, at 9:57 p.m.

Just a thought on painting...
Doug Bauer -- Monday, 17 January 2000, at 10:23 a.m.
8 messages -- Newest posted Thursday, 20 January 2000, at 1:43 p.m.

"Sairy Gamp" Small Kayak
Randy Ames -- Monday, 17 January 2000, at 11:39 a.m.
1 message

How much Glass
Derek -- Monday, 17 January 2000, at 11:48 a.m.
1 message

Coho pic
Chris Bush -- Monday, 17 January 2000, at 12:55 p.m.
3 messages -- Newest posted Wednesday, 19 January 2000, at 1:26 a.m.

Compass Mount
Steve Nieman -- Monday, 17 January 2000, at 7:31 p.m.
9 messages -- Newest posted Saturday, 22 January 2000, at 10:10 p.m.

plywood framed skin construction
Joel Goodman -- Monday, 17 January 2000, at 7:42 p.m.
2 messages -- Newest posted Tuesday, 18 January 2000, at 1:09 a.m.

Ripping blade
Mike -- Monday, 17 January 2000, at 9:53 p.m.
8 messages -- Newest posted Thursday, 20 January 2000, at 12:56 p.m.

Some pictures of my strip built Kayak
Jason Miller -- Monday, 17 January 2000, at 10:28 p.m.
5 messages -- Newest posted Tuesday, 25 January 2000, at 5:39 p.m.

Greenland - skin on frame
jed -- Monday, 17 January 2000, at 11:05 p.m.
2 messages -- Newest posted Tuesday, 18 January 2000, at 1:17 a.m.

Final strips
Dale Frolander -- Tuesday, 18 January 2000, at 4:59 a.m.
12 messages -- Newest posted Tuesday, 18 January 2000, at 11:22 p.m.

Torro leaf blower
Jay Babina -- Tuesday, 18 January 2000, at 12:19 p.m.
3 messages -- Newest posted Tuesday, 18 January 2000, at 7:55 p.m.

Cool plane
Ross Leidy -- Tuesday, 18 January 2000, at 12:36 p.m.
6 messages -- Newest posted Thursday, 20 January 2000, at 1:02 p.m.

Coho Questions
Doyle -- Tuesday, 18 January 2000, at 1:41 p.m.
5 messages -- Newest posted Tuesday, 18 January 2000, at 9:23 p.m.

Tight seams on CLC kayak. Fluting and Beading?
Will Stark -- Tuesday, 18 January 2000, at 2:52 p.m.
10 messages -- Newest posted Friday, 21 January 2000, at 6:51 a.m.

So what's it worth?
Doug Bauer -- Tuesday, 18 January 2000, at 5:02 p.m.
13 messages -- Newest posted Friday, 21 January 2000, at 8:24 a.m.

Post Endeavour 17 project...
B.J. -- Tuesday, 18 January 2000, at 11:12 p.m.
3 messages -- Newest posted Wednesday, 19 January 2000, at 9:58 a.m.

cove and bead
Tom Kurth -- Tuesday, 18 January 2000, at 11:41 p.m.
5 messages -- Newest posted Wednesday, 19 January 2000, at 10:19 a.m.

Okoume = Gaboon?
Paul Lund -- Wednesday, 19 January 2000, at 1:58 a.m.
3 messages -- Newest posted Wednesday, 19 January 2000, at 11:24 a.m.

Re: So what's it worth?
Ian Johnston -- Wednesday, 19 January 2000, at 2:08 a.m.
1 message

quality control
Jim Eisenmenger -- Wednesday, 19 January 2000, at 6:58 a.m.
1 message

Re: So what's it worth?
Doug Bauer -- Wednesday, 19 January 2000, at 9:30 a.m.
1 message

Butt Joints - Blocks or Tape ???
Greg Hicks -- Wednesday, 19 January 2000, at 10:39 a.m.
3 messages -- Newest posted Wednesday, 19 January 2000, at 11:57 a.m.

George's Website Address?
Joe Greenley -- Wednesday, 19 January 2000, at 10:55 a.m.
1 message

Cabinet Scrapers
Will Stark -- Wednesday, 19 January 2000, at 11:08 a.m.
6 messages -- Newest posted Friday, 21 January 2000, at 9:06 a.m.

Pics from Mike Hanks
Brian T. Cunningham -- Wednesday, 19 January 2000, at 12:51 p.m.
19 messages -- Newest posted Friday, 21 January 2000, at 10:01 a.m.

Beveling Shear Clamps
Peter H -- Wednesday, 19 January 2000, at 1:52 p.m.
14 messages -- Newest posted Thursday, 20 January 2000, at 8:05 p.m.

Re: So what's it worth?
Shawn Baker -- Wednesday, 19 January 2000, at 2:17 p.m.
1 message

Durability problems
Steve Groufsky -- Wednesday, 19 January 2000, at 2:21 p.m.
16 messages -- Newest posted Saturday, 22 January 2000, at 3:59 p.m.

Rationalizing overbuilding
Nolan -- Wednesday, 19 January 2000, at 3:00 p.m.
1 message

Camper Canoe
Brian T. Cunningham -- Wednesday, 19 January 2000, at 8:26 p.m.
3 messages -- Newest posted Thursday, 20 January 2000, at 12:42 p.m.

Re: :)
Shawn Baker -- Wednesday, 19 January 2000, at 9:16 p.m.
1 message

Re: Final strips
Dale Frolander -- Wednesday, 19 January 2000, at 9:30 p.m.
1 message

Re: :)
Steve Groufsky -- Thursday, 20 January 2000, at 12:37 a.m.
2 messages -- Newest posted Thursday, 20 January 2000, at 7:54 p.m.

New member & paddle photos
Spidey -- Thursday, 20 January 2000, at 1:11 a.m.
8 messages -- Newest posted Friday, 21 January 2000, at 5:55 p.m.

Australia Bound - Photo
Joe Greenley -- Thursday, 20 January 2000, at 3:34 a.m.
12 messages -- Newest posted Saturday, 29 January 2000, at 1:32 a.m.

Keepers Footbraces in CLC
Pete Roszyk -- Thursday, 20 January 2000, at 2:23 p.m.
5 messages -- Newest posted Saturday, 22 January 2000, at 8:57 a.m.

Cabinet Scraper Question
Paul Willliams -- Thursday, 20 January 2000, at 11:53 p.m.
9 messages -- Newest posted Monday, 24 January 2000, at 7:06 p.m.

Standard Spray Skirt Dimensions?
Dave Houser -- Friday, 21 January 2000, at 1:07 a.m.
5 messages -- Newest posted Sunday, 23 January 2000, at 1:54 a.m.

Glue problems
Kent LeBoutillier -- Friday, 21 January 2000, at 6:18 a.m.
14 messages -- Newest posted Saturday, 22 January 2000, at 2:12 a.m.

Durability
Chris Casazza -- Friday, 21 January 2000, at 8:16 a.m.
2 messages -- Newest posted Friday, 21 January 2000, at 11:04 p.m.

How do you cut Kevlar ?
Marty H -- Friday, 21 January 2000, at 8:25 a.m.
2 messages -- Newest posted Friday, 21 January 2000, at 9:23 a.m.

Skin on Frame -skin question
Kelly Trehearne -- Friday, 21 January 2000, at 9:33 a.m.
20 messages -- Newest posted Friday, 28 January 2000, at 3:46 a.m.

Adventures in Scarfing: Hull panel mis-alignment
Will -- Friday, 21 January 2000, at 12:43 p.m.
17 messages -- Newest posted Wednesday, 26 January 2000, at 9:06 a.m.

Bow Abrasion
Ed -- Friday, 21 January 2000, at 3:15 p.m.
8 messages -- Newest posted Saturday, 22 January 2000, at 3:45 p.m.

Building my first stripper
Tim Shelburne -- Friday, 21 January 2000, at 3:35 p.m.
4 messages -- Newest posted Saturday, 22 January 2000, at 7:18 p.m.

Source of okoume plywood in western Canada?
Richard Boyle -- Friday, 21 January 2000, at 4:14 p.m.
3 messages -- Newest posted Tuesday, 25 January 2000, at 12:27 p.m.

Marine Paint (avail in Portland OR?)
Nate -- Friday, 21 January 2000, at 5:57 p.m.
7 messages -- Newest posted Friday, 28 January 2000, at 10:15 p.m.

how much epoxy?
craig ward -- Friday, 21 January 2000, at 9:07 p.m.
7 messages -- Newest posted Monday, 24 January 2000, at 12:33 p.m.

Re: How do you cut Kevlar ?
Paul Lund -- Friday, 21 January 2000, at 9:07 p.m.
1 message

Re: How do you cut Kevlar ?
Mike -- Friday, 21 January 2000, at 10:19 p.m.
3 messages -- Newest posted Wednesday, 26 January 2000, at 1:56 a.m.

Re: Australia Bound - Photo
Ian Johnston -- Saturday, 22 January 2000, at 1:07 a.m.
1 message

Re: Australia Bound - Photo
Joe Greenley -- Saturday, 22 January 2000, at 1:54 a.m.
3 messages -- Newest posted Saturday, 22 January 2000, at 8:49 p.m.

"Fair" Play
Ted Fink -- Saturday, 22 January 2000, at 8:45 a.m.
8 messages -- Newest posted Sunday, 23 January 2000, at 9:50 a.m.

CLC templates
Chris Kohut -- Saturday, 22 January 2000, at 9:11 a.m.
3 messages -- Newest posted Monday, 24 January 2000, at 4:21 p.m.

Sea Kayaker`s plan for West River 180
Jean,Montreal, -- Saturday, 22 January 2000, at 9:52 a.m.
5 messages -- Newest posted Sunday, 23 January 2000, at 9:36 a.m.

Besides sinew.....
Archer Hedendahl -- Saturday, 22 January 2000, at 1:20 p.m.
2 messages -- Newest posted Sunday, 23 January 2000, at 2:37 a.m.

Finished,Now what??
Chris Howie -- Saturday, 22 January 2000, at 1:42 p.m.
2 messages -- Newest posted Saturday, 22 January 2000, at 5:48 p.m.

A Middle School Kayak?
Ray Matthews -- Saturday, 22 January 2000, at 3:35 p.m.
8 messages -- Newest posted Monday, 31 January 2000, at 12:05 p.m.

Any UK Kayak Builders
peter -- Saturday, 22 January 2000, at 3:39 p.m.
4 messages -- Newest posted Wednesday, 2 February 2000, at 8:13 p.m.

The Hybrid: It Floats! (jpg)
Pete Roszyk -- Saturday, 22 January 2000, at 8:55 p.m.
10 messages -- Newest posted Tuesday, 25 January 2000, at 1:36 a.m.

Safest way to cut hatches?
Dean Trexel -- Saturday, 22 January 2000, at 8:57 p.m.
19 messages -- Newest posted Sunday, 6 February 2000, at 1:09 p.m.

Continued BBS problems
Nick Schade -- Sunday, 23 January 2000, at 4:50 p.m.
5 messages -- Newest posted Monday, 24 January 2000, at 3:13 p.m.

Update on first boat & advice needed
Tim Shelburne -- Monday, 24 January 2000, at 11:34 a.m.
4 messages -- Newest posted Wednesday, 26 January 2000, at 1:46 p.m.

Advice on butt joints
Brian T. Cunningham -- Monday, 24 January 2000, at 3:19 p.m.
13 messages -- Newest posted Friday, 28 January 2000, at 9:59 p.m.

Sanding epoxy
Earl Bailey -- Monday, 24 January 2000, at 7:22 p.m.
5 messages -- Newest posted Tuesday, 25 January 2000, at 6:15 p.m.

Artic Tern, Dimple In Side Panel
Paul Willliams -- Monday, 24 January 2000, at 7:23 p.m.
3 messages -- Newest posted Monday, 24 January 2000, at 8:44 p.m.

Epoxy over hatch design
Don -- Monday, 24 January 2000, at 8:11 p.m.
7 messages -- Newest posted Tuesday, 1 February 2000, at 1:05 a.m.

Stitching the Opsry Keel
Wayne R. -- Tuesday, 25 January 2000, at 5:49 a.m.
13 messages -- Newest posted Friday, 28 January 2000, at 10:28 a.m.

Re: Striping without staples
Tony Ling -- Tuesday, 25 January 2000, at 12:59 p.m.
1 message

Heresy
Shawn Baker -- Tuesday, 25 January 2000, at 5:39 p.m.
17 messages -- Newest posted Tuesday, 1 February 2000, at 12:10 a.m.

A quick Tech Question
Jack -- Tuesday, 25 January 2000, at 6:10 p.m.
2 messages -- Newest posted Tuesday, 25 January 2000, at 8:58 p.m.

Re: :)
Shawn Baker -- Tuesday, 25 January 2000, at 10:23 p.m.
1 message

Kerosene heat and MAS epoxy
Brian B -- Wednesday, 26 January 2000, at 8:08 a.m.
7 messages -- Newest posted Wednesday, 26 January 2000, at 7:06 p.m.

KeelShield to prevent scratches?
Dave Houser -- Wednesday, 26 January 2000, at 9:40 a.m.
4 messages -- Newest posted Thursday, 27 January 2000, at 7:45 p.m.

Wood Strip Car
Nick Schade - Guillemot Kayaks -- Wednesday, 26 January 2000, at 10:59 a.m.
6 messages -- Newest posted Thursday, 27 January 2000, at 11:33 p.m.

New questions
Chris Loeliger -- Wednesday, 26 January 2000, at 1:47 p.m.
18 messages -- Newest posted Thursday, 27 January 2000, at 6:38 p.m.

Re: :)
Shawn Baker -- Wednesday, 26 January 2000, at 6:25 p.m.
4 messages -- Newest posted Wednesday, 26 January 2000, at 11:31 p.m.

Steel constructions of any difficulty
T.Veisberg -- Wednesday, 26 January 2000, at 6:46 p.m.
12 messages -- Newest posted Wednesday, 2 February 2000, at 6:48 a.m.

Table saw
Steve Groufsky -- Wednesday, 26 January 2000, at 7:50 p.m.
16 messages -- Newest posted Sunday, 30 January 2000, at 7:31 p.m.

Changing cockpit size
Larry C. -- Wednesday, 26 January 2000, at 9:28 p.m.
6 messages -- Newest posted Thursday, 27 January 2000, at 9:03 a.m.

kayak design
Johnnie McNeely -- Wednesday, 26 January 2000, at 11:29 p.m.
3 messages -- Newest posted Thursday, 27 January 2000, at 10:41 a.m.

Inside of the hull?
Fritjof Karlsson -- Thursday, 27 January 2000, at 2:05 a.m.
8 messages -- Newest posted Tuesday, 1 February 2000, at 8:46 a.m.

Raft Building
Dave -- Thursday, 27 January 2000, at 7:46 a.m.
5 messages -- Newest posted Thursday, 27 January 2000, at 1:23 p.m.

Sources for elastomeric coatings?
Doug Bauer -- Thursday, 27 January 2000, at 9:11 a.m.
8 messages -- Newest posted Friday, 28 January 2000, at 4:21 p.m.

WW Kayak Paddles
Curt Taylor -- Thursday, 27 January 2000, at 10:22 a.m.
4 messages -- Newest posted Saturday, 29 January 2000, at 9:07 p.m.

Calling Bowron Lakes Veterans
Nate -- Thursday, 27 January 2000, at 5:08 p.m.
4 messages -- Newest posted Monday, 31 January 2000, at 10:40 p.m.

Help with offset chart
Peter -- Thursday, 27 January 2000, at 5:16 p.m.
5 messages -- Newest posted Monday, 31 January 2000, at 1:26 a.m.

Okoume in Portland, OR?
Bill McClelland -- Thursday, 27 January 2000, at 6:15 p.m.
2 messages -- Newest posted Thursday, 27 January 2000, at 10:40 p.m.

Score!!! (I think?)
Mike Hanks -- Thursday, 27 January 2000, at 11:57 p.m.
8 messages -- Newest posted Saturday, 29 January 2000, at 1:13 p.m.

Spoke Shave
Ken Finger -- Friday, 28 January 2000, at 7:43 a.m.
9 messages -- Newest posted Saturday, 29 January 2000, at 12:10 a.m.

CA glue for strip building
Spidey -- Friday, 28 January 2000, at 1:22 p.m.
13 messages -- Newest posted Monday, 31 January 2000, at 9:39 p.m.

Wee Lassie or Feather
Jason -- Friday, 28 January 2000, at 2:55 p.m.
3 messages -- Newest posted Monday, 31 January 2000, at 9:28 a.m.

Source for mahogany in New England
Bruce -- Friday, 28 January 2000, at 4:12 p.m.
6 messages -- Newest posted Sunday, 30 January 2000, at 10:51 p.m.

Cypress Strips for Kayak
Don -- Friday, 28 January 2000, at 4:52 p.m.
7 messages -- Newest posted Monday, 31 January 2000, at 10:09 a.m.

Rudder
Ed Scullywest -- Saturday, 29 January 2000, at 1:25 a.m.
4 messages -- Newest posted Saturday, 29 January 2000, at 11:38 a.m.

I've lost my fingertip :(
Marcelo -- Saturday, 29 January 2000, at 6:28 p.m.
24 messages -- Newest posted Friday, 25 February 2000, at 9:02 p.m.

hatch-in-bulkhead?
Dean Trexel -- Saturday, 29 January 2000, at 6:42 p.m.
7 messages -- Newest posted Sunday, 30 January 2000, at 10:27 p.m.

3rd Newfound Rendezvous question
Dean Trexel -- Saturday, 29 January 2000, at 6:57 p.m.
6 messages -- Newest posted Monday, 31 January 2000, at 9:15 a.m.

Boat Photos Follow-up
Dennis -- Saturday, 29 January 2000, at 7:58 p.m.
2 messages -- Newest posted Sunday, 30 January 2000, at 6:38 p.m.

MAS epoxy - cure time?
jed -- Saturday, 29 January 2000, at 8:44 p.m.
3 messages -- Newest posted Sunday, 30 January 2000, at 7:10 p.m.

Stripper Sailboats
BUZZY -- Sunday, 30 January 2000, at 9:17 a.m.
4 messages -- Newest posted Tuesday, 1 February 2000, at 5:08 p.m.

Dull Varnish
Alan Resinger -- Sunday, 30 January 2000, at 11:27 a.m.
3 messages -- Newest posted Sunday, 30 January 2000, at 12:14 p.m.

first boat; Baltic Birch Plywood
Bill Jankowski -- Sunday, 30 January 2000, at 1:57 p.m.
5 messages -- Newest posted Wednesday, 2 February 2000, at 7:04 p.m.

epoxy hull first
PHIL COOK -- Sunday, 30 January 2000, at 8:18 p.m.
2 messages -- Newest posted Sunday, 30 January 2000, at 8:52 p.m.

"Cuda" kayak
Don -- Sunday, 30 January 2000, at 8:31 p.m.
2 messages -- Newest posted Sunday, 30 January 2000, at 11:20 p.m.

deck/hull joint prep question
Dean Trexel -- Sunday, 30 January 2000, at 8:44 p.m.
2 messages -- Newest posted Sunday, 30 January 2000, at 10:10 p.m.

Spruce strips for a kayak?
Hank -- Sunday, 30 January 2000, at 9:12 p.m.
11 messages -- Newest posted Wednesday, 2 February 2000, at 10:39 a.m.

Are these books available?
David Walker -- Sunday, 30 January 2000, at 11:43 p.m.
10 messages -- Newest posted Tuesday, 1 February 2000, at 6:25 p.m.

Old cedar might be brittle ??
Spidey -- Monday, 31 January 2000, at 12:11 a.m.
12 messages -- Newest posted Wednesday, 2 February 2000, at 12:45 a.m.

Bandsaw ripping
Steve Groufsky -- Monday, 31 January 2000, at 4:13 a.m.
2 messages -- Newest posted Monday, 31 January 2000, at 7:42 p.m.

_hanks _o all of you
Marcelo 9 7/8 -- Monday, 31 January 2000, at 7:09 a.m.
2 messages -- Newest posted Monday, 31 January 2000, at 8:59 a.m.

Philip Greene Canoes Story
Darrell K. Pearse -- Monday, 31 January 2000, at 11:07 a.m.
1 message

starting a guillemot double
Lance Alldrin -- Monday, 31 January 2000, at 12:04 p.m.
3 messages -- Newest posted Tuesday, 1 February 2000, at 10:37 p.m.

Hatch seals...to glue or not to glue?
Doug Bauer -- Monday, 31 January 2000, at 5:11 p.m.
12 messages -- Newest posted Wednesday, 2 February 2000, at 9:37 p.m.

removing mold release wax?
craig appleyard -- Monday, 31 January 2000, at 11:41 p.m.
4 messages -- Newest posted Tuesday, 1 February 2000, at 6:49 p.m.

Pls Help - Need info on building 1st kayak
Brion -- Tuesday, 1 February 2000, at 12:48 a.m.
4 messages -- Newest posted Tuesday, 1 February 2000, at 9:49 a.m.

Little Kayak Book - Out of Print
Peter H -- Tuesday, 1 February 2000, at 12:34 p.m.
1 message

Really, really light glass
Ross Leidy -- Tuesday, 1 February 2000, at 2:35 p.m.
8 messages -- Newest posted Thursday, 3 February 2000, at 3:03 p.m.

the BoatShop builds a Baidarka
Brian T. Cunningham -- Tuesday, 1 February 2000, at 5:22 p.m.
10 messages -- Newest posted Saturday, 5 February 2000, at 7:32 p.m.

Cypress Strips for Canoes / Kayaks
Chris in Cajun Country -- Tuesday, 1 February 2000, at 6:16 p.m.
1 message

OKOUME supplier west central Florida????
Ed -- Tuesday, 1 February 2000, at 7:58 p.m.
2 messages -- Newest posted Tuesday, 1 February 2000, at 10:23 p.m.

Composit
Andy -- Tuesday, 1 February 2000, at 9:01 p.m.
3 messages -- Newest posted Wednesday, 2 February 2000, at 1:11 a.m.

Looking for S&G plans
Mark Woodhead -- Tuesday, 1 February 2000, at 9:03 p.m.
3 messages -- Newest posted Wednesday, 2 February 2000, at 4:57 p.m.

Sit on top S&G??
Mike -- Wednesday, 2 February 2000, at 1:18 a.m.
10 messages -- Newest posted Thursday, 3 February 2000, at 8:04 p.m.

building my first kayak
Kane Finch -- Wednesday, 2 February 2000, at 4:44 a.m.
1 message

composite paddle blades construction
pete czerpak -- Wednesday, 2 February 2000, at 10:05 a.m.
2 messages -- Newest posted Thursday, 3 February 2000, at 10:43 a.m.

Suggestive Curves: Sex Sells
Jack -- Wednesday, 2 February 2000, at 10:52 a.m.
1 message

Double Guillemot - progress update
Derek -- Wednesday, 2 February 2000, at 12:35 p.m.
1 message

Coaming Lip - Help???
Steve in San Diego -- Wednesday, 2 February 2000, at 3:27 p.m.
4 messages -- Newest posted Saturday, 5 February 2000, at 5:08 p.m.

Concidering taking the plunge
Chris Menard -- Wednesday, 2 February 2000, at 3:49 p.m.
15 messages -- Newest posted Thursday, 3 February 2000, at 6:18 p.m.

Cutting Strips - advice needed
Peter Griffiths -- Wednesday, 2 February 2000, at 4:01 p.m.
6 messages -- Newest posted Wednesday, 2 February 2000, at 7:00 p.m.

Cutting Strips - I did it Today!
Spidey -- Wednesday, 2 February 2000, at 8:07 p.m.
8 messages -- Newest posted Thursday, 3 February 2000, at 5:55 p.m.

fiberglass chopper gun
Robert -- Wednesday, 2 February 2000, at 9:02 p.m.
18 messages -- Newest posted Saturday, 5 February 2000, at 5:17 a.m.

Need source of Kevlar Fabric
Richard -- Wednesday, 2 February 2000, at 9:54 p.m.
2 messages -- Newest posted Thursday, 3 February 2000, at 7:18 a.m.

a few wood questions
Chris Loeliger -- Thursday, 3 February 2000, at 12:44 a.m.
4 messages -- Newest posted Thursday, 3 February 2000, at 9:10 a.m.

bead and cove, or plain flat edged strips??
Steve McGeorge -- Thursday, 3 February 2000, at 3:02 a.m.
17 messages -- Newest posted Monday, 7 February 2000, at 12:28 p.m.

Wood Flour = Saw Dust?
Bill Jankowski -- Thursday, 3 February 2000, at 7:09 p.m.
5 messages -- Newest posted Friday, 11 February 2000, at 12:25 a.m.

Knee Tube - (Right up Shawns Alley)
Chris Dore -- Thursday, 3 February 2000, at 7:44 p.m.
18 messages -- Newest posted Friday, 4 February 2000, at 10:16 p.m.

Re: bead and cove, or plain flat edged strips??
john mayer -- Thursday, 3 February 2000, at 8:27 p.m.
1 message

Re: Sanding Before Glassing
john mayer -- Thursday, 3 February 2000, at 9:04 p.m.
1 message

Chesapeake 16LT aft bulkhead radius?
JG -- Thursday, 3 February 2000, at 10:33 p.m.
6 messages -- Newest posted Friday, 4 February 2000, at 12:25 p.m.

Stapled or Stapleless building???
Hank -- Friday, 4 February 2000, at 9:40 a.m.
17 messages -- Newest posted Monday, 14 February 2000, at 12:13 a.m.

Peel and ply tape?
Kent LeBoutillier -- Friday, 4 February 2000, at 12:30 p.m.
3 messages -- Newest posted Wednesday, 9 February 2000, at 5:37 p.m.

Epoxy fill coat problems
Tedley in VT. -- Friday, 4 February 2000, at 1:22 p.m.
5 messages -- Newest posted Monday, 7 February 2000, at 11:57 a.m.

Buying Strips
Chris Menard -- Friday, 4 February 2000, at 1:38 p.m.
3 messages -- Newest posted Saturday, 5 February 2000, at 12:29 a.m.

Re: Need source of Kevlar Fabric
Mike Scarborough -- Friday, 4 February 2000, at 6:26 p.m.
1 message

CONTEST! What's wrong with this Picture?
Spidey -- Saturday, 5 February 2000, at 12:59 a.m.
10 messages -- Newest posted Monday, 7 February 2000, at 10:46 p.m.

No more cratering with RAKA!
George Burns -- Saturday, 5 February 2000, at 3:08 a.m.
4 messages -- Newest posted Monday, 14 February 2000, at 11:21 a.m.

Guillemot triple update.
Dale Frolander -- Saturday, 5 February 2000, at 4:00 a.m.
5 messages -- Newest posted Sunday, 6 February 2000, at 4:02 a.m.

Nailing into epoxy?
Craig Ward -- Saturday, 5 February 2000, at 8:35 a.m.
4 messages -- Newest posted Saturday, 5 February 2000, at 10:15 a.m.

ultralight bulletin board
BUZZY -- Saturday, 5 February 2000, at 9:19 a.m.
10 messages -- Newest posted Monday, 7 February 2000, at 8:15 p.m.

wet wood
Don Campbell -- Saturday, 5 February 2000, at 10:43 a.m.
5 messages -- Newest posted Monday, 7 February 2000, at 9:29 a.m.

Good points
Paul G. Jacobson -- Saturday, 5 February 2000, at 4:13 p.m.
2 messages -- Newest posted Monday, 7 February 2000, at 7:12 a.m.

cockpit layout
Larry C. -- Saturday, 5 February 2000, at 9:36 p.m.
4 messages -- Newest posted Monday, 7 February 2000, at 12:19 a.m.

Building the Osprey Standard
Wayne R. -- Sunday, 6 February 2000, at 12:08 p.m.
4 messages -- Newest posted Monday, 7 February 2000, at 10:39 a.m.

Building a Night Heron
Dan Salveta -- Sunday, 6 February 2000, at 1:10 p.m.
3 messages -- Newest posted Monday, 7 February 2000, at 9:17 a.m.

Clamps ON SALE
Mike Hanks -- Sunday, 6 February 2000, at 5:31 p.m.
10 messages -- Newest posted Thursday, 10 February 2000, at 12:13 p.m.

Redbird Canoe Form Question
Travis -- Sunday, 6 February 2000, at 7:37 p.m.
2 messages -- Newest posted Monday, 7 February 2000, at 7:55 a.m.

Butt joints and removing stiching
t madill -- Sunday, 6 February 2000, at 8:16 p.m.
4 messages -- Newest posted Tuesday, 8 February 2000, at 12:13 a.m.

Nick's S&G - matching deck & hull
Jim Eisenmenger -- Monday, 7 February 2000, at 9:06 a.m.
1 message

Greenland paddle - so heavy
Ross Leidy -- Monday, 7 February 2000, at 12:08 p.m.
25 messages -- Newest posted Thursday, 10 February 2000, at 5:22 a.m.

Shellac on the forms
Spidey -- Monday, 7 February 2000, at 11:08 p.m.
10 messages -- Newest posted Tuesday, 8 February 2000, at 11:14 p.m.

Steel for StrongBack?
Travis -- Monday, 7 February 2000, at 11:54 p.m.
4 messages -- Newest posted Tuesday, 8 February 2000, at 12:15 p.m.

anyone in jax/fernandina area
Johnnie McNeely -- Tuesday, 8 February 2000, at 1:08 a.m.
1 message

anyone in jax/fernandina area
Johnnie McNeely -- Tuesday, 8 February 2000, at 1:15 a.m.
1 message

Breakaway Forms
Chris Menard -- Tuesday, 8 February 2000, at 8:35 a.m.
2 messages -- Newest posted Tuesday, 8 February 2000, at 9:32 a.m.

Strip cutting adventures...
Hank -- Tuesday, 8 February 2000, at 11:25 a.m.
13 messages -- Newest posted Monday, 14 February 2000, at 8:43 a.m.

stich and glue "play" boat
tom preska -- Tuesday, 8 February 2000, at 1:08 p.m.
11 messages -- Newest posted Thursday, 10 February 2000, at 7:00 a.m.

Hatch cutting went well
Dean Trexel -- Tuesday, 8 February 2000, at 7:22 p.m.
1 message

which glue will adhese to c. cell foam ?
erez -- Tuesday, 8 February 2000, at 11:39 p.m.
10 messages -- Newest posted Friday, 11 February 2000, at 1:02 p.m.

Artic Tern Foot Pegs
Paul Willliams -- Wednesday, 9 February 2000, at 12:19 a.m.
5 messages -- Newest posted Wednesday, 9 February 2000, at 9:16 p.m.

mick - About your bevel filing technique
Spidey -- Wednesday, 9 February 2000, at 3:19 a.m.
10 messages -- Newest posted Thursday, 10 February 2000, at 9:39 p.m.

building a sea sock
Marian Gunkel -- Wednesday, 9 February 2000, at 1:11 p.m.
6 messages -- Newest posted Thursday, 10 February 2000, at 2:56 p.m.

Cast your vote for my accent strip (image)
Shawn Baker -- Wednesday, 9 February 2000, at 2:01 p.m.
31 messages -- Newest posted Thursday, 10 February 2000, at 4:06 p.m.

Baidarkas, geodesic aerolite boats
Nathan -- Wednesday, 9 February 2000, at 2:28 p.m.
8 messages -- Newest posted Saturday, 12 February 2000, at 7:20 a.m.

Mold release for Nick-style hatch lip
Dean Trexel -- Wednesday, 9 February 2000, at 8:29 p.m.
4 messages -- Newest posted Thursday, 10 February 2000, at 8:14 a.m.

Greenland paddle - pic1
Ross Leidy -- Thursday, 10 February 2000, at 9:02 a.m.
9 messages -- Newest posted Friday, 11 February 2000, at 2:19 p.m.

stitch and glue boat
Dan Urist -- Thursday, 10 February 2000, at 4:32 p.m.
7 messages -- Newest posted Friday, 11 February 2000, at 10:59 a.m.

removing glue
Joan Spinner -- Thursday, 10 February 2000, at 8:42 p.m.
8 messages -- Newest posted Saturday, 12 February 2000, at 10:53 p.m.

Warning about my shellac post
Spidey -- Thursday, 10 February 2000, at 11:49 p.m.
1 message

Router Bits (budget?)
Mike Hanks -- Friday, 11 February 2000, at 11:38 a.m.
13 messages -- Newest posted Monday, 14 February 2000, at 12:51 p.m.

Cedar Strip boats are; Fragile????
Derek -- Friday, 11 February 2000, at 3:07 p.m.
3 messages -- Newest posted Friday, 11 February 2000, at 10:14 p.m.

Re: Eagle America
Mike Hanks -- Friday, 11 February 2000, at 6:04 p.m.
4 messages -- Newest posted Saturday, 12 February 2000, at 4:31 p.m.

wood and canvas
scooter -- Friday, 11 February 2000, at 6:46 p.m.
2 messages -- Newest posted Friday, 11 February 2000, at 7:10 p.m.

wood and canvas
scooter -- Friday, 11 February 2000, at 6:57 p.m.
4 messages -- Newest posted Saturday, 12 February 2000, at 1:20 p.m.

More Deck Design Possibilities - Image
Joe Greenley -- Friday, 11 February 2000, at 7:17 p.m.
6 messages -- Newest posted Sunday, 13 February 2000, at 4:24 p.m.

Progress! (Boards scarfed for CLC LT 17)
Bill Jankowski -- Saturday, 12 February 2000, at 10:18 a.m.
3 messages -- Newest posted Saturday, 12 February 2000, at 9:37 p.m.

Hip Braces on Osprey Double
Tom Davies -- Saturday, 12 February 2000, at 4:40 p.m.
4 messages -- Newest posted Wednesday, 16 February 2000, at 8:41 p.m.

Blotchy sealer coat on spruce strips
Larry -- Saturday, 12 February 2000, at 9:19 p.m.
1 message

building sea kayak
Cathy -- Saturday, 12 February 2000, at 11:23 p.m.
5 messages -- Newest posted Monday, 14 February 2000, at 10:28 a.m.

Aliphatic / PVA glue
Simon Fitz-Gerald -- Sunday, 13 February 2000, at 3:25 a.m.
2 messages -- Newest posted Sunday, 13 February 2000, at 10:59 p.m.

Re: fruitless
Kelly Trehearne -- Sunday, 13 February 2000, at 6:22 a.m.
2 messages -- Newest posted Sunday, 13 February 2000, at 11:57 a.m.

Epoxy that didn't go off - Help!
Chris in Cajun Country -- Sunday, 13 February 2000, at 10:55 a.m.
6 messages -- Newest posted Monday, 14 February 2000, at 1:27 p.m.

My new projekt (pics)
Hans Friedel -- Sunday, 13 February 2000, at 12:32 p.m.
5 messages -- Newest posted Sunday, 13 February 2000, at 2:53 p.m.

Setting up forms - any tips?
Peter -- Sunday, 13 February 2000, at 3:05 p.m.
2 messages -- Newest posted Sunday, 13 February 2000, at 10:34 p.m.

Artic Tern - Recessed Deck Fittings
Paul Willliams -- Sunday, 13 February 2000, at 4:03 p.m.
26 messages -- Newest posted Wednesday, 23 February 2000, at 6:55 a.m.

Re: bananas
lee -- Sunday, 13 February 2000, at 4:33 p.m.
1 message

Tyvek as a skin
Quent -- Sunday, 13 February 2000, at 5:12 p.m.
4 messages -- Newest posted Sunday, 13 February 2000, at 11:22 p.m.

geodesic aeroolite boats
Ed -- Sunday, 13 February 2000, at 6:46 p.m.
8 messages -- Newest posted Wednesday, 16 February 2000, at 3:33 p.m.

Re: fruitless
David Dick -- Monday, 14 February 2000, at 7:35 a.m.
1 message

Is it too late?
Doug Bauer -- Monday, 14 February 2000, at 11:05 a.m.
4 messages -- Newest posted Monday, 14 February 2000, at 1:57 p.m.

hatch locations
Tom Preska -- Monday, 14 February 2000, at 11:20 a.m.
9 messages -- Newest posted Tuesday, 15 February 2000, at 9:55 a.m.

Hardware
Mike Snell -- Monday, 14 February 2000, at 11:58 a.m.
4 messages -- Newest posted Monday, 14 February 2000, at 2:02 p.m.

cleaning epoxy resin off hull panels
Julie Kanarr -- Monday, 14 February 2000, at 12:57 p.m.
15 messages -- Newest posted Wednesday, 16 February 2000, at 12:35 a.m.

[Delurking] Damp S&G Panels
Tim Stough -- Monday, 14 February 2000, at 2:20 p.m.
2 messages -- Newest posted Monday, 14 February 2000, at 5:49 p.m.

Oh Happy Day and Thank You
Liz Leedham -- Monday, 14 February 2000, at 3:16 p.m.
8 messages -- Newest posted Tuesday, 15 February 2000, at 3:24 p.m.

Question for George
Dean Trexel -- Monday, 14 February 2000, at 7:19 p.m.
2 messages -- Newest posted Tuesday, 15 February 2000, at 9:44 a.m.

Bad start: Need some epoxy advice
Larry Sutton -- Monday, 14 February 2000, at 9:18 p.m.
10 messages -- Newest posted Thursday, 17 February 2000, at 10:39 a.m.

kayak paddle blade construction
Brent -- Tuesday, 15 February 2000, at 12:17 a.m.
1 message

Stapleless so far - Website updates
Spidey -- Tuesday, 15 February 2000, at 1:10 a.m.
21 messages -- Newest posted Thursday, 17 February 2000, at 3:41 a.m.

Drop check!
Jack Martin -- Tuesday, 15 February 2000, at 8:54 a.m.
5 messages -- Newest posted Thursday, 17 February 2000, at 4:39 a.m.

Building Order
Derek -- Tuesday, 15 February 2000, at 11:35 a.m.
3 messages -- Newest posted Tuesday, 15 February 2000, at 2:02 p.m.

Deck Fittings
James Neely -- Tuesday, 15 February 2000, at 12:02 p.m.
3 messages -- Newest posted Tuesday, 15 February 2000, at 1:01 p.m.

Re: Question for George
Dean Trexel -- Tuesday, 15 February 2000, at 6:55 p.m.
1 message

Stapleless.....and winning
Rick thomas -- Tuesday, 15 February 2000, at 8:47 p.m.
2 messages -- Newest posted Wednesday, 16 February 2000, at 12:20 a.m.

Request for newbie kayak building advice
Steven Jarvis -- Tuesday, 15 February 2000, at 11:01 p.m.
18 messages -- Newest posted Friday, 25 February 2000, at 12:00 a.m.

Re: Question for George
Bart Castleberry -- Tuesday, 15 February 2000, at 11:24 p.m.
1 message

Re: Question for George
Ian Johnston -- Wednesday, 16 February 2000, at 3:41 a.m.
1 message

Varnish or Urethane which is best???
Hank -- Wednesday, 16 February 2000, at 8:32 a.m.
19 messages -- Newest posted Monday, 28 February 2000, at 7:28 a.m.

solvents
lee -- Wednesday, 16 February 2000, at 9:30 a.m.
2 messages -- Newest posted Wednesday, 16 February 2000, at 11:06 a.m.

Internal Stems
Chris Menard -- Wednesday, 16 February 2000, at 10:11 a.m.
4 messages -- Newest posted Wednesday, 16 February 2000, at 3:30 p.m.

Respond top stapless building
Rick thomas -- Wednesday, 16 February 2000, at 10:38 a.m.
1 message

Paddle-building pages (Dean - don't read)
Ross Leidy -- Wednesday, 16 February 2000, at 12:35 p.m.
29 messages -- Newest posted Thursday, 24 February 2000, at 6:26 p.m.

Glassing my Guillemot
Marcelo 9 7/8 -- Wednesday, 16 February 2000, at 1:03 p.m.
2 messages -- Newest posted Wednesday, 16 February 2000, at 1:40 p.m.

idea for quick cinstruction
Ryan White -- Wednesday, 16 February 2000, at 2:50 p.m.
16 messages -- Newest posted Thursday, 17 February 2000, at 5:08 p.m.

Getting a new kayak hauler
Dean Trexel -- Wednesday, 16 February 2000, at 7:58 p.m.
31 messages -- Newest posted Monday, 6 March 2000, at 10:39 p.m.

storage volume of CLC boats
Quent -- Wednesday, 16 February 2000, at 9:53 p.m.
14 messages -- Newest posted Sunday, 20 February 2000, at 11:49 a.m.

Marine plywood in Seattle?
Ian Salkind -- Wednesday, 16 February 2000, at 10:24 p.m.
6 messages -- Newest posted Friday, 18 February 2000, at 12:26 p.m.

Re: Question for George
Ian Johnston -- Thursday, 17 February 2000, at 2:02 a.m.
1 message

favorite seat?
deeds -- Thursday, 17 February 2000, at 11:25 a.m.
10 messages -- Newest posted Saturday, 19 February 2000, at 1:38 a.m.

Hollow shaft Paddles
Kent LeBoutillier -- Thursday, 17 February 2000, at 12:08 p.m.
21 messages -- Newest posted Saturday, 18 March 2000, at 7:59 p.m.

Child safety seat
Paul G. Jacobson -- Thursday, 17 February 2000, at 12:49 p.m.
2 messages -- Newest posted Friday, 25 February 2000, at 8:16 p.m.

the importance of gloves
erez -- Thursday, 17 February 2000, at 1:09 p.m.
12 messages -- Newest posted Saturday, 19 February 2000, at 2:36 p.m.

Varnish
Doyle -- Thursday, 17 February 2000, at 1:21 p.m.
3 messages -- Newest posted Friday, 25 February 2000, at 8:05 p.m.

Kits, kits everywhere...
Tim Stough -- Thursday, 17 February 2000, at 3:09 p.m.
13 messages -- Newest posted Saturday, 19 February 2000, at 2:49 p.m.

Re: Question for George
Dean Trexel -- Thursday, 17 February 2000, at 4:51 p.m.
1 message

OOPS.....
John D. -- Thursday, 17 February 2000, at 10:18 p.m.
5 messages -- Newest posted Sunday, 20 February 2000, at 10:58 p.m.

Stapleless Update
Spidey -- Friday, 18 February 2000, at 1:09 a.m.
1 message

shearwater boats
pete czerpak -- Friday, 18 February 2000, at 9:28 a.m.
17 messages -- Newest posted Wednesday, 23 February 2000, at 7:49 a.m.

Vacuum Bagging: Has anyone tried it?
Jack -- Friday, 18 February 2000, at 10:40 a.m.
25 messages -- Newest posted Friday, 25 February 2000, at 7:57 p.m.

Visiting the US
Marcelo 9 7/8 -- Friday, 18 February 2000, at 12:57 p.m.
4 messages -- Newest posted Sunday, 20 February 2000, at 3:32 p.m.

S&G questions
garland reese -- Friday, 18 February 2000, at 10:08 p.m.
10 messages -- Newest posted Thursday, 24 February 2000, at 2:59 p.m.

We're going to do it!
Cathy -- Friday, 18 February 2000, at 10:16 p.m.
5 messages -- Newest posted Monday, 21 February 2000, at 1:25 p.m.

Plywood in the Portland Oregon area?
Bob Hysen -- Friday, 18 February 2000, at 10:46 p.m.
3 messages -- Newest posted Wednesday, 23 February 2000, at 3:45 p.m.

Respirators
Shawn Baker -- Friday, 18 February 2000, at 11:19 p.m.
9 messages -- Newest posted Saturday, 19 February 2000, at 11:35 p.m.

WALL STORAGE
Phil Newman -- Saturday, 19 February 2000, at 1:23 a.m.
14 messages -- Newest posted Wednesday, 23 February 2000, at 10:52 p.m.

Sprayskirt size
Dennis Horak -- Saturday, 19 February 2000, at 8:29 a.m.
6 messages -- Newest posted Tuesday, 22 February 2000, at 7:29 p.m.

Re: some merit
Bram -- Sunday, 20 February 2000, at 11:54 a.m.
1 message

Latex gloves
Ed -- Sunday, 20 February 2000, at 1:12 p.m.
6 messages -- Newest posted Thursday, 24 February 2000, at 12:43 a.m.

Applying graphics
Brion -- Sunday, 20 February 2000, at 8:31 p.m.
13 messages -- Newest posted Thursday, 24 February 2000, at 12:53 p.m.

Deck Rigging
tom preska -- Sunday, 20 February 2000, at 10:15 p.m.
8 messages -- Newest posted Monday, 21 February 2000, at 12:51 p.m.

Coho? Osprey HP???
John D. -- Sunday, 20 February 2000, at 11:42 p.m.
8 messages -- Newest posted Monday, 28 February 2000, at 12:02 p.m.

Birch Strips
Roland Baldwin -- Monday, 21 February 2000, at 2:23 a.m.
11 messages -- Newest posted Tuesday, 7 March 2000, at 10:10 p.m.

Two combing questions
Dale Frolander -- Monday, 21 February 2000, at 2:56 a.m.
12 messages -- Newest posted Wednesday, 23 February 2000, at 1:44 p.m.

My method of stapleless construction
Walter H. Klaus -- Monday, 21 February 2000, at 7:40 a.m.
8 messages -- Newest posted Monday, 21 February 2000, at 7:15 p.m.

Re: Vacuum Bagging: Has anyone tried it?
Matthew Bastian -- Monday, 21 February 2000, at 9:14 a.m.
1 message

Visiting California... any builders?
Hank -- Monday, 21 February 2000, at 12:32 p.m.
14 messages -- Newest posted Thursday, 24 February 2000, at 8:36 p.m.

Rigging Bow & Stern Ends
Paul Willliams -- Monday, 21 February 2000, at 12:40 p.m.
10 messages -- Newest posted Thursday, 24 February 2000, at 8:26 p.m.

My Latest Project
Kent LeBoutillier -- Monday, 21 February 2000, at 1:02 p.m.
18 messages -- Newest posted Wednesday, 23 February 2000, at 10:53 p.m.

Problum with Rob Macks North Star plans?
Brian Ruttle -- Monday, 21 February 2000, at 3:22 p.m.
14 messages -- Newest posted Thursday, 24 February 2000, at 4:46 p.m.

Epoxy drips and so forth...
Jonathan Goulding -- Monday, 21 February 2000, at 4:44 p.m.
8 messages -- Newest posted Tuesday, 22 February 2000, at 7:41 a.m.

Anyone built a Redbird
Chris Dore -- Tuesday, 22 February 2000, at 11:17 a.m.
6 messages -- Newest posted Friday, 25 February 2000, at 11:24 p.m.

Re-working Laughing Loon, NorthStar Plans?!
Brian Ruttle -- Tuesday, 22 February 2000, at 11:56 a.m.
19 messages -- Newest posted Sunday, 27 February 2000, at 9:27 a.m.

Rebuilding a Klepper
Lew Crenshaw -- Tuesday, 22 February 2000, at 12:17 p.m.
5 messages -- Newest posted Friday, 25 February 2000, at 12:02 p.m.

grades of okuome (1088 vs 6566)
pete czerpak -- Tuesday, 22 February 2000, at 1:37 p.m.
7 messages -- Newest posted Friday, 25 February 2000, at 11:47 a.m.

hip and knee braces, Olympic Penninsula
Dave Uebele -- Tuesday, 22 February 2000, at 3:01 p.m.
20 messages -- Newest posted Thursday, 24 February 2000, at 11:56 a.m.

Cormorant 16 offsets up
Grant Goltz -- Wednesday, 23 February 2000, at 12:13 a.m.
6 messages -- Newest posted Wednesday, 23 February 2000, at 5:40 p.m.

Stitchless S&G construction
Gary B. -- Wednesday, 23 February 2000, at 1:07 a.m.
9 messages -- Newest posted Saturday, 26 February 2000, at 11:56 a.m.

Tern weathercoking and such performance
pete czerpak -- Wednesday, 23 February 2000, at 8:38 a.m.
8 messages -- Newest posted Friday, 25 February 2000, at 7:33 p.m.

VCP hatches ???
willy dommen -- Wednesday, 23 February 2000, at 11:13 a.m.
20 messages -- Newest posted Monday, 28 February 2000, at 4:18 p.m.

Suggestions for routing B&C on strips?
Hank -- Wednesday, 23 February 2000, at 11:28 a.m.
8 messages -- Newest posted Thursday, 24 February 2000, at 11:06 p.m.

Planing Fresh (Green) Epoxy
Paul C. -- Wednesday, 23 February 2000, at 11:59 a.m.
7 messages -- Newest posted Friday, 25 February 2000, at 8:46 p.m.

Using Two Different Epoxies
Fritz OConnor -- Wednesday, 23 February 2000, at 2:37 p.m.
2 messages -- Newest posted Thursday, 24 February 2000, at 6:26 p.m.

Using Different Epoxies
Fritz OConnor -- Wednesday, 23 February 2000, at 6:51 p.m.
11 messages -- Newest posted Tuesday, 29 February 2000, at 7:55 p.m.

minicell
Berkeley C. -- Wednesday, 23 February 2000, at 6:51 p.m.
24 messages -- Newest posted Saturday, 26 February 2000, at 10:20 a.m.

Seats, float bags & fitting out
Steve in San Diego -- Wednesday, 23 February 2000, at 7:21 p.m.
1 message

Brian,this is George
lee -- Wednesday, 23 February 2000, at 9:07 p.m.
1 message

Re: which is often just what you wanted
Ross Leidy -- Wednesday, 23 February 2000, at 10:38 p.m.
1 message

System 3 trial pack
Ed -- Wednesday, 23 February 2000, at 10:44 p.m.
7 messages -- Newest posted Friday, 25 February 2000, at 12:04 a.m.

Outside stems or not?
Travis -- Wednesday, 23 February 2000, at 11:56 p.m.
2 messages -- Newest posted Thursday, 24 February 2000, at 8:12 a.m.

Foot braces for an Arctic Tern
Michael Brokenshire -- Thursday, 24 February 2000, at 9:28 a.m.
4 messages -- Newest posted Thursday, 24 February 2000, at 8:01 p.m.

cabinet scrapers
Chris Bush -- Thursday, 24 February 2000, at 3:23 p.m.
8 messages -- Newest posted Saturday, 4 March 2000, at 10:49 p.m.

Another Flush-Hatch Question
Dennis -- Thursday, 24 February 2000, at 6:57 p.m.
7 messages -- Newest posted Saturday, 26 February 2000, at 7:04 a.m.

I Like Your Thinking
Brian Ruttle -- Thursday, 24 February 2000, at 8:38 p.m.
1 message

Prep for glassing the hull
Dave Murphy -- Thursday, 24 February 2000, at 8:53 p.m.
4 messages -- Newest posted Friday, 25 February 2000, at 12:47 p.m.

Re: which is often just what you wanted
Ross Leidy -- Thursday, 24 February 2000, at 9:05 p.m.
1 message

$10 router bit set does bead, cove, and planing
Paul G. Jacobson -- Friday, 25 February 2000, at 9:22 a.m.
7 messages -- Newest posted Tuesday, 29 February 2000, at 10:57 p.m.

Have you heard the one about...?
Steve Nieman -- Friday, 25 February 2000, at 4:40 p.m.
7 messages -- Newest posted Sunday, 27 February 2000, at 6:01 p.m.

I'M A SICK PUP!
Kent LeBoutillier -- Friday, 25 February 2000, at 7:24 p.m.
8 messages -- Newest posted Thursday, 2 March 2000, at 9:06 p.m.

quiz - image
erez -- Friday, 25 February 2000, at 9:56 p.m.
14 messages -- Newest posted Wednesday, 1 March 2000, at 7:42 p.m.

Re: You get what you ask for
Bruce -- Friday, 25 February 2000, at 10:51 p.m.
1 message

What am I missing here?
Bruce -- Friday, 25 February 2000, at 11:08 p.m.
2 messages -- Newest posted Saturday, 26 February 2000, at 12:01 a.m.

Stapleless Update
Spidey -- Saturday, 26 February 2000, at 12:37 a.m.
4 messages -- Newest posted Tuesday, 29 February 2000, at 6:46 p.m.

Paddle plans
Johnnie McNeely -- Saturday, 26 February 2000, at 11:26 a.m.
6 messages -- Newest posted Wednesday, 1 March 2000, at 7:05 p.m.

Polyester Resin as a Final Finish?
Spidey -- Saturday, 26 February 2000, at 1:53 p.m.
7 messages -- Newest posted Tuesday, 29 February 2000, at 1:50 a.m.

Finally Started
Larry Thompson -- Saturday, 26 February 2000, at 11:16 p.m.
3 messages -- Newest posted Sunday, 27 February 2000, at 10:46 a.m.

Page Up!
Bill Jankowski -- Sunday, 27 February 2000, at 8:22 a.m.
5 messages -- Newest posted Wednesday, 1 March 2000, at 10:26 p.m.

South Puget Sound Wooden Kayak Paddling Club
Jerry K -- Sunday, 27 February 2000, at 11:16 a.m.
2 messages -- Newest posted Sunday, 27 February 2000, at 5:51 p.m.

IDIDIT
Ray Irons -- Sunday, 27 February 2000, at 1:46 p.m.
6 messages -- Newest posted Sunday, 27 February 2000, at 9:14 p.m.

design vs reality
Steve Davis -- Sunday, 27 February 2000, at 2:10 p.m.
8 messages -- Newest posted Wednesday, 1 March 2000, at 8:12 p.m.

around Manhattan
Thor-Erik Johansen -- Sunday, 27 February 2000, at 2:42 p.m.
12 messages -- Newest posted Thursday, 16 March 2000, at 10:21 p.m.

cove and bead
Don Campbell -- Sunday, 27 February 2000, at 6:03 p.m.
2 messages -- Newest posted Sunday, 27 February 2000, at 6:44 p.m.

Newbie seeking advice on which model
Jerry Hayes -- Sunday, 27 February 2000, at 6:05 p.m.
3 messages -- Newest posted Monday, 6 March 2000, at 3:13 p.m.

Internal Bunge
Doyle -- Sunday, 27 February 2000, at 6:12 p.m.
4 messages -- Newest posted Tuesday, 29 February 2000, at 11:09 p.m.

"feathering" a kayak paddle
Quent -- Sunday, 27 February 2000, at 6:26 p.m.
8 messages -- Newest posted Tuesday, 29 February 2000, at 7:37 p.m.

Bendable Plywood
Bill Heuser -- Sunday, 27 February 2000, at 9:06 p.m.
3 messages -- Newest posted Wednesday, 1 March 2000, at 1:15 p.m.

West system epoxy Portland
Bob Hysen -- Sunday, 27 February 2000, at 11:34 p.m.
3 messages -- Newest posted Wednesday, 8 March 2000, at 10:57 p.m.

lofting and diagonals
Joey Brannon -- Monday, 28 February 2000, at 12:04 a.m.
3 messages -- Newest posted Wednesday, 1 March 2000, at 6:50 p.m.

Ran out of strips
Marcelo 9 7/8 -- Monday, 28 February 2000, at 8:04 a.m.
2 messages -- Newest posted Monday, 28 February 2000, at 9:52 p.m.

Joining (and fiberglassing) hull and deck
Marcelo 9 7/8 -- Monday, 28 February 2000, at 8:15 a.m.
9 messages -- Newest posted Wednesday, 1 March 2000, at 6:41 p.m.

good kayak seat...
Jonathan Goulding -- Monday, 28 February 2000, at 8:51 a.m.
13 messages -- Newest posted Tuesday, 29 February 2000, at 7:58 p.m.

Stitching: Like Magic!
Tim Stough -- Monday, 28 February 2000, at 12:18 p.m.
2 messages -- Newest posted Monday, 28 February 2000, at 8:32 p.m.

Kwajalien
Johnnie McNeely -- Monday, 28 February 2000, at 10:41 p.m.
2 messages -- Newest posted Tuesday, 29 February 2000, at 5:56 p.m.

Epoxy over paper and ink
Brian G. -- Tuesday, 29 February 2000, at 1:52 a.m.
38 messages -- Newest posted Friday, 3 March 2000, at 4:47 p.m.

stringing forms
Chris Menard -- Tuesday, 29 February 2000, at 7:43 a.m.
14 messages -- Newest posted Thursday, 2 March 2000, at 8:41 p.m.

want to see a clc kayak in VA
Lee Barnhardt -- Tuesday, 29 February 2000, at 9:54 a.m.
1 message

QUESTION RE SYSTEM 3 EPOXY
t madill -- Tuesday, 29 February 2000, at 10:24 a.m.
6 messages -- Newest posted Thursday, 2 March 2000, at 9:36 p.m.

multipaneled decks
pete czerpak -- Tuesday, 29 February 2000, at 1:21 p.m.
15 messages -- Newest posted Thursday, 2 March 2000, at 12:39 p.m.

Found a Guillemot kit on ebay
Ross Leidy -- Tuesday, 29 February 2000, at 4:01 p.m.
12 messages -- Newest posted Thursday, 2 March 2000, at 9:57 p.m.

Ouch!! Bad Fit . . .
Spidey -- Tuesday, 29 February 2000, at 7:14 p.m.
2 messages -- Newest posted Tuesday, 29 February 2000, at 7:27 p.m.

Skeg questions
Dave Canning -- Wednesday, 1 March 2000, at 12:51 a.m.
42 messages -- Newest posted Saturday, 25 March 2000, at 10:28 p.m.

BUFFING FINAL COAT OF VARNISH
STEVE POLLACK -- Wednesday, 1 March 2000, at 8:16 a.m.
9 messages -- Newest posted Thursday, 2 March 2000, at 11:04 a.m.

Re: Ouch!! Bad Fit . . .
Mark B -- Wednesday, 1 March 2000, at 1:14 p.m.
1 message

Arctic Tern and related stuff
David -- Wednesday, 1 March 2000, at 3:55 p.m.
5 messages -- Newest posted Thursday, 2 March 2000, at 8:52 p.m.

Cormorant Multi-Paneled deck offsets
Grant Goltz -- Wednesday, 1 March 2000, at 5:44 p.m.
1 message

Sanding and fiberglass
John Herr -- Wednesday, 1 March 2000, at 7:55 p.m.
3 messages -- Newest posted Thursday, 2 March 2000, at 7:42 a.m.

Lay up for squirt boat.
David Blodgett -- Wednesday, 1 March 2000, at 11:29 p.m.
7 messages -- Newest posted Thursday, 2 March 2000, at 6:52 p.m.

Machinist's Flea Market FL - This Week
Spidey -- Thursday, 2 March 2000, at 12:45 a.m.
3 messages -- Newest posted Friday, 3 March 2000, at 12:40 a.m.

patuxent 17 or mersanger 17
pete czerpak -- Thursday, 2 March 2000, at 8:40 a.m.
15 messages -- Newest posted Saturday, 4 March 2000, at 8:58 p.m.

Removal of Excess Epoxy
Mike Brack -- Thursday, 2 March 2000, at 3:57 p.m.
9 messages -- Newest posted Saturday, 4 March 2000, at 9:38 p.m.

Carbide cloth cutter??
Randy Knauff -- Thursday, 2 March 2000, at 6:02 p.m.
5 messages -- Newest posted Saturday, 4 March 2000, at 2:10 a.m.

Shop Space Limited? Move It To The Living Room!
Joe Greenley -- Thursday, 2 March 2000, at 6:16 p.m.
23 messages -- Newest posted Tuesday, 7 March 2000, at 1:15 p.m.

Unusual Wood for NE - Pacific Cypress??
John B. -- Thursday, 2 March 2000, at 6:52 p.m.
3 messages -- Newest posted Friday, 3 March 2000, at 6:50 p.m.

fillers & white wood
Tom Kurth -- Thursday, 2 March 2000, at 11:17 p.m.
2 messages -- Newest posted Friday, 3 March 2000, at 1:27 p.m.

Need suggestions with bow & stern stems
Spidey -- Friday, 3 March 2000, at 12:15 a.m.
13 messages -- Newest posted Sunday, 5 March 2000, at 7:11 p.m.

12-1/2 degree Block Plane
Spidey -- Friday, 3 March 2000, at 12:50 a.m.
24 messages -- Newest posted Tuesday, 7 March 2000, at 12:12 p.m.

Interesting boat building web page
Nolan -- Friday, 3 March 2000, at 7:24 a.m.
2 messages -- Newest posted Sunday, 5 March 2000, at 7:56 a.m.

Defthane polyurethane
Bill Light -- Friday, 3 March 2000, at 12:32 p.m.
1 message

WEB HOSTING
Greg Hicks -- Friday, 3 March 2000, at 2:10 p.m.
2 messages -- Newest posted Saturday, 4 March 2000, at 9:31 a.m.

Why add linseed oil to paint
Robert Sonday -- Friday, 3 March 2000, at 2:30 p.m.
5 messages -- Newest posted Monday, 6 March 2000, at 11:00 a.m.

Flaking Epoxy?!
Brion -- Friday, 3 March 2000, at 2:56 p.m.
9 messages -- Newest posted Tuesday, 7 March 2000, at 12:53 a.m.

St Patty's Day by Shawn
Nick Schade - Guillemot Kayaks -- Friday, 3 March 2000, at 6:06 p.m.
1 message

Source of Fiberglass
Larry Thompson -- Friday, 3 March 2000, at 11:36 p.m.
4 messages -- Newest posted Saturday, 4 March 2000, at 2:21 p.m.

equipment stores in Dallas TX
erez -- Friday, 3 March 2000, at 11:45 p.m.
3 messages -- Newest posted Monday, 6 March 2000, at 2:26 p.m.

Red fish
Johnnie McNeely -- Saturday, 4 March 2000, at 12:00 a.m.
24 messages -- Newest posted Monday, 6 March 2000, at 5:02 a.m.

Kayak Modifications
Johnnie McNeely -- Saturday, 4 March 2000, at 1:44 a.m.
5 messages -- Newest posted Thursday, 9 March 2000, at 9:51 p.m.

Chamfering deck joints on multipaneled deck
Gary B -- Saturday, 4 March 2000, at 1:49 a.m.
2 messages -- Newest posted Saturday, 4 March 2000, at 10:45 p.m.

rudder
dave mcadoo -- Saturday, 4 March 2000, at 10:21 a.m.
2 messages -- Newest posted Wednesday, 8 March 2000, at 9:36 p.m.

More pix up + question
Spidey -- Sunday, 5 March 2000, at 12:23 a.m.
6 messages -- Newest posted Tuesday, 7 March 2000, at 9:16 p.m.

strongback length
John Waddington -- Sunday, 5 March 2000, at 6:57 a.m.
3 messages -- Newest posted Sunday, 5 March 2000, at 12:25 p.m.

Updated Pages
Bill Jankowski -- Sunday, 5 March 2000, at 1:54 p.m.
5 messages -- Newest posted Monday, 6 March 2000, at 8:28 a.m.

this is the cause
garland -- Sunday, 5 March 2000, at 2:41 p.m.
16 messages -- Newest posted Monday, 6 March 2000, at 3:49 p.m.

Hey Nick, Don Has Some Issues !!!
Ian Johnston -- Sunday, 5 March 2000, at 9:15 p.m.
15 messages -- Newest posted Wednesday, 8 March 2000, at 12:12 a.m.

help!
tom Preska -- Sunday, 5 March 2000, at 10:50 p.m.
5 messages -- Newest posted Monday, 6 March 2000, at 10:32 a.m.

'glass
Brett -- Sunday, 5 March 2000, at 11:39 p.m.
3 messages -- Newest posted Monday, 6 March 2000, at 5:54 p.m.

Epoxy
Rick thomas -- Monday, 6 March 2000, at 10:09 a.m.
1 message

S&G or strip built sit-on-top kayak
Steve Kroeker -- Monday, 6 March 2000, at 10:11 a.m.
6 messages -- Newest posted Wednesday, 8 March 2000, at 5:19 p.m.

Translating Nick's book to spanish
Marcelo 9 7/8 -- Monday, 6 March 2000, at 10:21 a.m.
1 message

Painting a skin-on-frame
Kelly Trehearne -- Monday, 6 March 2000, at 10:55 a.m.
5 messages -- Newest posted Monday, 6 March 2000, at 3:37 p.m.

where can I find Minicel Foam?
Warren Ross -- Monday, 6 March 2000, at 2:03 p.m.
6 messages -- Newest posted Tuesday, 7 March 2000, at 12:50 p.m.

Painting Fiberglass
Bill -- Monday, 6 March 2000, at 4:43 p.m.
4 messages -- Newest posted Monday, 6 March 2000, at 9:52 p.m.

Unfair lines!
Johnnie McNeely -- Monday, 6 March 2000, at 6:11 p.m.
11 messages -- Newest posted Tuesday, 7 March 2000, at 9:42 p.m.

Wood for Kayak
Tom Davies -- Monday, 6 March 2000, at 7:30 p.m.
2 messages -- Newest posted Monday, 6 March 2000, at 7:41 p.m.

Another wood question
Tom Davies -- Monday, 6 March 2000, at 8:56 p.m.
2 messages -- Newest posted Monday, 6 March 2000, at 10:11 p.m.

Epoxy Fumes
Will Stark -- Monday, 6 March 2000, at 9:37 p.m.
9 messages -- Newest posted Wednesday, 8 March 2000, at 5:41 p.m.

Live well
Johnnie McNeely -- Monday, 6 March 2000, at 9:59 p.m.
8 messages -- Newest posted Wednesday, 8 March 2000, at 1:20 a.m.

bead&cove router bits
shawn hartnett -- Monday, 6 March 2000, at 10:00 p.m.
7 messages -- Newest posted Wednesday, 8 March 2000, at 7:49 a.m.

Yet another great tool
Spidey -- Monday, 6 March 2000, at 10:22 p.m.
10 messages -- Newest posted Wednesday, 8 March 2000, at 1:11 p.m.

butt joint problems x 2
Sue -- Monday, 6 March 2000, at 10:34 p.m.
6 messages -- Newest posted Tuesday, 7 March 2000, at 3:07 p.m.

Bubbles in the Joints
Bruce -- Monday, 6 March 2000, at 11:12 p.m.
4 messages -- Newest posted Tuesday, 7 March 2000, at 12:36 a.m.

Hey y'all, lee's up on the CLC web cam!
Will Stark -- Tuesday, 7 March 2000, at 12:06 a.m.
8 messages -- Newest posted Thursday, 9 March 2000, at 7:26 a.m.

Re: Found Memories, well what I can remember!
Ian Johnston -- Tuesday, 7 March 2000, at 3:25 a.m.
1 message

SO kayak dream
pete czerpak -- Tuesday, 7 March 2000, at 7:42 a.m.
25 messages -- Newest posted Thursday, 9 March 2000, at 12:38 a.m.

ROTFLMAO!
Shawn Baker -- Tuesday, 7 March 2000, at 11:19 a.m.
6 messages -- Newest posted Wednesday, 8 March 2000, at 12:12 a.m.

Panel coloration and sanding
David -- Tuesday, 7 March 2000, at 3:16 p.m.
3 messages -- Newest posted Tuesday, 7 March 2000, at 3:55 p.m.

Duct tape goo
Chris Loeliger -- Tuesday, 7 March 2000, at 3:58 p.m.
9 messages -- Newest posted Thursday, 9 March 2000, at 11:01 p.m.

Unfair lines part 2
Johnnie McNeely -- Tuesday, 7 March 2000, at 7:44 p.m.
3 messages -- Newest posted Wednesday, 8 March 2000, at 9:49 p.m.

I never pictured George as the drinking type :-)
Doug K -- Tuesday, 7 March 2000, at 11:01 p.m.
1 message

Steam & Hot Air Rule . . .
Spidey -- Wednesday, 8 March 2000, at 2:14 a.m.
3 messages -- Newest posted Wednesday, 8 March 2000, at 12:48 p.m.

Barely off topic: Sense of community
Marcelo 9 7/8 -- Wednesday, 8 March 2000, at 6:07 a.m.
6 messages -- Newest posted Thursday, 9 March 2000, at 4:32 p.m.

Measuring line
Bill Heuser -- Wednesday, 8 March 2000, at 6:48 a.m.
2 messages -- Newest posted Thursday, 9 March 2000, at 6:50 p.m.

Guillemot strip quantity
Chris Menard -- Wednesday, 8 March 2000, at 8:33 a.m.
5 messages -- Newest posted Thursday, 9 March 2000, at 6:45 p.m.

atlanta GA area builders
pete czerpak -- Wednesday, 8 March 2000, at 9:03 a.m.
3 messages -- Newest posted Wednesday, 8 March 2000, at 12:54 p.m.

Guillemot Awards: The envelope please...
Jack -- Wednesday, 8 March 2000, at 10:40 a.m.
11 messages -- Newest posted Thursday, 9 March 2000, at 3:34 p.m.

Dura Tuff
Jay Babina -- Wednesday, 8 March 2000, at 12:17 p.m.
5 messages -- Newest posted Tuesday, 14 March 2000, at 9:34 a.m.

cedar colors
addison -- Wednesday, 8 March 2000, at 5:03 p.m.
4 messages -- Newest posted Thursday, 9 March 2000, at 6:16 p.m.

finish sanding
Craig Ward -- Wednesday, 8 March 2000, at 6:43 p.m.
3 messages -- Newest posted Wednesday, 8 March 2000, at 9:26 p.m.

Re: Well Technically George!
Ian Johnston -- Wednesday, 8 March 2000, at 11:50 p.m.
1 message

saturator gun
flint richter -- Thursday, 9 March 2000, at 12:22 a.m.
1 message

Shops in/near Chicago
Ed Walshe -- Thursday, 9 March 2000, at 3:30 a.m.
7 messages -- Newest posted Friday, 10 March 2000, at 2:45 a.m.

Deck Rigging
Ken Finger -- Thursday, 9 March 2000, at 7:35 a.m.
8 messages -- Newest posted Friday, 10 March 2000, at 7:53 a.m.

strips past end form
mark stevens -- Thursday, 9 March 2000, at 9:47 a.m.
2 messages -- Newest posted Thursday, 9 March 2000, at 11:01 a.m.

Ready for varnish, question...
Alan -- Thursday, 9 March 2000, at 10:01 a.m.
3 messages -- Newest posted Thursday, 9 March 2000, at 11:35 a.m.

Cab-O-Sil Grades
Dennis -- Thursday, 9 March 2000, at 11:44 a.m.
2 messages -- Newest posted Thursday, 9 March 2000, at 3:05 p.m.

Attention Expoxy Fans
Brian T. Cunningham -- Thursday, 9 March 2000, at 3:25 p.m.
1 message

Oxford Rowing Shell
DJ Gaker -- Thursday, 9 March 2000, at 5:49 p.m.
4 messages -- Newest posted Monday, 13 March 2000, at 6:14 p.m.

Paddles
Johnnie McNeely -- Thursday, 9 March 2000, at 10:04 p.m.
5 messages -- Newest posted Friday, 10 March 2000, at 6:19 p.m.

New combing pictures.
Dale Frolander -- Friday, 10 March 2000, at 5:45 a.m.
10 messages -- Newest posted Saturday, 11 March 2000, at 1:25 p.m.

river kayak saga
Jim Eisenmenger -- Friday, 10 March 2000, at 6:57 a.m.
6 messages -- Newest posted Monday, 13 March 2000, at 10:32 p.m.

A table saw ripping technique
Nolan -- Friday, 10 March 2000, at 6:57 a.m.
5 messages -- Newest posted Friday, 10 March 2000, at 4:10 p.m.

Dynel Fabric?
Ratt Boy -- Friday, 10 March 2000, at 11:02 a.m.
6 messages -- Newest posted Monday, 13 March 2000, at 10:19 a.m.

CLC Severn
Ed Coon -- Friday, 10 March 2000, at 1:00 p.m.
22 messages -- Newest posted Thursday, 16 March 2000, at 10:13 p.m.

Fillet Mix questions...
Todd -- Friday, 10 March 2000, at 1:13 p.m.
8 messages -- Newest posted Monday, 13 March 2000, at 9:52 a.m.

Images on kayaks - photocopying onto glass cloth
Grant Goltz -- Friday, 10 March 2000, at 5:08 p.m.
18 messages -- Newest posted Thursday, 16 March 2000, at 1:14 p.m.

Foam Seat Carving Tool
Paul Willliams -- Friday, 10 March 2000, at 11:35 p.m.
5 messages -- Newest posted Monday, 13 March 2000, at 4:14 p.m.

Epoxy and Varnish questions
Tom Davies -- Saturday, 11 March 2000, at 2:30 a.m.
12 messages -- Newest posted Thursday, 16 March 2000, at 4:53 p.m.

Great Day!
Johnnie McNeely -- Saturday, 11 March 2000, at 8:18 a.m.
4 messages -- Newest posted Saturday, 11 March 2000, at 7:19 p.m.

Great Lake Small Craft Symposium 3
Gerald McQuinn -- Saturday, 11 March 2000, at 3:18 p.m.
1 message

Hull prep for cured epoxy?
Will Stark -- Saturday, 11 March 2000, at 7:25 p.m.
3 messages -- Newest posted Saturday, 11 March 2000, at 10:19 p.m.

Coho questions
Doug -- Sunday, 12 March 2000, at 2:53 p.m.
10 messages -- Newest posted Sunday, 19 March 2000, at 10:03 p.m.

Which Epoxy & Hardener do you recommend?
Robert Beggs -- Sunday, 12 March 2000, at 3:23 p.m.
8 messages -- Newest posted Monday, 13 March 2000, at 4:29 p.m.

printing on fiberglass
erez -- Monday, 13 March 2000, at 12:40 a.m.
11 messages -- Newest posted Thursday, 16 March 2000, at 9:25 p.m.

Standard Cockpit Size
Larry Thompson -- Monday, 13 March 2000, at 9:46 a.m.
3 messages -- Newest posted Tuesday, 14 March 2000, at 1:17 p.m.

Who's going to the Maine Wood Boat Show?
Kent LeBoutillier -- Monday, 13 March 2000, at 11:43 a.m.
7 messages -- Newest posted Friday, 17 March 2000, at 7:52 a.m.

Guillemot Photos Finally (image)
Shawn Baker -- Monday, 13 March 2000, at 2:10 p.m.
44 messages -- Newest posted Friday, 17 March 2000, at 4:18 p.m.

you didn't warn me...
Chris Loeliger -- Tuesday, 14 March 2000, at 3:02 a.m.
14 messages -- Newest posted Monday, 20 March 2000, at 12:11 p.m.

A FEW QUESTIONS FROM A BEGINER
CULPER -- Tuesday, 14 March 2000, at 1:35 p.m.
11 messages -- Newest posted Wednesday, 15 March 2000, at 10:21 p.m.

Scarfing the shear clamps
Brian T. Cunningham -- Tuesday, 14 March 2000, at 3:10 p.m.
11 messages -- Newest posted Thursday, 16 March 2000, at 1:44 p.m.

Slow Day at the BBS
Peter H -- Wednesday, 15 March 2000, at 4:38 p.m.
16 messages -- Newest posted Friday, 17 March 2000, at 7:53 a.m.

designing using cad
Bryan Gleason -- Wednesday, 15 March 2000, at 6:28 p.m.
16 messages -- Newest posted Tuesday, 21 March 2000, at 6:50 a.m.

Paddle Problems
Johnnie McNeely -- Wednesday, 15 March 2000, at 8:12 p.m.
14 messages -- Newest posted Friday, 17 March 2000, at 1:45 p.m.

Stems and Visual Laryngitis
Spidey -- Wednesday, 15 March 2000, at 8:40 p.m.
4 messages -- Newest posted Friday, 17 March 2000, at 6:58 p.m.

low angle block planes
Hank -- Wednesday, 15 March 2000, at 10:59 p.m.
4 messages -- Newest posted Thursday, 16 March 2000, at 1:38 p.m.

hey rehd & the others - not kayak related
erez -- Wednesday, 15 March 2000, at 11:07 p.m.
18 messages -- Newest posted Friday, 17 March 2000, at 12:24 p.m.

Cloudy Epoxy
Jody -- Thursday, 16 March 2000, at 12:18 a.m.
6 messages -- Newest posted Saturday, 18 March 2000, at 10:18 a.m.

Putz canvas kayak
Gary Schpero -- Thursday, 16 March 2000, at 11:03 a.m.
4 messages -- Newest posted Friday, 17 March 2000, at 1:25 a.m.

customizing your yak for fishing
dave -- Thursday, 16 March 2000, at 2:45 p.m.
11 messages -- Newest posted Friday, 17 March 2000, at 6:43 p.m.

More Construction Pix (Photo)
Spidey -- Friday, 17 March 2000, at 3:24 a.m.
11 messages -- Newest posted Saturday, 18 March 2000, at 11:13 p.m.

More Construction pictures (photo)
Shawn Baker -- Friday, 17 March 2000, at 11:48 a.m.
12 messages -- Newest posted Saturday, 18 March 2000, at 8:17 p.m.

Erin Go Bragh!
Jim McCool -- Friday, 17 March 2000, at 12:46 p.m.
2 messages -- Newest posted Saturday, 18 March 2000, at 3:19 p.m.

Newbie with some questions
Ed Gandorf -- Friday, 17 March 2000, at 2:46 p.m.
4 messages -- Newest posted Monday, 20 March 2000, at 10:25 a.m.

they want to remove the ban on ivory trade !
Erez -- Friday, 17 March 2000, at 3:04 p.m.
7 messages -- Newest posted Sunday, 19 March 2000, at 12:34 a.m.

THANKS !! One down 3 to go
Brian T. Cunningham -- Friday, 17 March 2000, at 4:23 p.m.
1 message

raka homepage down????
Jay Roberts -- Friday, 17 March 2000, at 6:12 p.m.
9 messages -- Newest posted Sunday, 19 March 2000, at 6:14 p.m.

Measuring small amounts of epoxy
John B. -- Saturday, 18 March 2000, at 1:39 p.m.
12 messages -- Newest posted Monday, 20 March 2000, at 1:28 p.m.

Charleston Show
Johnnie McNeely -- Saturday, 18 March 2000, at 9:43 p.m.
3 messages -- Newest posted Monday, 20 March 2000, at 8:30 a.m.

For Newbies - Last of the Hull Construction
Spidey -- Sunday, 19 March 2000, at 1:02 a.m.
10 messages -- Newest posted Monday, 20 March 2000, at 1:14 p.m.

doorskin plywood for hull???Please advise
Nils S. -- Sunday, 19 March 2000, at 3:06 a.m.
17 messages -- Newest posted Tuesday, 21 March 2000, at 2:42 a.m.

Block Plane Angle
Mitch Isoe -- Sunday, 19 March 2000, at 10:40 a.m.
4 messages -- Newest posted Sunday, 19 March 2000, at 3:46 p.m.

Fiberglass problems on stems!
Travis -- Sunday, 19 March 2000, at 3:07 p.m.
4 messages -- Newest posted Sunday, 19 March 2000, at 6:13 p.m.

Epoxy Drool
Travis -- Sunday, 19 March 2000, at 6:11 p.m.
1 message

Altering form spacing: Outer Island
Cynthia Bates -- Sunday, 19 March 2000, at 9:19 p.m.
1 message

foam for the seat
Kevin -- Sunday, 19 March 2000, at 10:53 p.m.
18 messages -- Newest posted Wednesday, 22 March 2000, at 10:45 a.m.

Lauan plywood warning
David Dick -- Monday, 20 March 2000, at 7:07 a.m.
3 messages -- Newest posted Tuesday, 21 March 2000, at 1:01 a.m.

Kayak design artical in Scientific American
Chris Menard -- Monday, 20 March 2000, at 7:51 a.m.
9 messages -- Newest posted Saturday, 25 March 2000, at 9:13 a.m.

Wood Properties
Chris Casazza -- Monday, 20 March 2000, at 7:55 a.m.
1 message

Unhappy Epoxier
Travis -- Monday, 20 March 2000, at 8:10 a.m.
14 messages -- Newest posted Tuesday, 21 March 2000, at 10:50 p.m.

30 yards of glass
Edgar Kleindinst -- Monday, 20 March 2000, at 8:23 a.m.
2 messages -- Newest posted Monday, 20 March 2000, at 9:14 a.m.

Custom Fiberglass Seat
Shawn Baker -- Monday, 20 March 2000, at 12:10 p.m.
4 messages -- Newest posted Wednesday, 22 March 2000, at 8:51 p.m.

Interthane Paints and Varnishes
Nate -- Monday, 20 March 2000, at 12:50 p.m.
2 messages -- Newest posted Monday, 20 March 2000, at 1:16 p.m.

Cheap Fiberglass
Shawn Baker -- Monday, 20 March 2000, at 12:53 p.m.
1 message

Paddle blades
Ron Stolp -- Monday, 20 March 2000, at 2:39 p.m.
3 messages -- Newest posted Wednesday, 22 March 2000, at 8:46 p.m.

How does 3M do it?
Spidey -- Monday, 20 March 2000, at 6:45 p.m.
23 messages -- Newest posted Wednesday, 22 March 2000, at 11:28 a.m.

kayak seats
jjacques beaulieu -- Monday, 20 March 2000, at 7:13 p.m.
9 messages -- Newest posted Wednesday, 22 March 2000, at 8:33 p.m.

Can't find decent 1/8" plywood! I live in Detroit
Nils S. -- Tuesday, 21 March 2000, at 1:48 a.m.
10 messages -- Newest posted Thursday, 23 March 2000, at 12:29 a.m.

Guillemot Fast Double, deck wont fit hull
Ronald J. Crowley -- Tuesday, 21 March 2000, at 11:51 a.m.
9 messages -- Newest posted Thursday, 20 April 2000, at 9:18 a.m.

Pics with the Coast Guard
Brian T. Cunningham -- Tuesday, 21 March 2000, at 4:36 p.m.
6 messages -- Newest posted Wednesday, 22 March 2000, at 11:46 a.m.

Rudder Sources
Derek Schumann -- Tuesday, 21 March 2000, at 4:38 p.m.
3 messages -- Newest posted Thursday, 23 March 2000, at 3:21 a.m.

Brewery Creek Small Boat Shop?
DJ Gaker -- Tuesday, 21 March 2000, at 4:41 p.m.
5 messages -- Newest posted Wednesday, 22 March 2000, at 10:17 p.m.

Building a Fibreglass Canoe/Kayak
Caesar Bruno -- Tuesday, 21 March 2000, at 6:40 p.m.
6 messages -- Newest posted Friday, 24 March 2000, at 5:57 p.m.

New construction pics
Kent LeBoutillier -- Tuesday, 21 March 2000, at 8:23 p.m.
11 messages -- Newest posted Friday, 24 March 2000, at 4:09 p.m.

deck design
Tom Kurth -- Tuesday, 21 March 2000, at 11:15 p.m.
8 messages -- Newest posted Thursday, 23 March 2000, at 12:24 p.m.

Help! Foot Peg holes
Tom Davies -- Wednesday, 22 March 2000, at 12:58 a.m.
7 messages -- Newest posted Thursday, 23 March 2000, at 10:04 a.m.

Glass of champagne (We hit 25K messages!)
Marcelo 9 7/8 -- Wednesday, 22 March 2000, at 6:49 a.m.
1 message

I'm in Sea Kayaker!!
Shawn Baker -- Wednesday, 22 March 2000, at 9:48 a.m.
5 messages -- Newest posted Thursday, 23 March 2000, at 11:21 p.m.

Free web page providers
Kent LeBoutillier -- Wednesday, 22 March 2000, at 11:19 a.m.
9 messages -- Newest posted Thursday, 23 March 2000, at 10:45 a.m.

strongback design?
Julie Kanarr -- Wednesday, 22 March 2000, at 1:39 p.m.
28 messages -- Newest posted Thursday, 30 March 2000, at 10:05 a.m.

Kayak-builders Heaven
Peter H -- Wednesday, 22 March 2000, at 2:19 p.m.
4 messages -- Newest posted Wednesday, 22 March 2000, at 9:05 p.m.

Great Lakes Small Craft Symposium 3
Gerald McQuinn -- Thursday, 23 March 2000, at 10:43 a.m.
4 messages -- Newest posted Friday, 24 March 2000, at 4:03 p.m.

test pics
Kent LeBoutillier -- Thursday, 23 March 2000, at 12:06 p.m.
7 messages -- Newest posted Friday, 24 March 2000, at 9:35 a.m.

what makes a sea kayak?
goethean -- Thursday, 23 March 2000, at 12:35 p.m.
8 messages -- Newest posted Friday, 24 March 2000, at 11:06 p.m.

car top carrier
Jay Roberts -- Thursday, 23 March 2000, at 6:22 p.m.
25 messages -- Newest posted Monday, 27 March 2000, at 2:36 a.m.

Holy toledo I agree with George!!!
Doug K -- Thursday, 23 March 2000, at 10:42 p.m.
1 message

Greenland paddle
Ed Walshe -- Friday, 24 March 2000, at 7:10 a.m.
13 messages -- Newest posted Tuesday, 28 March 2000, at 9:09 a.m.

New Web site
Kent LeBoutillier -- Friday, 24 March 2000, at 11:52 a.m.
1 message

On purchasing a Yare kayak
lorna -- Friday, 24 March 2000, at 1:33 p.m.
15 messages -- Newest posted Monday, 27 March 2000, at 6:38 p.m.

Posters of your boat
Brian T. Cunningham -- Friday, 24 March 2000, at 3:50 p.m.
1 message

building 1st kayak
Tom Creeley -- Friday, 24 March 2000, at 10:25 p.m.
7 messages -- Newest posted Saturday, 25 March 2000, at 6:41 p.m.

Unhappy epoxier/sander revisited
Travis -- Friday, 24 March 2000, at 10:34 p.m.
2 messages -- Newest posted Saturday, 25 March 2000, at 7:08 a.m.

yellow bungie
Dave Canning -- Saturday, 25 March 2000, at 10:53 a.m.
3 messages -- Newest posted Saturday, 25 March 2000, at 1:57 p.m.

Dumb Epoxy question??
doug -- Saturday, 25 March 2000, at 5:05 p.m.
5 messages -- Newest posted Sunday, 26 March 2000, at 1:54 a.m.

Canvas treatment?
Ben-B -- Saturday, 25 March 2000, at 7:00 p.m.
8 messages -- Newest posted Tuesday, 28 March 2000, at 7:51 a.m.

Re: Greenland paddle
Bill Heuser -- Saturday, 25 March 2000, at 7:09 p.m.
2 messages -- Newest posted Sunday, 26 March 2000, at 5:02 p.m.

epoxy quantity
Tom Kurth -- Saturday, 25 March 2000, at 8:49 p.m.
6 messages -- Newest posted Thursday, 30 March 2000, at 11:24 p.m.

Drilling holes in the boat
Tom Davies -- Saturday, 25 March 2000, at 9:45 p.m.
3 messages -- Newest posted Sunday, 26 March 2000, at 2:24 a.m.

Skeg construction
Gary B -- Sunday, 26 March 2000, at 2:07 a.m.
16 messages -- Newest posted Thursday, 30 March 2000, at 12:05 a.m.

New International symbol for spidey and others
Dale Frolander -- Sunday, 26 March 2000, at 2:08 a.m.
3 messages -- Newest posted Monday, 27 March 2000, at 5:18 a.m.

New Web Page Up...
Tim Stough -- Sunday, 26 March 2000, at 10:32 a.m.
6 messages -- Newest posted Monday, 27 March 2000, at 3:05 p.m.

Need for "Gappers"
Rich Bechtold -- Sunday, 26 March 2000, at 10:37 a.m.
6 messages -- Newest posted Monday, 27 March 2000, at 3:48 p.m.

Outside Air System
Randy Ames -- Sunday, 26 March 2000, at 10:58 a.m.
9 messages -- Newest posted Tuesday, 28 March 2000, at 10:56 p.m.

New Kayak
Hans Friedel -- Sunday, 26 March 2000, at 2:44 p.m.
12 messages -- Newest posted Monday, 27 March 2000, at 3:37 p.m.

Perception Hatch Kits
Frank Costanzo -- Sunday, 26 March 2000, at 3:57 p.m.
5 messages -- Newest posted Thursday, 30 March 2000, at 9:41 a.m.

deck rigging newbie
Steve L. Ostrem -- Sunday, 26 March 2000, at 4:13 p.m.
11 messages -- Newest posted Wednesday, 29 March 2000, at 8:13 p.m.

Re:how far?
lee -- Sunday, 26 March 2000, at 6:00 p.m.
1 message

stripper squirt boat for flat water
david Blodgett -- Sunday, 26 March 2000, at 6:51 p.m.
5 messages -- Newest posted Monday, 27 March 2000, at 11:13 p.m.

stitch and glue plans for 1st time builder
Ken Sutherland -- Sunday, 26 March 2000, at 7:53 p.m.
18 messages -- Newest posted Tuesday, 28 March 2000, at 10:02 p.m.

anothr one hit the water
erez -- Sunday, 26 March 2000, at 10:08 p.m.
4 messages -- Newest posted Tuesday, 28 March 2000, at 1:49 a.m.

And yet another!
Tom Davies -- Sunday, 26 March 2000, at 10:32 p.m.
7 messages -- Newest posted Monday, 27 March 2000, at 11:51 p.m.

hatch lip help
tom Preska -- Sunday, 26 March 2000, at 11:01 p.m.
17 messages -- Newest posted Monday, 3 April 2000, at 11:48 a.m.

Re: epoxy quantity
Rick thomas -- Monday, 27 March 2000, at 12:08 a.m.
2 messages -- Newest posted Monday, 27 March 2000, at 7:55 a.m.

Learn from mistakes
Bill Heuser -- Monday, 27 March 2000, at 8:07 a.m.
4 messages -- Newest posted Monday, 27 March 2000, at 6:43 p.m.

walnut not good for boatbuilding?
Dean Trexel -- Monday, 27 March 2000, at 8:40 a.m.
7 messages -- Newest posted Monday, 27 March 2000, at 1:46 p.m.

What to do?
Derek Schumann -- Monday, 27 March 2000, at 2:00 p.m.
5 messages -- Newest posted Wednesday, 29 March 2000, at 7:35 p.m.

plans for first kayak project for kids
Gary Dabrowski -- Monday, 27 March 2000, at 4:55 p.m.
15 messages -- Newest posted Sunday, 9 April 2000, at 7:08 p.m.

Clean-up time again!
Paul Lund -- Monday, 27 March 2000, at 6:28 p.m.
4 messages -- Newest posted Tuesday, 28 March 2000, at 12:13 p.m.

Another one hits the water
Ken Barron -- Monday, 27 March 2000, at 6:33 p.m.
6 messages -- Newest posted Wednesday, 29 March 2000, at 6:59 p.m.

dacron
lynda smith -- Monday, 27 March 2000, at 8:07 p.m.
3 messages -- Newest posted Monday, 27 March 2000, at 9:44 p.m.

Some ideas
Bill Heuser -- Monday, 27 March 2000, at 9:00 p.m.
3 messages -- Newest posted Tuesday, 28 March 2000, at 10:42 a.m.

Hyperform
Arty -- Monday, 27 March 2000, at 9:32 p.m.
2 messages -- Newest posted Tuesday, 28 March 2000, at 8:14 a.m.

Greenland paddle
Johnnie -- Monday, 27 March 2000, at 9:51 p.m.
10 messages -- Newest posted Wednesday, 29 March 2000, at 1:01 a.m.

adjusting offsets guillemont single
mark evans -- Tuesday, 28 March 2000, at 1:59 a.m.
2 messages -- Newest posted Tuesday, 28 March 2000, at 3:35 a.m.

Re:"far" :)
lee -- Tuesday, 28 March 2000, at 7:11 a.m.
1 message

Skeg and footbrace installation?
Todd -- Tuesday, 28 March 2000, at 12:59 p.m.
12 messages -- Newest posted Friday, 31 March 2000, at 5:05 p.m.

Patuxent
Ben Van Enk -- Tuesday, 28 March 2000, at 2:43 p.m.
11 messages -- Newest posted Sunday, 2 April 2000, at 9:23 p.m.

Storm Paddle
Kent LeBoutillier -- Tuesday, 28 March 2000, at 5:58 p.m.
15 messages -- Newest posted Wednesday, 29 March 2000, at 8:51 p.m.

Fiberglass Tape Edge
Mike Brack -- Tuesday, 28 March 2000, at 9:36 p.m.
10 messages -- Newest posted Wednesday, 29 March 2000, at 4:48 p.m.

Re:"far" :)
lee -- Tuesday, 28 March 2000, at 10:13 p.m.
1 message

Pygmy Deck Modifications... Suggestions?
Tim Stough -- Tuesday, 28 March 2000, at 10:59 p.m.
9 messages -- Newest posted Thursday, 30 March 2000, at 12:07 a.m.

New web site up
John Michne -- Wednesday, 29 March 2000, at 1:01 p.m.
6 messages -- Newest posted Friday, 31 March 2000, at 7:10 a.m.

spray skirt
Steve H. -- Wednesday, 29 March 2000, at 4:13 p.m.
2 messages -- Newest posted Monday, 3 April 2000, at 6:56 a.m.

Interested in building wood framed canvas kayak
Basil Arrick -- Wednesday, 29 March 2000, at 5:43 p.m.
3 messages -- Newest posted Thursday, 30 March 2000, at 11:33 a.m.

Ferrules for paddles
Brian Conklin -- Wednesday, 29 March 2000, at 8:54 p.m.
12 messages -- Newest posted Sunday, 2 April 2000, at 9:36 a.m.

Flush hatch question
Larry -- Wednesday, 29 March 2000, at 9:59 p.m.
2 messages -- Newest posted Thursday, 30 March 2000, at 6:02 a.m.

Sanding-Before-Epoxy Survey
Spidey -- Wednesday, 29 March 2000, at 10:37 p.m.
18 messages -- Newest posted Thursday, 30 March 2000, at 9:30 p.m.

Sqeedunk Cormorant ???'s for GRANT
Wayne Poulsen -- Thursday, 30 March 2000, at 9:39 a.m.
4 messages -- Newest posted Sunday, 2 April 2000, at 12:19 p.m.

The survey continues... the next steps.
Hank -- Thursday, 30 March 2000, at 11:38 a.m.
11 messages -- Newest posted Friday, 31 March 2000, at 10:03 a.m.

Holy Smokes!!!!!!
Doug K -- Thursday, 30 March 2000, at 1:50 p.m.
6 messages -- Newest posted Thursday, 30 March 2000, at 5:09 p.m.

cove and bead
Butch -- Thursday, 30 March 2000, at 3:17 p.m.
26 messages -- Newest posted Monday, 3 April 2000, at 9:44 p.m.

inlaying Pygmies
Chuck Bollong -- Thursday, 30 March 2000, at 3:18 p.m.
6 messages -- Newest posted Monday, 3 April 2000, at 7:16 p.m.

To be or knot to be
Ray -- Thursday, 30 March 2000, at 7:39 p.m.
8 messages -- Newest posted Friday, 31 March 2000, at 4:26 a.m.

Air Compressor!
Johnnie McNeely -- Thursday, 30 March 2000, at 8:01 p.m.
7 messages -- Newest posted Friday, 31 March 2000, at 3:29 p.m.

Keel reinforcement tape frustration
David -- Thursday, 30 March 2000, at 11:41 p.m.
7 messages -- Newest posted Friday, 31 March 2000, at 1:01 p.m.

Epoxy filler
Dale Frolander -- Friday, 31 March 2000, at 5:27 a.m.
6 messages -- Newest posted Friday, 31 March 2000, at 7:35 p.m.

Article on the baidarka...
Hank -- Friday, 31 March 2000, at 8:52 a.m.
13 messages -- Newest posted Wednesday, 5 April 2000, at 3:57 p.m.

And yet another one hits the water...
Paul Lund -- Friday, 31 March 2000, at 9:25 a.m.
11 messages -- Newest posted Monday, 3 April 2000, at 12:50 p.m.

Slightly Off-Topic - Looking for Gutter Clamps
Greg Hicks -- Friday, 31 March 2000, at 10:46 a.m.
5 messages -- Newest posted Saturday, 1 April 2000, at 3:27 p.m.

Can't Decide
Kent LeBoutillier -- Friday, 31 March 2000, at 11:47 a.m.
12 messages -- Newest posted Monday, 3 April 2000, at 3:20 p.m.

Precoat or not?- A survey
Larry C. -- Friday, 31 March 2000, at 12:28 p.m.
16 messages -- Newest posted Monday, 3 April 2000, at 7:30 a.m.

Foot pegs
Toby M. Ebens -- Friday, 31 March 2000, at 7:59 p.m.
10 messages -- Newest posted Monday, 3 April 2000, at 11:34 a.m.

Purplehearted Newby
Warren -- Friday, 31 March 2000, at 8:04 p.m.
5 messages -- Newest posted Monday, 3 April 2000, at 10:40 a.m.

Cockpit Coaming
Tracy -- Friday, 31 March 2000, at 10:06 p.m.
3 messages -- Newest posted Sunday, 2 April 2000, at 9:17 p.m.

Converting to metric
Ole Kjeldgaard -- Saturday, 1 April 2000, at 1:41 p.m.
7 messages -- Newest posted Monday, 3 April 2000, at 5:40 a.m.

Finding cove and bead strips?
Delaney -- Saturday, 1 April 2000, at 4:29 p.m.
3 messages -- Newest posted Sunday, 2 April 2000, at 12:36 p.m.

Cove and Bead info
Delaney -- Saturday, 1 April 2000, at 4:33 p.m.
2 messages -- Newest posted Sunday, 2 April 2000, at 11:49 p.m.

Steel Backbone
Don -- Saturday, 1 April 2000, at 5:05 p.m.
8 messages -- Newest posted Tuesday, 4 April 2000, at 1:10 p.m.

First Picture
Larry Thompson -- Saturday, 1 April 2000, at 11:42 p.m.
2 messages -- Newest posted Sunday, 2 April 2000, at 9:37 a.m.

Pygmy Deck Modifications Done! (picture)
Tim Stough -- Sunday, 2 April 2000, at 2:58 p.m.
11 messages -- Newest posted Monday, 3 April 2000, at 7:05 p.m.

precoat problems
Dale Frolander -- Sunday, 2 April 2000, at 3:09 p.m.
12 messages -- Newest posted Monday, 3 April 2000, at 10:21 p.m.

Missaligned!!
Marcelo -- Sunday, 2 April 2000, at 3:39 p.m.
2 messages -- Newest posted Monday, 3 April 2000, at 12:25 p.m.

Coho Keel Strip
Bruce Kahn -- Sunday, 2 April 2000, at 5:35 p.m.
5 messages -- Newest posted Monday, 3 April 2000, at 4:37 p.m.

N. Alaska Recovery Kayak
Tim LaTourette -- Sunday, 2 April 2000, at 6:10 p.m.
2 messages -- Newest posted Monday, 3 April 2000, at 11:21 a.m.

Screw holes
Don Price -- Sunday, 2 April 2000, at 6:45 p.m.
2 messages -- Newest posted Monday, 3 April 2000, at 7:28 a.m.

Greenland Paddle
Mike Nicholson -- Sunday, 2 April 2000, at 8:48 p.m.
4 messages -- Newest posted Wednesday, 5 April 2000, at 10:46 p.m.

I need advice on these plans
David Blodgett -- Sunday, 2 April 2000, at 10:05 p.m.
4 messages -- Newest posted Tuesday, 4 April 2000, at 2:08 p.m.

S&G Hull- Strip Deck
Johnnie McNeely -- Sunday, 2 April 2000, at 11:12 p.m.
3 messages -- Newest posted Monday, 3 April 2000, at 7:24 a.m.

Wrinkles! :(
Armin -- Sunday, 2 April 2000, at 11:51 p.m.
16 messages -- Newest posted Tuesday, 4 April 2000, at 11:28 a.m.

Color variations
Don Beale -- Monday, 3 April 2000, at 12:27 a.m.
3 messages -- Newest posted Monday, 3 April 2000, at 8:48 p.m.

Lake Union Round Up
eric -- Monday, 3 April 2000, at 1:16 a.m.
4 messages -- Newest posted Tuesday, 4 April 2000, at 1:03 a.m.

New URL for the Kayak Forum
Nick Schade - Guillemot Kayaks -- Monday, 3 April 2000, at 11:53 a.m.
4 messages -- Newest posted Tuesday, 4 April 2000, at 9:51 a.m.

Links: It's all on the web... but where?
Tim Stough -- Monday, 3 April 2000, at 2:09 p.m.
3 messages -- Newest posted Monday, 3 April 2000, at 6:06 p.m.

CLC replace nails with dowels
Bill Heuser -- Monday, 3 April 2000, at 2:52 p.m.
5 messages -- Newest posted Monday, 3 April 2000, at 8:32 p.m.

Attaching Sheer Clamps
Dennis -- Monday, 3 April 2000, at 7:50 p.m.
6 messages -- Newest posted Tuesday, 4 April 2000, at 9:42 p.m.

Any Wood strip get togethers on the East Coast.
Walter H. Klaus -- Monday, 3 April 2000, at 8:56 p.m.
5 messages -- Newest posted Tuesday, 4 April 2000, at 9:46 a.m.

Glassing the SpiderBoat (Photo)
Spidey -- Monday, 3 April 2000, at 10:06 p.m.
29 messages -- Newest posted Tuesday, 11 April 2000, at 10:07 p.m.

You must tell us (off topic?)
David Dick -- Tuesday, 4 April 2000, at 12:57 a.m.
1 message

new boat construction
pete czerpak -- Tuesday, 4 April 2000, at 8:08 a.m.
3 messages -- Newest posted Tuesday, 4 April 2000, at 10:49 a.m.

Greenland style kayaks
Sean Underhill -- Tuesday, 4 April 2000, at 8:11 a.m.
19 messages -- Newest posted Wednesday, 5 April 2000, at 1:27 p.m.

skirt for chessappeake boats
pete czerpak -- Tuesday, 4 April 2000, at 8:12 a.m.
12 messages -- Newest posted Wednesday, 5 April 2000, at 9:55 p.m.

Glassing coaming lips
Kent LeBoutillier -- Tuesday, 4 April 2000, at 9:39 a.m.
4 messages -- Newest posted Thursday, 6 April 2000, at 6:15 a.m.

Scarf joint problem (1/4" x 3/16 strips)
Jason -- Tuesday, 4 April 2000, at 10:00 a.m.
18 messages -- Newest posted Wednesday, 5 April 2000, at 9:39 a.m.

Don Beale's Scarfing Jig
Spidey -- Tuesday, 4 April 2000, at 1:14 p.m.
12 messages -- Newest posted Friday, 7 April 2000, at 1:10 a.m.

Removing uncured fiberglass
Ed Gandorf -- Tuesday, 4 April 2000, at 3:26 p.m.
7 messages -- Newest posted Wednesday, 5 April 2000, at 12:42 a.m.

A Blonde and a Brunette - image - Rendezvous
Joe Greenley -- Tuesday, 4 April 2000, at 8:30 p.m.
11 messages -- Newest posted Wednesday, 5 April 2000, at 4:47 p.m.

Public Apology to 3M
Spidey -- Tuesday, 4 April 2000, at 8:43 p.m.
4 messages -- Newest posted Wednesday, 5 April 2000, at 12:04 p.m.

Come on George, we already knew that one :-)
Doug K -- Wednesday, 5 April 2000, at 4:48 a.m.
1 message

Re: skirt for Chessapeake boats --- short rant
Nolan -- Wednesday, 5 April 2000, at 8:11 a.m.
1 message

Spidey - your steaming tip works great
Jason -- Wednesday, 5 April 2000, at 9:56 a.m.
4 messages -- Newest posted Wednesday, 5 April 2000, at 12:59 p.m.

Wee Lassie II progress (photo)
Ross Leidy -- Wednesday, 5 April 2000, at 10:08 a.m.
15 messages -- Newest posted Thursday, 13 April 2000, at 10:02 a.m.

Hey Marcelo - We're Worried about you . . .
mike allen ---} -- Wednesday, 5 April 2000, at 12:24 p.m.
12 messages -- Newest posted Wednesday, 12 April 2000, at 12:58 p.m.

Ding-All Epoxy Source
Spidey -- Wednesday, 5 April 2000, at 2:53 p.m.
6 messages -- Newest posted Thursday, 6 April 2000, at 11:51 a.m.

aligning forms on strongback
helster -- Wednesday, 5 April 2000, at 8:09 p.m.
9 messages -- Newest posted Friday, 7 April 2000, at 2:57 p.m.

Epoxy Filler
Johnnie McNeely -- Wednesday, 5 April 2000, at 9:48 p.m.
13 messages -- Newest posted Friday, 7 April 2000, at 5:29 p.m.

how do you design a stitch and glue kayak
Darren Neff -- Wednesday, 5 April 2000, at 10:04 p.m.
7 messages -- Newest posted Thursday, 6 April 2000, at 7:54 p.m.

Travelling to Chicago
Marcelo -- Thursday, 6 April 2000, at 8:07 a.m.
5 messages -- Newest posted Monday, 10 April 2000, at 12:48 p.m.

East System vs. West System Epoxy
Rick Mitchell -- Thursday, 6 April 2000, at 12:40 p.m.
3 messages -- Newest posted Friday, 7 April 2000, at 6:27 p.m.

Varnish Question
Larry Thompson -- Thursday, 6 April 2000, at 1:38 p.m.
9 messages -- Newest posted Sunday, 9 April 2000, at 5:11 p.m.

Car Top carriers
Derek -- Thursday, 6 April 2000, at 1:43 p.m.
29 messages -- Newest posted Wednesday, 12 April 2000, at 10:56 p.m.

How to dye pants red???
Sandy Garrett -- Thursday, 6 April 2000, at 6:48 p.m.
6 messages -- Newest posted Thursday, 6 April 2000, at 9:35 p.m.

Web site done
John Michne -- Thursday, 6 April 2000, at 8:36 p.m.
5 messages -- Newest posted Friday, 7 April 2000, at 5:25 p.m.

Bulkheads
Tim -- Thursday, 6 April 2000, at 8:46 p.m.
9 messages -- Newest posted Friday, 7 April 2000, at 10:35 a.m.

Canvas Canoe
Franco Sotgiu -- Friday, 7 April 2000, at 3:08 a.m.
4 messages -- Newest posted Saturday, 8 April 2000, at 10:12 a.m.

Rub it in, rub it in.
Dale Frolander -- Friday, 7 April 2000, at 4:45 a.m.
13 messages -- Newest posted Saturday, 8 April 2000, at 3:29 p.m.

Bungee/webbing sources
Terry -- Friday, 7 April 2000, at 12:58 p.m.
6 messages -- Newest posted Sunday, 9 April 2000, at 9:01 p.m.

Has anyone built a Great Auk 14?
Brian Nystrom -- Friday, 7 April 2000, at 6:24 p.m.
1 message

R.O. Sanders
Dennis -- Friday, 7 April 2000, at 8:46 p.m.
10 messages -- Newest posted Saturday, 8 April 2000, at 9:23 a.m.

Spidey
Jason -- Friday, 7 April 2000, at 9:53 p.m.
2 messages -- Newest posted Friday, 7 April 2000, at 10:57 p.m.

door skins
roddy -- Saturday, 8 April 2000, at 12:10 a.m.
4 messages -- Newest posted Sunday, 9 April 2000, at 1:36 p.m.

Started a Great Auk
Simon -- Saturday, 8 April 2000, at 5:13 a.m.
4 messages -- Newest posted Sunday, 9 April 2000, at 3:59 a.m.

question for Ross
Jay Roberts -- Saturday, 8 April 2000, at 9:26 a.m.
3 messages -- Newest posted Monday, 10 April 2000, at 11:30 p.m.

Great Lakes Small Craft Symposium 3
Gerald McQuinn -- Saturday, 8 April 2000, at 1:01 p.m.
1 message

Re: Free ...
Ross Leidy -- Saturday, 8 April 2000, at 3:37 p.m.
1 message

Kayak outrigger hulls
Dana Jones -- Saturday, 8 April 2000, at 3:58 p.m.
4 messages -- Newest posted Friday, 14 April 2000, at 10:28 a.m.

Sligthly off topic: Building a Chris C runabout
Marcelo -- Saturday, 8 April 2000, at 4:04 p.m.
7 messages -- Newest posted Monday, 10 April 2000, at 2:48 p.m.

Anyone here build a Panache?
Mark R -- Saturday, 8 April 2000, at 6:14 p.m.
2 messages -- Newest posted Saturday, 8 April 2000, at 7:21 p.m.

Flush Rigging & Laminating Paper (scan)
Spidey -- Saturday, 8 April 2000, at 6:52 p.m.
1 message

Re: Interpretation needed
Dean Trexel -- Saturday, 8 April 2000, at 8:34 p.m.
2 messages -- Newest posted Sunday, 9 April 2000, at 6:01 p.m.

Re: Bungee/webbing sources...and VELCRO
Dean Trexel -- Saturday, 8 April 2000, at 8:53 p.m.
1 message

cloth
john mayer -- Saturday, 8 April 2000, at 9:06 p.m.
2 messages -- Newest posted Sunday, 9 April 2000, at 10:18 a.m.

Thanks and a question for George
Brian Nystrom -- Sunday, 9 April 2000, at 10:41 a.m.
3 messages -- Newest posted Sunday, 9 April 2000, at 10:47 p.m.

Stapleless construction of Wee Lassie
Walter H. Klaus -- Sunday, 9 April 2000, at 2:51 p.m.
2 messages -- Newest posted Sunday, 9 April 2000, at 4:44 p.m.

stitch and glue
John Gardiner -- Sunday, 9 April 2000, at 3:34 p.m.
1 message

Re: Wow - It was easy to build! (Photo)
Spidey -- Sunday, 9 April 2000, at 7:31 p.m.
2 messages -- Newest posted Sunday, 9 April 2000, at 9:35 p.m.

Compass for Arctic Tern
Fritz OConnor -- Sunday, 9 April 2000, at 8:16 p.m.
9 messages -- Newest posted Tuesday, 11 April 2000, at 6:06 a.m.

project idea... will it work?
David Blodgett -- Sunday, 9 April 2000, at 9:25 p.m.
8 messages -- Newest posted Tuesday, 11 April 2000, at 12:07 p.m.

Deck Construction Started
Spidey -- Sunday, 9 April 2000, at 9:57 p.m.
2 messages -- Newest posted Monday, 10 April 2000, at 2:24 a.m.

pvc skins
Paul Raymond -- Sunday, 9 April 2000, at 10:26 p.m.
7 messages -- Newest posted Thursday, 13 April 2000, at 12:24 a.m.

Kayak Building Classes
Cindy Farber -- Sunday, 9 April 2000, at 10:58 p.m.
2 messages -- Newest posted Monday, 10 April 2000, at 2:11 a.m.

Re: heads
lee -- Monday, 10 April 2000, at 12:29 a.m.
1 message

Free CLC Cape Charles Kayak
Steve Gersh -- Monday, 10 April 2000, at 2:01 a.m.
7 messages -- Newest posted Saturday, 15 April 2000, at 8:45 p.m.

Re: Problem Solved !!
Ian Johnston -- Monday, 10 April 2000, at 3:59 a.m.
3 messages -- Newest posted Tuesday, 11 April 2000, at 12:58 p.m.

Re: weak
Dean Trexel -- Monday, 10 April 2000, at 7:25 a.m.
1 message

OK...but how about some specifics?
Brian Nystrom -- Monday, 10 April 2000, at 8:01 a.m.
2 messages -- Newest posted Monday, 10 April 2000, at 12:28 p.m.

Free ...
Mike R. -- Monday, 10 April 2000, at 1:23 p.m.
3 messages -- Newest posted Tuesday, 11 April 2000, at 12:28 p.m.

Custom seats
Derek -- Monday, 10 April 2000, at 3:07 p.m.
3 messages -- Newest posted Monday, 10 April 2000, at 9:42 p.m.

unfolding stitch 'n glue kayak drawings
Darren Neff -- Monday, 10 April 2000, at 3:31 p.m.
6 messages -- Newest posted Tuesday, 11 April 2000, at 12:11 p.m.

Strip Design Tool #2
mike allen ---} -- Monday, 10 April 2000, at 4:26 p.m.
1 message

Thwart designs?
Travis -- Monday, 10 April 2000, at 6:20 p.m.
8 messages -- Newest posted Monday, 10 April 2000, at 9:04 p.m.

Source for cedar in Los Angeles?
Ed Winterhalter -- Monday, 10 April 2000, at 6:50 p.m.
2 messages -- Newest posted Monday, 10 April 2000, at 9:12 p.m.

Re: Whooooaaaaa, George . . .
Spidey -- Monday, 10 April 2000, at 8:21 p.m.
3 messages -- Newest posted Tuesday, 11 April 2000, at 12:37 a.m.

Re: to what purpose
lee -- Monday, 10 April 2000, at 10:01 p.m.
1 message

Re: scaling
lee -- Monday, 10 April 2000, at 10:39 p.m.
1 message

Re: Sorry for popping off . . .
Spidey -- Tuesday, 11 April 2000, at 12:23 a.m.
2 messages -- Newest posted Tuesday, 11 April 2000, at 2:04 a.m.

Can you use Cloth for covering?
blaine -- Tuesday, 11 April 2000, at 9:06 a.m.
6 messages -- Newest posted Thursday, 11 May 2000, at 12:47 p.m.

Epoxy and Silicone
Mike Hanks -- Tuesday, 11 April 2000, at 9:49 a.m.
6 messages -- Newest posted Thursday, 13 April 2000, at 2:35 p.m.

How 2 build a ten ft kayak
Hank Rodgers -- Tuesday, 11 April 2000, at 10:17 a.m.
4 messages -- Newest posted Wednesday, 12 April 2000, at 11:31 a.m.

Deck Fittings Decisions
Fritz OConnor -- Tuesday, 11 April 2000, at 11:03 a.m.
7 messages -- Newest posted Tuesday, 11 April 2000, at 1:34 p.m.

Re: Please don't put words in others mouth
Nick Schade - Guillemot Kayaks -- Tuesday, 11 April 2000, at 11:45 a.m.
1 message

how to get rid of wax.
Derek -- Tuesday, 11 April 2000, at 12:32 p.m.
13 messages -- Newest posted Wednesday, 12 April 2000, at 1:02 p.m.

How many hours?
R. Sweeney -- Tuesday, 11 April 2000, at 1:46 p.m.
17 messages -- Newest posted Thursday, 13 April 2000, at 9:57 p.m.

Mix glass/epoxy
Hans Friedel -- Tuesday, 11 April 2000, at 3:16 p.m.
4 messages -- Newest posted Wednesday, 12 April 2000, at 8:40 a.m.

How long?
DJ Gaker -- Tuesday, 11 April 2000, at 3:59 p.m.
9 messages -- Newest posted Tuesday, 18 April 2000, at 6:10 p.m.

Re: Free ...
Vaclav -- Tuesday, 11 April 2000, at 4:50 p.m.
1 message

putting a project on hold...
Walter S. -- Tuesday, 11 April 2000, at 5:28 p.m.
6 messages -- Newest posted Tuesday, 11 April 2000, at 10:32 p.m.

stain
john mayer -- Tuesday, 11 April 2000, at 6:03 p.m.
3 messages -- Newest posted Thursday, 13 April 2000, at 1:54 a.m.

The Key to stapless construction / pic
Rick thomas -- Tuesday, 11 April 2000, at 7:21 p.m.
23 messages -- Newest posted Friday, 14 April 2000, at 6:28 a.m.

A new angle on Scary Sharp
Dave Houser -- Tuesday, 11 April 2000, at 9:49 p.m.
4 messages -- Newest posted Thursday, 13 April 2000, at 12:55 a.m.

Mineral Spirits?
Dale Frolander -- Tuesday, 11 April 2000, at 10:24 p.m.
8 messages -- Newest posted Thursday, 13 April 2000, at 1:18 a.m.

Poor cure with epoxy
Roger Nuffer -- Tuesday, 11 April 2000, at 10:56 p.m.
9 messages -- Newest posted Wednesday, 12 April 2000, at 10:24 p.m.

Whitewater kayaks
Hunter -- Wednesday, 12 April 2000, at 12:46 p.m.
2 messages -- Newest posted Thursday, 13 April 2000, at 5:40 p.m.

First Form. HELP
Wayne P. -- Wednesday, 12 April 2000, at 12:55 p.m.
2 messages -- Newest posted Wednesday, 12 April 2000, at 2:20 p.m.

Wood Veneer Sources? Building Ross Leidy Cradles
Tim Stough -- Wednesday, 12 April 2000, at 3:21 p.m.
7 messages -- Newest posted Thursday, 13 April 2000, at 7:33 a.m.

Boat Finishing Questions (paint, varnish, etc.)
Tim Stough -- Wednesday, 12 April 2000, at 6:07 p.m.
2 messages -- Newest posted Saturday, 15 April 2000, at 6:59 a.m.

taping inside seam of strip kayak
dave ingham -- Wednesday, 12 April 2000, at 6:46 p.m.
1 message

Radial Arm Saw Hint
Spidey -- Wednesday, 12 April 2000, at 11:03 p.m.
2 messages -- Newest posted Thursday, 13 April 2000, at 9:43 a.m.

how long before sanding?
Dean Trexel -- Thursday, 13 April 2000, at 7:43 a.m.
4 messages -- Newest posted Thursday, 13 April 2000, at 1:15 p.m.

Defense of George's methods - examples
Dean Trexel -- Thursday, 13 April 2000, at 10:24 a.m.
18 messages -- Newest posted Monday, 17 April 2000, at 10:20 a.m.

Guillemot Coaming--I need a measurement
Shawn Baker -- Thursday, 13 April 2000, at 11:02 a.m.
7 messages -- Newest posted Friday, 14 April 2000, at 5:59 a.m.

Silicone, Epoxy, and Plastic Wrap
Mike Hanks -- Thursday, 13 April 2000, at 4:02 p.m.
10 messages -- Newest posted Tuesday, 18 April 2000, at 11:46 a.m.

Re: Euler-Stokes equations
Spidey -- Thursday, 13 April 2000, at 7:37 p.m.
2 messages -- Newest posted Thursday, 13 April 2000, at 10:18 p.m.

ROS vs Sheet Sanders
Paul Willliams -- Thursday, 13 April 2000, at 8:35 p.m.
9 messages -- Newest posted Friday, 14 April 2000, at 11:21 p.m.

What do yall think of this layup?
David Blodgett -- Thursday, 13 April 2000, at 10:03 p.m.
9 messages -- Newest posted Saturday, 15 April 2000, at 2:44 p.m.

Cool yack rack for pickups
Tim -- Thursday, 13 April 2000, at 11:01 p.m.
4 messages -- Newest posted Tuesday, 18 April 2000, at 11:05 a.m.

need help with alligators risk info
erez -- Friday, 14 April 2000, at 12:16 a.m.
18 messages -- Newest posted Wednesday, 19 April 2000, at 2:34 p.m.

Re: Arguments
Don Beale -- Friday, 14 April 2000, at 1:08 a.m.
1 message

Mike Hanks' Plywood Walrus Pics
Curt Hanks -- Friday, 14 April 2000, at 1:49 a.m.
2 messages -- Newest posted Friday, 14 April 2000, at 11:18 p.m.

Here's a REAL argument (off off off topic)
David Dick -- Friday, 14 April 2000, at 7:18 a.m.
6 messages -- Newest posted Monday, 17 April 2000, at 8:39 p.m.

Wooden Boat Show
Jack Martin -- Friday, 14 April 2000, at 10:03 a.m.
4 messages -- Newest posted Friday, 14 April 2000, at 12:38 p.m.

Drilling holes in a perfectly good kayak
Ross Leidy -- Friday, 14 April 2000, at 3:29 p.m.
11 messages -- Newest posted Saturday, 15 April 2000, at 12:55 a.m.

Re: Arguments
Jay Roberts -- Friday, 14 April 2000, at 5:56 p.m.
1 message

Re: What do yall think of this layup?
David Blodgett -- Friday, 14 April 2000, at 7:27 p.m.
1 message

Re: Euler-Stokes equations
Spidey -- Friday, 14 April 2000, at 7:43 p.m.
1 message

Re: typos?
Spidey -- Friday, 14 April 2000, at 8:02 p.m.
14 messages -- Newest posted Monday, 17 April 2000, at 9:28 a.m.

Shear seam fitup
Kent Leboutillier -- Friday, 14 April 2000, at 8:18 p.m.
1 message

Aaarrgh! $19000 and one tie-down!
Dean Trexel -- Friday, 14 April 2000, at 9:07 p.m.
14 messages -- Newest posted Tuesday, 2 May 2000, at 7:05 p.m.

RAKA opinions
Dean Trexel -- Friday, 14 April 2000, at 9:35 p.m.
8 messages -- Newest posted Sunday, 16 April 2000, at 10:11 a.m.

good ol' George - what a piece of work
Dean Trexel -- Friday, 14 April 2000, at 10:24 p.m.
3 messages -- Newest posted Saturday, 15 April 2000, at 9:48 p.m.

Re: most recent appllication ???
Spidey -- Friday, 14 April 2000, at 11:54 p.m.
1 message

Epoxy sensitive
Bill -- Saturday, 15 April 2000, at 12:18 a.m.
3 messages -- Newest posted Tuesday, 18 April 2000, at 7:58 a.m.

It's all about sharing.
Dale Frolander -- Saturday, 15 April 2000, at 3:08 a.m.
1 message

Re: Kayak Building Prerequisite: English 101?
Brian Wegener -- Saturday, 15 April 2000, at 10:43 a.m.
2 messages -- Newest posted Saturday, 15 April 2000, at 1:26 p.m.

Deck fitting - photo
Ross Leidy -- Saturday, 15 April 2000, at 3:59 p.m.
21 messages -- Newest posted Wednesday, 19 April 2000, at 9:47 p.m.

Hey Paul Williams - Addt'l info on syringe needles
Scott -- Saturday, 15 April 2000, at 4:01 p.m.
4 messages -- Newest posted Wednesday, 19 April 2000, at 3:09 p.m.

Re: Defense of George's methods - examples
Nolan -- Saturday, 15 April 2000, at 8:42 p.m.
1 message

Re: Just have to ask ...
Nolan -- Saturday, 15 April 2000, at 8:44 p.m.
1 message

Re: impeccable spelling - wrong word!
Dean Trexel -- Saturday, 15 April 2000, at 10:06 p.m.
1 message

Re: Just have to ask ...
Nolan -- Saturday, 15 April 2000, at 10:43 p.m.
1 message

colored fillets?
Johnnie -- Sunday, 16 April 2000, at 12:04 a.m.
3 messages -- Newest posted Monday, 17 April 2000, at 3:46 p.m.

wood species delaminating from apoxy,
Rick Clements -- Sunday, 16 April 2000, at 2:53 a.m.
14 messages -- Newest posted Wednesday, 19 April 2000, at 2:58 p.m.

How much sanding??
Walter H. Klaus -- Sunday, 16 April 2000, at 7:51 a.m.
6 messages -- Newest posted Tuesday, 18 April 2000, at 2:04 p.m.

Chris Choi's New Outer Islander
Nick Schade - Guillemot Kayaks -- Sunday, 16 April 2000, at 5:55 p.m.
4 messages -- Newest posted Monday, 17 April 2000, at 5:55 a.m.

Message Threader
Nick Pinson -- Sunday, 16 April 2000, at 6:00 p.m.
1 message

83 leetle blocks
Dean Trexel -- Sunday, 16 April 2000, at 10:51 p.m.
4 messages -- Newest posted Monday, 17 April 2000, at 8:09 a.m.

Tern Builders - advice please
Mike -- Monday, 17 April 2000, at 12:22 a.m.
9 messages -- Newest posted Tuesday, 18 April 2000, at 10:52 a.m.

Laminated Ash deck fittings
Ross Leidy -- Monday, 17 April 2000, at 9:10 a.m.
18 messages -- Newest posted Wednesday, 19 April 2000, at 1:25 p.m.

Minnesota-Twin Cities
mike -- Monday, 17 April 2000, at 12:22 p.m.
6 messages -- Newest posted Monday, 17 April 2000, at 4:39 p.m.

Time to Build? - Wee Lassie
Greg Hicks -- Monday, 17 April 2000, at 12:35 p.m.
6 messages -- Newest posted Tuesday, 18 April 2000, at 10:39 a.m.

Another one hits the water!!
Ed Coon -- Monday, 17 April 2000, at 1:14 p.m.
1 message

Prepping for Varnish
Chuck -- Monday, 17 April 2000, at 2:12 p.m.
3 messages -- Newest posted Monday, 17 April 2000, at 5:18 p.m.

1000 island destinations help???
pete czerpak -- Monday, 17 April 2000, at 2:58 p.m.
5 messages -- Newest posted Tuesday, 18 April 2000, at 8:39 a.m.

Row/Paddle
Kenny B -- Monday, 17 April 2000, at 7:32 p.m.
6 messages -- Newest posted Monday, 24 April 2000, at 5:34 a.m.

fiberglassing & portholes
AMANDA -- Monday, 17 April 2000, at 7:37 p.m.
2 messages -- Newest posted Monday, 17 April 2000, at 8:09 p.m.

Alternative Stapleless?? (New Product)
Spidey -- Monday, 17 April 2000, at 9:30 p.m.
4 messages -- Newest posted Tuesday, 18 April 2000, at 1:58 p.m.

How do I clean clay marks off boat?
David Walker -- Tuesday, 18 April 2000, at 1:09 a.m.
9 messages -- Newest posted Wednesday, 19 April 2000, at 1:54 p.m.

Nick, are you messin' round again!!
Ian Johnston -- Tuesday, 18 April 2000, at 2:02 a.m.
13 messages -- Newest posted Thursday, 20 April 2000, at 6:12 p.m.

settings,paddles,symposium,no-see-ums
lee -- Tuesday, 18 April 2000, at 8:36 a.m.
10 messages -- Newest posted Wednesday, 19 April 2000, at 6:17 p.m.

Epoxy sensitization
John Michne -- Tuesday, 18 April 2000, at 9:25 a.m.
14 messages -- Newest posted Wednesday, 19 April 2000, at 1:46 p.m.

Re: What do yall think of this layup?
Jack Valtrades -- Tuesday, 18 April 2000, at 10:15 a.m.
1 message

narrowing b&c strips
John Waddington -- Tuesday, 18 April 2000, at 1:54 p.m.
5 messages -- Newest posted Monday, 24 April 2000, at 5:17 a.m.

Re: Review v. Directed Question
Ross Leidy -- Tuesday, 18 April 2000, at 4:40 p.m.
1 message

Spring Run Review??
Nick Pinson -- Tuesday, 18 April 2000, at 5:26 p.m.
13 messages -- Newest posted Friday, 21 April 2000, at 8:38 p.m.

Re: Review v. Directed Question
Dean Trexel -- Tuesday, 18 April 2000, at 5:51 p.m.
1 message

Re: Review v. Directed Question
Dennis -- Tuesday, 18 April 2000, at 6:52 p.m.
1 message

Re: Mmmmmpphhhh! *NM*
Spidey -- Tuesday, 18 April 2000, at 7:19 p.m.
1 message

Re: Review v. Directed Question
Jay Roberts -- Tuesday, 18 April 2000, at 10:01 p.m.
1 message

George, is that your best work?
Bruce -- Tuesday, 18 April 2000, at 10:42 p.m.
1 message

Re: Review v. Directed Question
Larry Thompson -- Tuesday, 18 April 2000, at 11:16 p.m.
1 message

Merganser
Bill H. -- Tuesday, 18 April 2000, at 11:22 p.m.
5 messages -- Newest posted Wednesday, 19 April 2000, at 10:10 p.m.

Re:off topic
lee -- Wednesday, 19 April 2000, at 4:32 a.m.
4 messages -- Newest posted Wednesday, 19 April 2000, at 6:14 p.m.

Fiberglass Specs.
Scott -- Wednesday, 19 April 2000, at 4:40 a.m.
3 messages -- Newest posted Wednesday, 19 April 2000, at 1:20 p.m.

Re: off topic, wow, weekend warrior analogies?
lee -- Wednesday, 19 April 2000, at 5:19 a.m.
1 message

bad kayak building karma- no wood,glass delivery y
pete czerpak -- Wednesday, 19 April 2000, at 8:08 a.m.
16 messages -- Newest posted Friday, 21 April 2000, at 10:30 p.m.

wood for stripper (boat) in NE
Jason W. -- Wednesday, 19 April 2000, at 9:22 a.m.
6 messages -- Newest posted Thursday, 20 April 2000, at 3:29 a.m.

Airbrushing
Paul -- Wednesday, 19 April 2000, at 9:30 a.m.
4 messages -- Newest posted Thursday, 20 April 2000, at 2:24 p.m.

Marine ply for hull
Bailey -- Wednesday, 19 April 2000, at 10:05 a.m.
6 messages -- Newest posted Wednesday, 19 April 2000, at 9:40 p.m.

Engineering trade offs
Nolan -- Wednesday, 19 April 2000, at 10:45 a.m.
1 message

Not a flame George, just a question...
Mike T. -- Wednesday, 19 April 2000, at 12:27 p.m.
4 messages -- Newest posted Wednesday, 19 April 2000, at 1:57 p.m.

Fiberglass Part II
Scott -- Wednesday, 19 April 2000, at 1:22 p.m.
5 messages -- Newest posted Wednesday, 19 April 2000, at 3:45 p.m.

Okoume vs. other woods
Brian Nystrom -- Wednesday, 19 April 2000, at 2:52 p.m.
2 messages -- Newest posted Wednesday, 19 April 2000, at 5:00 p.m.

Expedition Single & weathercocking
Dave Colant -- Wednesday, 19 April 2000, at 3:52 p.m.
13 messages -- Newest posted Friday, 21 April 2000, at 9:58 a.m.

Fiberglass: 4oz. v 6oz.
Scott -- Wednesday, 19 April 2000, at 7:07 p.m.
3 messages -- Newest posted Thursday, 20 April 2000, at 8:31 a.m.

Choosing a seat
Bruce -- Wednesday, 19 April 2000, at 10:26 p.m.
8 messages -- Newest posted Thursday, 20 April 2000, at 8:21 a.m.

Prospecting
Ryan Arnold -- Thursday, 20 April 2000, at 12:45 a.m.
20 messages -- Newest posted Monday, 24 April 2000, at 4:58 a.m.

help with spray skirt for coho
erez -- Thursday, 20 April 2000, at 1:43 a.m.
6 messages -- Newest posted Thursday, 20 April 2000, at 9:03 p.m.

Three Cheers for MAS
Tim -- Thursday, 20 April 2000, at 2:29 a.m.
2 messages -- Newest posted Thursday, 20 April 2000, at 10:30 p.m.

Smaller loop deck fitting
Ross Leidy -- Thursday, 20 April 2000, at 9:01 a.m.
2 messages -- Newest posted Thursday, 20 April 2000, at 12:04 p.m.

Safety, two points
Nolan -- Thursday, 20 April 2000, at 9:32 a.m.
98 messages -- Newest posted Monday, 24 April 2000, at 5:50 p.m.

the Guillemot's handling characteristics??
Hank -- Thursday, 20 April 2000, at 10:53 a.m.
21 messages -- Newest posted Tuesday, 25 April 2000, at 12:14 a.m.

Portaging is a Must : My pals are my family.
Ryan Arnold -- Thursday, 20 April 2000, at 4:44 p.m.
1 message

adjustable foot braces
Fred Williams -- Thursday, 20 April 2000, at 5:20 p.m.
12 messages -- Newest posted Saturday, 29 April 2000, at 9:10 a.m.

Kayaking Safety
Bruce -- Thursday, 20 April 2000, at 7:12 p.m.
21 messages -- Newest posted Monday, 24 April 2000, at 1:29 p.m.

Re: Portage Yoke
Ken Sutherland -- Friday, 21 April 2000, at 7:58 a.m.
1 message

NEED HELP ON HOW TO MAKE A LIGHT CLONE
LEW FOX -- Friday, 21 April 2000, at 10:26 a.m.
4 messages -- Newest posted Sunday, 23 April 2000, at 7:45 p.m.

planing
Aime Oteman -- Friday, 21 April 2000, at 4:40 p.m.
3 messages -- Newest posted Monday, 24 April 2000, at 4:19 a.m.

checkering
Allston Crawford -- Friday, 21 April 2000, at 4:45 p.m.
4 messages -- Newest posted Wednesday, 26 April 2000, at 7:17 a.m.

Advice on northern cedar
Mark R. -- Friday, 21 April 2000, at 6:14 p.m.
3 messages -- Newest posted Monday, 24 April 2000, at 4:10 a.m.

Varnish prep question: Thanks in advance
larry -- Friday, 21 April 2000, at 10:35 p.m.
2 messages -- Newest posted Saturday, 22 April 2000, at 12:21 p.m.

Steamy questions
Simon -- Saturday, 22 April 2000, at 6:02 a.m.
5 messages -- Newest posted Sunday, 23 April 2000, at 11:34 p.m.

Kayak trailer *Pic*
Matt -- Saturday, 22 April 2000, at 9:05 a.m.
1 message

How do you guys shape paddle blades?
tim -- Saturday, 22 April 2000, at 3:44 p.m.
11 messages -- Newest posted Tuesday, 25 April 2000, at 9:23 p.m.

Varnish amount
Travis -- Saturday, 22 April 2000, at 8:56 p.m.
4 messages -- Newest posted Monday, 24 April 2000, at 9:56 a.m.

questions about BWCA & kayak carts
Erez -- Saturday, 22 April 2000, at 10:22 p.m.
7 messages -- Newest posted Friday, 28 April 2000, at 1:42 p.m.

rehd, what are we doing on sunday ?
Erez -- Saturday, 22 April 2000, at 10:31 p.m.
4 messages -- Newest posted Sunday, 23 April 2000, at 3:12 a.m.

Cedar strip kayak on ebay
Dale Frolander -- Sunday, 23 April 2000, at 2:05 a.m.
1 message

Dale - Easter Massacre - 3g or Building Board?
Spidey -- Sunday, 23 April 2000, at 2:19 a.m.
5 messages -- Newest posted Sunday, 23 April 2000, at 12:08 p.m.

Wavy plywood problem
gary b. -- Sunday, 23 April 2000, at 10:58 a.m.
9 messages -- Newest posted Tuesday, 25 April 2000, at 11:07 p.m.

Re: I have been away for a bit...
Spidey -- Sunday, 23 April 2000, at 11:21 a.m.
1 message

Level Strongback
B J -- Sunday, 23 April 2000, at 11:23 a.m.
1 message

Epoxy - RAKA/SYS3/WEST etc...
k ingersoll -- Sunday, 23 April 2000, at 12:43 p.m.
4 messages -- Newest posted Monday, 24 April 2000, at 8:59 a.m.

Gunwale attachment settled?
Travis -- Sunday, 23 April 2000, at 1:17 p.m.
1 message

Re: point?
lee -- Sunday, 23 April 2000, at 1:25 p.m.
1 message

Re: not long enough...
Dean Trexel -- Sunday, 23 April 2000, at 3:03 p.m.
1 message

Re: I have been away for a bit...
Dean Trexel -- Sunday, 23 April 2000, at 3:26 p.m.
1 message

Re: Just had too look ...Twice !!
Rehd -- Sunday, 23 April 2000, at 5:02 p.m.
2 messages -- Newest posted Sunday, 23 April 2000, at 5:15 p.m.

Re: I have been away for a bit...
henry paine -- Sunday, 23 April 2000, at 7:35 p.m.
2 messages -- Newest posted Monday, 24 April 2000, at 5:59 a.m.

Proper gluing technique- OT
Bruce -- Sunday, 23 April 2000, at 7:58 p.m.
12 messages -- Newest posted Tuesday, 25 April 2000, at 12:25 a.m.

Ever scaled down a design?
Jason A. -- Sunday, 23 April 2000, at 8:23 p.m.
6 messages -- Newest posted Saturday, 29 April 2000, at 9:26 a.m.

Guillemot rudder
Warren -- Sunday, 23 April 2000, at 8:30 p.m.
8 messages -- Newest posted Thursday, 27 April 2000, at 9:25 p.m.

Traditional
Eric -- Sunday, 23 April 2000, at 9:20 p.m.
12 messages -- Newest posted Friday, 28 April 2000, at 5:55 p.m.

Any rib-benders in here?
timfish -- Sunday, 23 April 2000, at 10:16 p.m.
6 messages -- Newest posted Tuesday, 25 April 2000, at 2:39 p.m.

Timely varnish question!
Lew Crenshaw -- Monday, 24 April 2000, at 10:39 a.m.
3 messages -- Newest posted Monday, 24 April 2000, at 10:49 a.m.

polyurathane glue for kayak building?
Kristopher -- Monday, 24 April 2000, at 12:41 p.m.
6 messages -- Newest posted Tuesday, 25 April 2000, at 8:26 a.m.

Fiberglass specs
Don Hummels -- Monday, 24 April 2000, at 4:28 p.m.
1 message

A Kayak in a Weekend *Pic*
BillS -- Monday, 24 April 2000, at 5:06 p.m.
3 messages -- Newest posted Tuesday, 25 April 2000, at 12:14 p.m.

Supporting George
Marcelo -- Monday, 24 April 2000, at 5:37 p.m.
2 messages -- Newest posted Tuesday, 25 April 2000, at 5:59 a.m.

Building a long kayak *Pic*
Nick Schade - Guillemot Kayaks -- Monday, 24 April 2000, at 5:43 p.m.
6 messages -- Newest posted Thursday, 27 April 2000, at 11:39 a.m.

Re: Just had too look ...Twice !!
lee -- Monday, 24 April 2000, at 10:04 p.m.
1 message

I've got a dilemna
David Blodgett -- Monday, 24 April 2000, at 10:23 p.m.
24 messages -- Newest posted Thursday, 27 April 2000, at 1:36 p.m.

Guillemot cockpit coaming lip height
Ed Walshe - Dublin Ireland -- Tuesday, 25 April 2000, at 6:28 a.m.
13 messages -- Newest posted Wednesday, 26 April 2000, at 12:00 p.m.

Great tips for joining top to bottom
Brian B -- Tuesday, 25 April 2000, at 8:44 a.m.
3 messages -- Newest posted Tuesday, 25 April 2000, at 11:01 p.m.

Posting a PIC if you have no URL
Marcelo -- Tuesday, 25 April 2000, at 9:23 a.m.
3 messages -- Newest posted Wednesday, 26 April 2000, at 12:19 a.m.

Plywood Bulkheads
DaveW -- Tuesday, 25 April 2000, at 6:20 p.m.
13 messages -- Newest posted Sunday, 30 April 2000, at 12:51 p.m.

Tall Farmer John Wetsuits?
G. Snapp -- Tuesday, 25 April 2000, at 7:40 p.m.
14 messages -- Newest posted Friday, 28 April 2000, at 11:52 a.m.

Product called 303 Anybody use it?
Bill Heuser -- Tuesday, 25 April 2000, at 10:04 p.m.
7 messages -- Newest posted Thursday, 27 April 2000, at 1:27 p.m.

glues for stick and glue
Kristopher -- Wednesday, 26 April 2000, at 3:01 a.m.
3 messages -- Newest posted Wednesday, 26 April 2000, at 11:19 p.m.

Doubled Progress update.
Derek -- Wednesday, 26 April 2000, at 11:04 a.m.
8 messages -- Newest posted Thursday, 27 April 2000, at 9:26 a.m.

central NY plywood source??
pete czerpak -- Wednesday, 26 April 2000, at 11:45 a.m.
4 messages -- Newest posted Wednesday, 26 April 2000, at 9:19 p.m.

Varnish vs. Polyester Resin
Doyle -- Wednesday, 26 April 2000, at 1:09 p.m.
1 message

Sources for Z-Spar Flagship
Chuck -- Wednesday, 26 April 2000, at 1:35 p.m.
7 messages -- Newest posted Wednesday, 26 April 2000, at 8:09 p.m.

Reinforcing Greenland paddle ends
Spencer A. Smith -- Wednesday, 26 April 2000, at 9:21 p.m.
4 messages -- Newest posted Sunday, 30 April 2000, at 12:40 p.m.

I think I have built a tank
Brian B -- Thursday, 27 April 2000, at 11:31 a.m.
22 messages -- Newest posted Sunday, 30 April 2000, at 10:31 p.m.

Another Newbie question
Ed Gandorf -- Thursday, 27 April 2000, at 1:58 p.m.
4 messages -- Newest posted Friday, 28 April 2000, at 3:18 p.m.

surf kayaks
thomas andrews -- Thursday, 27 April 2000, at 8:14 p.m.
1 message

Router bits
Michel Daneault -- Thursday, 27 April 2000, at 10:08 p.m.
6 messages -- Newest posted Friday, 28 April 2000, at 3:04 p.m.

Titebond II wood glue
Chuck W. -- Friday, 28 April 2000, at 12:18 p.m.
5 messages -- Newest posted Monday, 1 May 2000, at 3:05 p.m.

Fixing a scratch
Don Beale -- Friday, 28 April 2000, at 1:14 p.m.
7 messages -- Newest posted Sunday, 30 April 2000, at 10:20 a.m.

Oar length for small wooden boats
Lisle Posey -- Friday, 28 April 2000, at 2:25 p.m.
2 messages -- Newest posted Friday, 28 April 2000, at 11:22 p.m.

posting photos through free e-mail service
Paul G. Jacobson -- Saturday, 29 April 2000, at 5:54 a.m.
7 messages -- Newest posted Tuesday, 2 May 2000, at 7:08 a.m.

Footbrace Mounting
Dennis -- Saturday, 29 April 2000, at 11:10 a.m.
14 messages -- Newest posted Sunday, 7 May 2000, at 11:04 p.m.

1-part polyurethane varnish
Dean Trexel -- Saturday, 29 April 2000, at 2:06 p.m.
2 messages -- Newest posted Thursday, 4 May 2000, at 9:04 p.m.

Miscellaneous questions
Nancy -- Saturday, 29 April 2000, at 3:25 p.m.
7 messages -- Newest posted Friday, 5 May 2000, at 6:06 p.m.

done sanding before varnishing?
Tom Schwartzman -- Saturday, 29 April 2000, at 3:56 p.m.
2 messages -- Newest posted Saturday, 29 April 2000, at 4:16 p.m.

Great Lakes Small Craft Symosium 3
Gerald McQuinn -- Saturday, 29 April 2000, at 5:28 p.m.
1 message

can it be done?
David Blodgett -- Sunday, 30 April 2000, at 12:06 a.m.
20 messages -- Newest posted Wednesday, 3 May 2000, at 9:32 p.m.

Slippery cockpit floor
Liz Leedham -- Sunday, 30 April 2000, at 9:36 a.m.
17 messages -- Newest posted Tuesday, 2 May 2000, at 10:24 p.m.

Photos of deck mounted footbrace *Pic*
Eric Schade (Shearwater Boats) -- Sunday, 30 April 2000, at 1:10 p.m.
1 message

Weathercocking and Knee Braces
David Bryson -- Sunday, 30 April 2000, at 5:17 p.m.
3 messages -- Newest posted Sunday, 30 April 2000, at 11:37 p.m.

Greenland Paddles
Nick Pinson -- Sunday, 30 April 2000, at 6:41 p.m.
12 messages -- Newest posted Tuesday, 2 May 2000, at 12:00 p.m.

Epoxy Thinner
Randy Ames -- Sunday, 30 April 2000, at 7:49 p.m.
16 messages -- Newest posted Friday, 5 May 2000, at 2:15 a.m.

THE TROPICALIZED BAIDARKA
mark c. williams -- Sunday, 30 April 2000, at 7:57 p.m.
1 message

Another (S&G) hits the water *Pic*
Dave Murphy -- Sunday, 30 April 2000, at 8:22 p.m.
7 messages -- Newest posted Monday, 1 May 2000, at 2:18 a.m.

Finally some picutures! *Pic*
Dean Trexel -- Sunday, 30 April 2000, at 9:36 p.m.
25 messages -- Newest posted Tuesday, 2 May 2000, at 12:46 p.m.

Substitue for rice paper.
Dale Frolander -- Monday, 1 May 2000, at 3:13 a.m.
24 messages -- Newest posted Thursday, 11 May 2000, at 10:14 p.m.

Geodesic Aerolite *Pic* *Pic*
David -- Monday, 1 May 2000, at 9:34 a.m.
3 messages -- Newest posted Monday, 1 May 2000, at 10:26 a.m.

Painting a plywood/canvas kayak
Gene Bowley -- Monday, 1 May 2000, at 1:26 p.m.
19 messages -- Newest posted Monday, 8 May 2000, at 12:24 a.m.

footpeg height
Dean Trexel -- Monday, 1 May 2000, at 3:03 p.m.
3 messages -- Newest posted Tuesday, 2 May 2000, at 8:10 a.m.

Building a Skin and Frame
Anne G -- Monday, 1 May 2000, at 5:16 p.m.
4 messages -- Newest posted Wednesday, 3 May 2000, at 11:19 p.m.

sealing bulkheads
craig -- Monday, 1 May 2000, at 5:16 p.m.
51 messages -- Newest posted Friday, 26 May 2000, at 10:47 a.m.

more pix - epoxying inner shear *Pic*
Dean Trexel -- Monday, 1 May 2000, at 9:07 p.m.
2 messages -- Newest posted Wednesday, 3 May 2000, at 11:58 p.m.

coaming riser *Pic*
Dean Trexel -- Monday, 1 May 2000, at 9:14 p.m.
1 message

artistic liberties *Pic*
Dean Trexel -- Monday, 1 May 2000, at 9:21 p.m.
1 message

coaming lip (out of order) *Pic*
Dean Trexel -- Monday, 1 May 2000, at 9:24 p.m.
3 messages -- Newest posted Tuesday, 2 May 2000, at 7:56 p.m.

foredeck *Pic*
Dean Trexel -- Monday, 1 May 2000, at 9:31 p.m.
2 messages -- Newest posted Tuesday, 2 May 2000, at 9:48 a.m.

aft deck *Pic*
Dean Trexel -- Monday, 1 May 2000, at 9:39 p.m.
7 messages -- Newest posted Wednesday, 3 May 2000, at 11:30 a.m.

Pore epoxy cure update: Pic Link
Roger Nuffer -- Tuesday, 2 May 2000, at 3:30 a.m.
1 message

Hollow loom Greenland paddle *Pic*
Kent LeBoutillier -- Tuesday, 2 May 2000, at 7:47 a.m.
3 messages -- Newest posted Tuesday, 2 May 2000, at 9:06 a.m.

Almost done! *Pic*
Kent LeBoutillier -- Tuesday, 2 May 2000, at 8:03 a.m.
13 messages -- Newest posted Wednesday, 3 May 2000, at 11:21 p.m.

merganser finally started- no pics though
pete czerpak -- Tuesday, 2 May 2000, at 12:02 p.m.
1 message

cockpit heights.
Wayne Prouty -- Tuesday, 2 May 2000, at 2:02 p.m.
3 messages -- Newest posted Wednesday, 3 May 2000, at 2:35 a.m.

Guillemot 18 almost ready for fiberglass *Pic*
Shawn B -- Tuesday, 2 May 2000, at 3:31 p.m.
13 messages -- Newest posted Thursday, 4 May 2000, at 4:45 p.m.

Expedition Single & weathercocking - Followup
Dave Colant -- Tuesday, 2 May 2000, at 4:56 p.m.
5 messages -- Newest posted Wednesday, 3 May 2000, at 10:53 a.m.

GPS users
Kent LeBoutillier -- Wednesday, 3 May 2000, at 6:15 a.m.
24 messages -- Newest posted Friday, 12 May 2000, at 1:49 p.m.

Spray Skirt
mike -- Wednesday, 3 May 2000, at 10:01 a.m.
1 message

boat turns left - NO MORE
David Walker -- Wednesday, 3 May 2000, at 7:09 p.m.
2 messages -- Newest posted Wednesday, 3 May 2000, at 7:37 p.m.

Many thanks
Spencer A. Smith -- Wednesday, 3 May 2000, at 8:12 p.m.
1 message

ROS on Stearates?
Doug -- Thursday, 4 May 2000, at 11:54 a.m.
14 messages -- Newest posted Saturday, 6 May 2000, at 11:34 a.m.

Sail, rudder (Keel?) ideas for colaspeable Kayak *Pic*
Gene Bowley -- Thursday, 4 May 2000, at 1:16 p.m.
3 messages -- Newest posted Thursday, 4 May 2000, at 4:22 p.m.

Wood-strip canoe: Splitting the wood ect. Advice?
Anne G -- Thursday, 4 May 2000, at 1:19 p.m.
5 messages -- Newest posted Friday, 5 May 2000, at 11:48 p.m.

I LOVE YOU VIRUS -- It's REAL - please read
Brian T. Cunningham -- Thursday, 4 May 2000, at 4:31 p.m.
1 message

Advice? Drilling Thru the Bow and Stern End Pours
Tim Stough -- Thursday, 4 May 2000, at 5:11 p.m.
12 messages -- Newest posted Tuesday, 9 May 2000, at 3:38 p.m.

Epoxy 101
Jack Martin -- Thursday, 4 May 2000, at 11:12 p.m.
5 messages -- Newest posted Monday, 8 May 2000, at 8:05 a.m.

RAKA questions
Tom Kurth -- Thursday, 4 May 2000, at 11:56 p.m.
5 messages -- Newest posted Sunday, 7 May 2000, at 11:35 a.m.

more questions
Tom Kurth -- Friday, 5 May 2000, at 10:50 p.m.
2 messages -- Newest posted Saturday, 6 May 2000, at 9:58 a.m.

There comes a time in every builders career....
Doug K -- Saturday, 6 May 2000, at 12:30 a.m.
8 messages -- Newest posted Monday, 8 May 2000, at 1:23 p.m.

A bunch of pics................
Doug K -- Saturday, 6 May 2000, at 12:59 a.m.
12 messages -- Newest posted Tuesday, 9 May 2000, at 6:14 p.m.

CDN source of Captain's varnish
Chris -- Saturday, 6 May 2000, at 1:43 a.m.
4 messages -- Newest posted Sunday, 7 May 2000, at 8:09 p.m.

Great Lakes Small Craft Symosium 3
Gerald McQuinn -- Saturday, 6 May 2000, at 10:31 a.m.
1 message

Ready to tape seams (How much 'Poxy?)
Bill Jankowski -- Saturday, 6 May 2000, at 11:39 p.m.
9 messages -- Newest posted Monday, 8 May 2000, at 10:03 p.m.

stitch and glue expedition single
Brandon Nelson -- Sunday, 7 May 2000, at 1:14 a.m.
15 messages -- Newest posted Tuesday, 9 May 2000, at 2:12 a.m.

Hatch Lip Question
Don Bobzien -- Sunday, 7 May 2000, at 10:21 a.m.
3 messages -- Newest posted Monday, 8 May 2000, at 3:58 p.m.

UK Hand Tools?
Nick Pinson -- Sunday, 7 May 2000, at 5:46 p.m.
2 messages -- Newest posted Sunday, 7 May 2000, at 6:54 p.m.

kayak covers
Quent -- Sunday, 7 May 2000, at 7:10 p.m.
9 messages -- Newest posted Wednesday, 10 May 2000, at 5:28 p.m.

anyone have expierience with bi/triaxials?
David Blodgett -- Sunday, 7 May 2000, at 7:13 p.m.
8 messages -- Newest posted Monday, 8 May 2000, at 5:37 p.m.

Yak Packin' or Kayak Cratin' :-)
Tim Stough -- Sunday, 7 May 2000, at 11:21 p.m.
9 messages -- Newest posted Thursday, 11 May 2000, at 9:54 a.m.

Can't Help Myself
Warren -- Sunday, 7 May 2000, at 11:37 p.m.
7 messages -- Newest posted Monday, 8 May 2000, at 9:25 p.m.

Kayak Time Warp MP3 (w/LInks)
Spidey -- Sunday, 7 May 2000, at 11:47 p.m.
3 messages -- Newest posted Tuesday, 9 May 2000, at 8:32 a.m.

design program
david -- Monday, 8 May 2000, at 1:16 p.m.
2 messages -- Newest posted Monday, 8 May 2000, at 9:12 p.m.

Varnish to Water how long?
Travis -- Monday, 8 May 2000, at 5:27 p.m.
2 messages -- Newest posted Monday, 8 May 2000, at 7:13 p.m.

Finally Done and paddled! *Pic*
Kent LeBoutillier -- Monday, 8 May 2000, at 6:18 p.m.
12 messages -- Newest posted Tuesday, 9 May 2000, at 5:02 p.m.

Another Lauan question
BStruss -- Monday, 8 May 2000, at 7:33 p.m.
7 messages -- Newest posted Wednesday, 10 May 2000, at 9:27 a.m.

Pygmy vs clc
Reed -- Monday, 8 May 2000, at 9:57 p.m.
12 messages -- Newest posted Tuesday, 23 May 2000, at 12:04 p.m.

bilge pump
LARRY OBENSHAIN -- Monday, 8 May 2000, at 10:09 p.m.
25 messages -- Newest posted Friday, 12 May 2000, at 10:52 a.m.

Kayak / Canoe / Bike Trailer *Pic*
Larry Thompson -- Monday, 8 May 2000, at 11:21 p.m.
2 messages -- Newest posted Tuesday, 9 May 2000, at 6:52 a.m.

dooky smutz
Ray Port Angeles -- Tuesday, 9 May 2000, at 12:37 a.m.
3 messages -- Newest posted Tuesday, 9 May 2000, at 10:54 a.m.

loss of feet blood circulation - why ?
Erez -- Tuesday, 9 May 2000, at 2:08 a.m.
34 messages -- Newest posted Thursday, 11 May 2000, at 12:29 p.m.

Finally started glassing the Guillemot 18
Shawn B -- Tuesday, 9 May 2000, at 11:42 a.m.
17 messages -- Newest posted Friday, 12 May 2000, at 10:48 a.m.

Plans for first wood-strip double seater kayak
RB -- Tuesday, 9 May 2000, at 11:45 a.m.
2 messages -- Newest posted Thursday, 11 May 2000, at 2:16 p.m.

Wet Sanding
Mike Mallabar -- Tuesday, 9 May 2000, at 12:10 p.m.
5 messages -- Newest posted Wednesday, 10 May 2000, at 8:45 a.m.

'glass types
Rick Lawler -- Tuesday, 9 May 2000, at 9:41 p.m.
1 message

Sanded Too Far??
Jim Owens -- Wednesday, 10 May 2000, at 12:21 a.m.
9 messages -- Newest posted Thursday, 11 May 2000, at 11:08 p.m.

Either Fish or Cut Strips! *Pic*
Joe Greenley -- Wednesday, 10 May 2000, at 2:57 a.m.
6 messages -- Newest posted Wednesday, 10 May 2000, at 8:50 p.m.

Varnish or drill first
Wayne R. -- Wednesday, 10 May 2000, at 6:05 a.m.
4 messages -- Newest posted Wednesday, 10 May 2000, at 7:52 p.m.

blotches after first epoxy coat
Addison M. -- Wednesday, 10 May 2000, at 5:57 p.m.
5 messages -- Newest posted Wednesday, 10 May 2000, at 11:17 p.m.

"Big Butts Up The River..."
James Neely -- Wednesday, 10 May 2000, at 9:35 p.m.
12 messages -- Newest posted Friday, 12 May 2000, at 8:01 a.m.

The Point *Pic*
Warren -- Wednesday, 10 May 2000, at 11:46 p.m.
1 message

He has a point there *Pic*
Warren -- Wednesday, 10 May 2000, at 11:51 p.m.
8 messages -- Newest posted Tuesday, 23 May 2000, at 11:42 a.m.

layup variation
Greg -- Thursday, 11 May 2000, at 2:05 a.m.
6 messages -- Newest posted Saturday, 13 May 2000, at 11:36 p.m.

Strange shine in my pine
Shawn B -- Thursday, 11 May 2000, at 11:45 a.m.
4 messages -- Newest posted Thursday, 11 May 2000, at 5:47 p.m.

Deck Stripping Question
Don Bobzien -- Thursday, 11 May 2000, at 12:10 p.m.
3 messages -- Newest posted Friday, 12 May 2000, at 5:08 a.m.

Going with 2-part poly clear
Dean Trexel -- Thursday, 11 May 2000, at 6:50 p.m.
14 messages -- Newest posted Sunday, 14 May 2000, at 12:43 p.m.

Some more pics...a canoe shelf *Pic*
Doug K -- Thursday, 11 May 2000, at 8:04 p.m.
4 messages -- Newest posted Friday, 12 May 2000, at 8:16 p.m.

Ultra light skin on frame kayak
Dale Frolander -- Thursday, 11 May 2000, at 9:33 p.m.
2 messages -- Newest posted Thursday, 11 May 2000, at 9:53 p.m.

Heatshrink dacron
Gary Pick -- Thursday, 11 May 2000, at 11:52 p.m.
5 messages -- Newest posted Saturday, 13 May 2000, at 1:49 a.m.

expedition single for the lady
Brandon Nelson -- Friday, 12 May 2000, at 12:34 a.m.
6 messages -- Newest posted Friday, 12 May 2000, at 2:12 p.m.

Some New Deck Progress *Pic*
Spidey -- Friday, 12 May 2000, at 2:02 a.m.
7 messages -- Newest posted Friday, 12 May 2000, at 4:38 p.m.

One of Nick's S&G's is born *Pic*
Matthew Bastian -- Friday, 12 May 2000, at 10:19 a.m.
18 messages -- Newest posted Friday, 19 May 2000, at 6:07 a.m.

New builder
RogerP -- Friday, 12 May 2000, at 10:24 a.m.
15 messages -- Newest posted Tuesday, 23 May 2000, at 11:52 a.m.

Baidarka triple plans
Kevin Stout -- Friday, 12 May 2000, at 11:35 a.m.
2 messages -- Newest posted Saturday, 13 May 2000, at 7:54 a.m.

To stain or not to stain
Bill H. -- Friday, 12 May 2000, at 12:02 p.m.
3 messages -- Newest posted Friday, 12 May 2000, at 10:24 p.m.

New Builder
RogerP -- Friday, 12 May 2000, at 12:05 p.m.
3 messages -- Newest posted Sunday, 14 May 2000, at 7:37 p.m.

System 3 Hull Paint
Larry Pfisterer -- Friday, 12 May 2000, at 1:15 p.m.
3 messages -- Newest posted Friday, 12 May 2000, at 5:25 p.m.

Smoothing inside of hull
Tim Shelburne -- Friday, 12 May 2000, at 2:15 p.m.
8 messages -- Newest posted Tuesday, 16 May 2000, at 3:26 p.m.

Take Canoe HOME from Work Day *Pic*
Travis -- Friday, 12 May 2000, at 2:54 p.m.
7 messages -- Newest posted Tuesday, 16 May 2000, at 7:10 p.m.

More pixs of Redbird *Pic*
Travis -- Friday, 12 May 2000, at 2:59 p.m.
2 messages -- Newest posted Friday, 12 May 2000, at 3:22 p.m.

Pickup shell
Don Bowen -- Friday, 12 May 2000, at 7:15 p.m.
12 messages -- Newest posted Monday, 15 May 2000, at 7:25 p.m.

Exp Single w/ wooden seat (pic) *Pic*
Dave Colant -- Friday, 12 May 2000, at 10:51 p.m.
4 messages -- Newest posted Friday, 12 May 2000, at 11:12 p.m.

Exp Single w/ me
Dave Colant -- Friday, 12 May 2000, at 11:17 p.m.
1 message

Spare Paddle
David Bryson -- Saturday, 13 May 2000, at 7:55 a.m.
3 messages -- Newest posted Saturday, 13 May 2000, at 8:23 p.m.

Dust Control
Roger Nuffer -- Saturday, 13 May 2000, at 5:39 p.m.
21 messages -- Newest posted Monday, 15 May 2000, at 11:24 p.m.

Another source (online) for boatbuilding books
Paul G. Jacobson -- Saturday, 13 May 2000, at 8:09 p.m.
1 message

Pinholes in final sanding
Dean Trexel -- Saturday, 13 May 2000, at 8:30 p.m.
4 messages -- Newest posted Sunday, 14 May 2000, at 11:32 a.m.

Outer Island gets baptized
Dean Trexel -- Saturday, 13 May 2000, at 9:07 p.m.
3 messages -- Newest posted Monday, 15 May 2000, at 6:59 p.m.

finaly got it out in some large chop
David Blodgett -- Sunday, 14 May 2000, at 12:03 p.m.
3 messages -- Newest posted Monday, 15 May 2000, at 8:08 a.m.

printed fabric use in fiberglass
BRETT ONNINK -- Sunday, 14 May 2000, at 3:14 p.m.
4 messages -- Newest posted Monday, 15 May 2000, at 7:57 p.m.

cockpit customizing
Ken Sutherland -- Sunday, 14 May 2000, at 5:39 p.m.
4 messages -- Newest posted Monday, 15 May 2000, at 3:08 p.m.

sailing rig
Brandon -- Sunday, 14 May 2000, at 7:18 p.m.
2 messages -- Newest posted Monday, 15 May 2000, at 12:01 p.m.

Varnish shelf life
Steve -- Monday, 15 May 2000, at 10:38 a.m.
5 messages -- Newest posted Tuesday, 16 May 2000, at 12:39 a.m.

Another maiden launch
Peter H -- Monday, 15 May 2000, at 11:49 a.m.
5 messages -- Newest posted Monday, 15 May 2000, at 6:34 p.m.

Ouch my poor boat
Jack Sanderson -- Monday, 15 May 2000, at 4:31 p.m.
2 messages -- Newest posted Monday, 15 May 2000, at 5:06 p.m.

Just say "No" to NBS
Shawn B -- Monday, 15 May 2000, at 4:50 p.m.
4 messages -- Newest posted Tuesday, 16 May 2000, at 8:05 a.m.

info on tribalance kayak
Paul Hunter Jr. -- Monday, 15 May 2000, at 5:31 p.m.
1 message

Re: Epoxy dangers, such as they are
Dean Trexel -- Monday, 15 May 2000, at 7:34 p.m.
5 messages -- Newest posted Wednesday, 17 May 2000, at 2:36 a.m.

Spectre
steve Koscica -- Tuesday, 16 May 2000, at 1:02 a.m.
2 messages -- Newest posted Tuesday, 16 May 2000, at 12:33 p.m.

sanding out small indentations between strips
Peter Patel-Schneider -- Tuesday, 16 May 2000, at 6:17 a.m.
3 messages -- Newest posted Tuesday, 16 May 2000, at 8:33 a.m.

Merganser in the Water!!
Greg Hicks -- Tuesday, 16 May 2000, at 9:19 a.m.
16 messages -- Newest posted Thursday, 18 May 2000, at 8:01 p.m.

skin boat coatings
Jay Babina -- Tuesday, 16 May 2000, at 10:26 a.m.
5 messages -- Newest posted Thursday, 18 May 2000, at 9:12 a.m.

Paddles *Pic*
Greg Hicks -- Tuesday, 16 May 2000, at 3:27 p.m.
6 messages -- Newest posted Wednesday, 17 May 2000, at 4:21 p.m.

Ultra-low volume kayaks
Berkeley C. -- Tuesday, 16 May 2000, at 6:49 p.m.
21 messages -- Newest posted Saturday, 20 May 2000, at 9:45 a.m.

ultralight BB
Buzz -- Tuesday, 16 May 2000, at 11:22 p.m.
2 messages -- Newest posted Wednesday, 17 May 2000, at 12:46 a.m.

AquaSub - OT *Pic*
Spidey -- Wednesday, 17 May 2000, at 1:13 a.m.
5 messages -- Newest posted Thursday, 18 May 2000, at 7:20 a.m.

System 3 Hull Paint (Repost)
Larry Pfisterer -- Wednesday, 17 May 2000, at 12:29 p.m.
2 messages -- Newest posted Wednesday, 17 May 2000, at 7:36 p.m.

Flotation Foam
Chris Dore -- Wednesday, 17 May 2000, at 1:13 p.m.
3 messages -- Newest posted Wednesday, 17 May 2000, at 1:24 p.m.

Kayak Trolling Setup
Nick Pinson -- Wednesday, 17 May 2000, at 2:33 p.m.
3 messages -- Newest posted Friday, 19 May 2000, at 1:37 p.m.

Re: Risk v precautions
Dean Trexel -- Wednesday, 17 May 2000, at 5:12 p.m.
1 message

Arctic Tern foot pegs
Michael Brokenshire -- Wednesday, 17 May 2000, at 7:06 p.m.
3 messages -- Newest posted Thursday, 18 May 2000, at 2:11 p.m.

Sanding after staining
Bill H. -- Wednesday, 17 May 2000, at 9:49 p.m.
5 messages -- Newest posted Friday, 19 May 2000, at 10:06 a.m.

Redwood Guillemot Double reaches the water May 14 *Pic*
Steve in San Diego -- Thursday, 18 May 2000, at 12:14 a.m.
20 messages -- Newest posted Monday, 22 May 2000, at 9:16 a.m.

Foot Brace Mounting - What do you think? *Pic*
Tim Stough -- Thursday, 18 May 2000, at 11:58 a.m.
10 messages -- Newest posted Friday, 19 May 2000, at 6:13 p.m.

Non-allergenic Epoxy
Doug Kuik -- Thursday, 18 May 2000, at 12:50 p.m.
3 messages -- Newest posted Friday, 19 May 2000, at 11:27 a.m.

Posting Pictures
Doyle -- Thursday, 18 May 2000, at 1:00 p.m.
3 messages -- Newest posted Friday, 19 May 2000, at 1:04 a.m.

Re: LEARN TO READ MSDS's
Dean Trexel -- Thursday, 18 May 2000, at 5:40 p.m.
2 messages -- Newest posted Thursday, 18 May 2000, at 5:53 p.m.

Hatch gasket question
larry -- Thursday, 18 May 2000, at 8:49 p.m.
4 messages -- Newest posted Friday, 19 May 2000, at 6:14 a.m.

1/8" Lauan source
David -- Thursday, 18 May 2000, at 11:34 p.m.
7 messages -- Newest posted Friday, 19 May 2000, at 4:08 p.m.

Squirt boats
Edward -- Friday, 19 May 2000, at 8:03 a.m.
4 messages -- Newest posted Saturday, 20 May 2000, at 10:39 a.m.

Sanding.
Levent Seker -- Friday, 19 May 2000, at 10:47 a.m.
4 messages -- Newest posted Friday, 19 May 2000, at 10:51 p.m.

Non-allergenic epoxies?
Doug Kuik -- Friday, 19 May 2000, at 7:16 p.m.
1 message

plainweave
Tom Kurth -- Friday, 19 May 2000, at 8:38 p.m.
3 messages -- Newest posted Friday, 19 May 2000, at 10:44 p.m.

choosing a kayak
MB Faulkner -- Friday, 19 May 2000, at 9:17 p.m.
6 messages -- Newest posted Sunday, 21 May 2000, at 9:58 p.m.

Rudder?
Heather -- Saturday, 20 May 2000, at 1:59 a.m.
11 messages -- Newest posted Tuesday, 23 May 2000, at 12:16 p.m.

Closed Cell Foam Buying Location?
Brion -- Saturday, 20 May 2000, at 7:59 p.m.
8 messages -- Newest posted Monday, 22 May 2000, at 10:19 p.m.

Balsa Wood
Vinmal245 -- Saturday, 20 May 2000, at 8:05 p.m.
1 message

end pour warning
ross beare -- Saturday, 20 May 2000, at 9:08 p.m.
3 messages -- Newest posted Sunday, 21 May 2000, at 10:48 p.m.

Lightweight End Pours
Bruce -- Saturday, 20 May 2000, at 9:37 p.m.
13 messages -- Newest posted Tuesday, 23 May 2000, at 8:39 p.m.

Fairing - high build primer or epoxy & fillers?
Chris in Cajun Country -- Saturday, 20 May 2000, at 11:16 p.m.
2 messages -- Newest posted Monday, 22 May 2000, at 9:17 a.m.

Outer Island completed -- Finally!
Dean Trexel -- Saturday, 20 May 2000, at 11:37 p.m.
3 messages -- Newest posted Monday, 22 May 2000, at 1:59 a.m.

epoxy on my ribs
Warren -- Sunday, 21 May 2000, at 3:20 p.m.
4 messages -- Newest posted Wednesday, 24 May 2000, at 11:47 a.m.

Tips, Tricks and Hints for aligning hull
Ed -- Sunday, 21 May 2000, at 5:04 p.m.
3 messages -- Newest posted Tuesday, 23 May 2000, at 9:14 a.m.

glassing problem
Ron Larson -- Sunday, 21 May 2000, at 5:11 p.m.
8 messages -- Newest posted Monday, 22 May 2000, at 2:10 a.m.

This took all the Guts I could muster . . . *Pic*
Spidey -- Sunday, 21 May 2000, at 5:21 p.m.
11 messages -- Newest posted Tuesday, 23 May 2000, at 10:38 a.m.

Kayak parts too long? *Pic*
Charles Cooper -- Sunday, 21 May 2000, at 7:57 p.m.
5 messages -- Newest posted Tuesday, 23 May 2000, at 12:23 a.m.

I had to peel off the glass!
Marcelo -- Sunday, 21 May 2000, at 8:41 p.m.
16 messages -- Newest posted Wednesday, 24 May 2000, at 12:31 p.m.

Freezing Epoxy - It Worked! (so far)
Tim Stough -- Monday, 22 May 2000, at 1:05 a.m.
3 messages -- Newest posted Monday, 22 May 2000, at 10:58 a.m.

Bulkheads
Doug Kuik -- Monday, 22 May 2000, at 10:44 a.m.
28 messages -- Newest posted Sunday, 28 May 2000, at 11:33 p.m.

Applying 'Glass
Ken Finger -- Monday, 22 May 2000, at 10:44 a.m.
2 messages -- Newest posted Monday, 22 May 2000, at 10:14 p.m.

using purpleheart??
pete czerpak -- Monday, 22 May 2000, at 12:41 p.m.
7 messages -- Newest posted Wednesday, 24 May 2000, at 9:40 p.m.

Minicel Foam
Kyle Knop -- Monday, 22 May 2000, at 1:17 p.m.
5 messages -- Newest posted Wednesday, 24 May 2000, at 11:10 p.m.

Clear coat over epoxy
WA Joe -- Monday, 22 May 2000, at 2:48 p.m.
2 messages -- Newest posted Monday, 22 May 2000, at 4:39 p.m.

End forms on the Guillemot single
Rick -- Monday, 22 May 2000, at 4:39 p.m.
2 messages -- Newest posted Monday, 22 May 2000, at 7:16 p.m.

Glassing the inside hull of a Pygmy Boat
David -- Monday, 22 May 2000, at 7:04 p.m.
1 message

Outer Island really does roll itself!
Dean Trexel -- Monday, 22 May 2000, at 8:28 p.m.
3 messages -- Newest posted Monday, 22 May 2000, at 9:55 p.m.

Re: LEARN TO READ MSDS's
Dean Trexel -- Monday, 22 May 2000, at 9:53 p.m.
1 message

Re: LEARN TO READ MSDS's
lee -- Monday, 22 May 2000, at 10:22 p.m.
1 message

Patch hole/ remove stripped screw
Steve Murch -- Monday, 22 May 2000, at 10:37 p.m.
2 messages -- Newest posted Tuesday, 23 May 2000, at 1:39 a.m.

layers of glass?
Don -- Monday, 22 May 2000, at 10:53 p.m.
15 messages -- Newest posted Friday, 26 May 2000, at 10:04 a.m.

hard-chine edges
Tom Kurth -- Monday, 22 May 2000, at 11:00 p.m.
5 messages -- Newest posted Wednesday, 24 May 2000, at 12:25 a.m.

Building from scratch
Lee -- Monday, 22 May 2000, at 11:18 p.m.
5 messages -- Newest posted Tuesday, 23 May 2000, at 11:43 p.m.

hatch cover upgrade?
Brandon -- Tuesday, 23 May 2000, at 2:17 a.m.
2 messages -- Newest posted Tuesday, 30 May 2000, at 10:20 p.m.

glass taping deck to hull hints??
pete czerpak -- Tuesday, 23 May 2000, at 9:53 a.m.
6 messages -- Newest posted Wednesday, 24 May 2000, at 7:44 a.m.

Building rowing shells
Steve K -- Tuesday, 23 May 2000, at 12:32 p.m.
2 messages -- Newest posted Wednesday, 24 May 2000, at 11:19 p.m.

CLC Patuxent 17.5 vs. ?
Grant -- Tuesday, 23 May 2000, at 3:49 p.m.
25 messages -- Newest posted Friday, 2 June 2000, at 11:36 a.m.

Additionn to ring
Ed Walshe - Dublin Ireland -- Wednesday, 24 May 2000, at 6:22 a.m.
7 messages -- Newest posted Thursday, 25 May 2000, at 7:18 p.m.

Band saw blade for cutting strips
Andreas Albat -- Wednesday, 24 May 2000, at 2:58 p.m.
4 messages -- Newest posted Saturday, 27 May 2000, at 11:43 p.m.

End pours and hull-deck fit
David -- Wednesday, 24 May 2000, at 3:32 p.m.
7 messages -- Newest posted Tuesday, 30 May 2000, at 3:13 p.m.

"spooned" "dihedral" ???
G. Snapp -- Wednesday, 24 May 2000, at 6:25 p.m.
7 messages -- Newest posted Thursday, 25 May 2000, at 7:40 p.m.

PIONIER sails
Rick Carlsen -- Wednesday, 24 May 2000, at 9:19 p.m.
2 messages -- Newest posted Sunday, 4 June 2000, at 5:58 a.m.

Just a warning from the wise
David Blodgett -- Wednesday, 24 May 2000, at 11:29 p.m.
5 messages -- Newest posted Tuesday, 30 May 2000, at 2:52 p.m.

Guillemot OR Spring Run?
Luus -- Thursday, 25 May 2000, at 2:12 p.m.
4 messages -- Newest posted Monday, 29 May 2000, at 2:50 a.m.

Hard at work?! *Pic*
Shawn B -- Thursday, 25 May 2000, at 2:43 p.m.
3 messages -- Newest posted Thursday, 25 May 2000, at 7:38 p.m.

What is the widest strip you have used?
Jon -- Thursday, 25 May 2000, at 3:49 p.m.
3 messages -- Newest posted Friday, 26 May 2000, at 1:02 a.m.

outer stem and stern
Aime in vancouver -- Friday, 26 May 2000, at 9:34 a.m.
7 messages -- Newest posted Wednesday, 31 May 2000, at 8:36 p.m.

San Diego Wooden Boat Show June 17, 18
Randy Ames -- Friday, 26 May 2000, at 10:19 a.m.
3 messages -- Newest posted Friday, 26 May 2000, at 4:19 p.m.

Home made wooden paddles?
BStruss -- Friday, 26 May 2000, at 10:22 a.m.
6 messages -- Newest posted Sunday, 28 May 2000, at 12:03 p.m.

Great Auk
John Schwab -- Friday, 26 May 2000, at 11:28 a.m.
3 messages -- Newest posted Saturday, 27 May 2000, at 10:20 a.m.

Mystic, CT Wood Boat Show June 23-25
John B. -- Friday, 26 May 2000, at 6:03 p.m.
9 messages -- Newest posted Monday, 29 May 2000, at 8:51 p.m.

Just Launched *Pic*
Jeff Fine -- Friday, 26 May 2000, at 6:20 p.m.
14 messages -- Newest posted Sunday, 28 May 2000, at 9:22 p.m.

throw bags
drew -- Friday, 26 May 2000, at 7:12 p.m.
4 messages -- Newest posted Tuesday, 30 May 2000, at 4:24 a.m.

Awesome Tool for Stitch & Glue Wiring
Brion in Seattle -- Friday, 26 May 2000, at 10:30 p.m.
7 messages -- Newest posted Tuesday, 30 May 2000, at 9:11 a.m.

Glass cut tips for hull bottom?
armin wendt -- Saturday, 27 May 2000, at 1:25 a.m.
1 message

Hull glassed, the end is near *Pic*
Greg -- Saturday, 27 May 2000, at 3:24 a.m.
2 messages -- Newest posted Saturday, 27 May 2000, at 8:21 p.m.

So close... *Pic*
Don Bobzien -- Saturday, 27 May 2000, at 10:20 a.m.
5 messages -- Newest posted Monday, 29 May 2000, at 11:49 a.m.

mounting a Feathercraft rudder
George Parker -- Saturday, 27 May 2000, at 9:30 p.m.
3 messages -- Newest posted Tuesday, 30 May 2000, at 1:23 p.m.

Glue Won't Stick
Mike Nicholson -- Saturday, 27 May 2000, at 11:20 p.m.
6 messages -- Newest posted Sunday, 28 May 2000, at 3:33 p.m.

Out the door...
Tim Stough -- Sunday, 28 May 2000, at 1:17 p.m.
1 message

wet willy kayaks
Karen -- Sunday, 28 May 2000, at 1:24 p.m.
2 messages -- Newest posted Sunday, 28 May 2000, at 3:15 p.m.

magic marker
Doug -- Sunday, 28 May 2000, at 4:25 p.m.
5 messages -- Newest posted Wednesday, 31 May 2000, at 8:26 p.m.

Coaming lip
Larry C. -- Sunday, 28 May 2000, at 5:19 p.m.
7 messages -- Newest posted Tuesday, 30 May 2000, at 12:02 a.m.

loose ends
Don -- Sunday, 28 May 2000, at 7:36 p.m.
2 messages -- Newest posted Sunday, 28 May 2000, at 9:44 p.m.

brads vs staples
DAN MOSLANDER -- Sunday, 28 May 2000, at 10:09 p.m.
9 messages -- Newest posted Tuesday, 30 May 2000, at 2:36 p.m.

Glassing inside the hull.....help!
Brandon -- Sunday, 28 May 2000, at 10:30 p.m.
8 messages -- Newest posted Tuesday, 30 May 2000, at 12:26 p.m.

Wrapping The Coaming Lip
Dwight Shelato -- Sunday, 28 May 2000, at 10:48 p.m.
5 messages -- Newest posted Monday, 29 May 2000, at 1:28 p.m.

Cheap Duct Tape
Brian Wegener -- Monday, 29 May 2000, at 12:52 a.m.
5 messages -- Newest posted Monday, 29 May 2000, at 11:40 p.m.

Bean Bag Seats
Nick Pinson -- Monday, 29 May 2000, at 6:02 a.m.
13 messages -- Newest posted Wednesday, 31 May 2000, at 5:31 p.m.

Scarfs on Millcreek 13
BStruss -- Monday, 29 May 2000, at 8:10 a.m.
7 messages -- Newest posted Saturday, 3 June 2000, at 8:36 p.m.

Fiberglassing the deck (part II)
Marcelo -- Monday, 29 May 2000, at 9:41 a.m.
5 messages -- Newest posted Wednesday, 31 May 2000, at 2:24 a.m.

Puddles Under Glass Inside Hull
Dwight -- Monday, 29 May 2000, at 6:49 p.m.
2 messages -- Newest posted Monday, 29 May 2000, at 8:13 p.m.

"ply-yak" visits a pond
Tom Kurth -- Monday, 29 May 2000, at 10:35 p.m.
6 messages -- Newest posted Tuesday, 30 May 2000, at 5:56 p.m.

Metal Skid Plates
BillS -- Tuesday, 30 May 2000, at 1:08 p.m.
16 messages -- Newest posted Friday, 2 June 2000, at 12:02 p.m.

Another double on the water - May 14 *Pic*
Derek -- Tuesday, 30 May 2000, at 1:35 p.m.
5 messages -- Newest posted Wednesday, 31 May 2000, at 5:29 p.m.

Arctic Tern hits the pool!
Chuck -- Tuesday, 30 May 2000, at 2:23 p.m.
5 messages -- Newest posted Thursday, 1 June 2000, at 12:30 a.m.

Money Instead of Fiberglass
Mike R. -- Tuesday, 30 May 2000, at 4:58 p.m.
1 message

Wood Flour - Flour?
Mike R. -- Tuesday, 30 May 2000, at 6:41 p.m.
3 messages -- Newest posted Tuesday, 30 May 2000, at 11:20 p.m.

Tern Deck Tapeing
Larry Pfisterer -- Tuesday, 30 May 2000, at 8:00 p.m.
6 messages -- Newest posted Wednesday, 31 May 2000, at 5:04 p.m.

More on in-dwelling epoxy use
Dean Trexel -- Tuesday, 30 May 2000, at 8:50 p.m.
2 messages -- Newest posted Friday, 2 June 2000, at 11:24 a.m.

Best way to fill cracks and gaps
Randy -- Tuesday, 30 May 2000, at 8:58 p.m.
4 messages -- Newest posted Monday, 5 June 2000, at 6:14 a.m.

New hatch idea to pass along *Pic*
Dean Trexel -- Tuesday, 30 May 2000, at 9:04 p.m.
3 messages -- Newest posted Wednesday, 31 May 2000, at 5:07 p.m.

What is "Wood Flour" ??
Randy -- Tuesday, 30 May 2000, at 9:10 p.m.
3 messages -- Newest posted Tuesday, 30 May 2000, at 11:27 p.m.

Pinched stern, a stairway to somewhere
Mitch Isoe -- Tuesday, 30 May 2000, at 10:29 p.m.
8 messages -- Newest posted Thursday, 1 June 2000, at 10:00 p.m.

Where to get wood flour
Randy -- Tuesday, 30 May 2000, at 10:33 p.m.
6 messages -- Newest posted Wednesday, 31 May 2000, at 10:10 a.m.

substitute for fairing filler
Tom Kurth -- Tuesday, 30 May 2000, at 11:25 p.m.
6 messages -- Newest posted Sunday, 4 June 2000, at 1:41 p.m.

tall paddler
Ken -- Tuesday, 30 May 2000, at 11:40 p.m.
1 message

Stain under epoxy question
Don Bobzien -- Wednesday, 31 May 2000, at 12:17 p.m.
4 messages -- Newest posted Thursday, 1 June 2000, at 10:21 a.m.

Which Kit? Pygmy v. CLC etc...
Nate -- Wednesday, 31 May 2000, at 1:44 p.m.
8 messages -- Newest posted Sunday, 4 June 2000, at 4:11 p.m.

Source for thin cotton gloves?
Spidey -- Thursday, 1 June 2000, at 12:20 a.m.
8 messages -- Newest posted Thursday, 1 June 2000, at 4:50 p.m.

Glassing the cockpit
Charles Cooper -- Thursday, 1 June 2000, at 12:44 a.m.
3 messages -- Newest posted Thursday, 1 June 2000, at 2:02 p.m.

looking for kayak sailing info
Erez -- Thursday, 1 June 2000, at 12:45 a.m.
7 messages -- Newest posted Monday, 5 June 2000, at 7:23 p.m.

Graphite powder hull coat
Brandon -- Thursday, 1 June 2000, at 2:34 a.m.
24 messages -- Newest posted Monday, 5 June 2000, at 9:00 a.m.

Which way is left
Rick -- Thursday, 1 June 2000, at 4:20 a.m.
9 messages -- Newest posted Monday, 5 June 2000, at 11:37 a.m.

Epoxy doesn't glue to polyethilene bags (tip)
Marcelo -- Thursday, 1 June 2000, at 7:54 a.m.
2 messages -- Newest posted Thursday, 1 June 2000, at 1:45 p.m.

Grain Orientation on Laminated Paddles
Brian Wegener -- Thursday, 1 June 2000, at 10:02 a.m.
4 messages -- Newest posted Friday, 2 June 2000, at 8:11 a.m.

Dacron Coating
Anand Nataraj -- Thursday, 1 June 2000, at 8:27 p.m.
4 messages -- Newest posted Friday, 2 June 2000, at 11:32 a.m.

Gloves came in handy (Deck Glassing) *Pic*
Spidey -- Thursday, 1 June 2000, at 10:17 p.m.
13 messages -- Newest posted Sunday, 4 June 2000, at 10:16 a.m.

Rubber bushing thingamabob request
Gary B. -- Thursday, 1 June 2000, at 10:31 p.m.
4 messages -- Newest posted Monday, 5 June 2000, at 10:57 a.m.

Premature Panic
Mike Nicholson -- Thursday, 1 June 2000, at 10:58 p.m.
1 message

Yakima footbraces
Charles Cooper -- Thursday, 1 June 2000, at 11:14 p.m.
3 messages -- Newest posted Friday, 2 June 2000, at 11:24 a.m.

extra 4 oz on hull
Brandon -- Friday, 2 June 2000, at 8:14 a.m.
7 messages -- Newest posted Saturday, 3 June 2000, at 11:33 p.m.

C&B machining with a single router
Greg Hughes -- Friday, 2 June 2000, at 9:02 a.m.
6 messages -- Newest posted Sunday, 4 June 2000, at 9:25 p.m.

roof rack
armand bassi -- Friday, 2 June 2000, at 1:32 p.m.
4 messages -- Newest posted Saturday, 3 June 2000, at 8:23 a.m.

I like it green please.
Hank -- Friday, 2 June 2000, at 3:38 p.m.
5 messages -- Newest posted Saturday, 3 June 2000, at 1:43 a.m.

not kayak related, but nice anyway...
Erez -- Saturday, 3 June 2000, at 12:43 a.m.
1 message

Getting started
Johan Kruger -- Saturday, 3 June 2000, at 4:25 a.m.
1 message

West Coast Wooden Kayak Rendezvous 2000 *Pic*
Joe Greenley -- Saturday, 3 June 2000, at 11:41 a.m.
1 message

finally finished
edgar kleindinst -- Saturday, 3 June 2000, at 2:55 p.m.
7 messages -- Newest posted Tuesday, 6 June 2000, at 8:01 a.m.

help - my feet fall asleep
Toni Lipton -- Saturday, 3 June 2000, at 8:08 p.m.
13 messages -- Newest posted Monday, 5 June 2000, at 9:21 p.m.

ISO info on this Kayak. *Pic*
RichEMTP -- Saturday, 3 June 2000, at 11:57 p.m.
2 messages -- Newest posted Sunday, 4 June 2000, at 12:01 a.m.

extra 4oz on hull panels
Brandon -- Sunday, 4 June 2000, at 2:01 a.m.
1 message

Kayak finally sees the sun . . . *Pic*
Spidey -- Sunday, 4 June 2000, at 12:02 p.m.
18 messages -- Newest posted Wednesday, 7 June 2000, at 12:06 p.m.

kayakoutfitting.com sells minicel
eric zitzow -- Sunday, 4 June 2000, at 1:28 p.m.
1 message

you might find this tip useful...
Erez -- Sunday, 4 June 2000, at 1:58 p.m.
1 message

coloring resin
Tom Kurth -- Sunday, 4 June 2000, at 2:45 p.m.
4 messages -- Newest posted Monday, 5 June 2000, at 9:42 p.m.

Sealing/Glassing Deck underside
EdG -- Sunday, 4 June 2000, at 4:58 p.m.
4 messages -- Newest posted Friday, 9 June 2000, at 5:05 p.m.

Great Lakes Small Craft Symosium 3
Gerald McQuinn -- Sunday, 4 June 2000, at 9:37 p.m.
1 message

boat polish, rubbing compound, etc.
David Walker -- Sunday, 4 June 2000, at 11:48 p.m.
5 messages -- Newest posted Wednesday, 7 June 2000, at 11:11 a.m.

Raised Grain
David -- Monday, 5 June 2000, at 11:05 a.m.
4 messages -- Newest posted Tuesday, 6 June 2000, at 3:23 p.m.

Little Auk strongback and forms
John Keydash -- Monday, 5 June 2000, at 11:08 a.m.
2 messages -- Newest posted Tuesday, 6 June 2000, at 11:21 a.m.

Wee Lassie II nearing completion *Pic*
Ross Leidy -- Monday, 5 June 2000, at 2:49 p.m.
3 messages -- Newest posted Tuesday, 6 June 2000, at 6:05 a.m.

Looking for a canoe/kayak storage structure design
Chris -- Monday, 5 June 2000, at 3:25 p.m.
3 messages -- Newest posted Thursday, 8 June 2000, at 7:16 p.m.

Re: lengthy expedition?
lee -- Monday, 5 June 2000, at 7:51 p.m.
2 messages -- Newest posted Monday, 5 June 2000, at 9:45 p.m.

Just a couple more weeks! *Pic*
Dwight -- Monday, 5 June 2000, at 9:40 p.m.
4 messages -- Newest posted Tuesday, 6 June 2000, at 8:56 p.m.

Bosch cordless batteries wanted
Don Bowen -- Monday, 5 June 2000, at 10:00 p.m.
7 messages -- Newest posted Wednesday, 7 June 2000, at 2:57 p.m.

First strip built *Pic*
Ralph -- Monday, 5 June 2000, at 10:19 p.m.
4 messages -- Newest posted Tuesday, 6 June 2000, at 8:22 a.m.

No fun... Just an Insurance question
armin wendt -- Tuesday, 6 June 2000, at 2:05 a.m.
8 messages -- Newest posted Tuesday, 6 June 2000, at 10:52 p.m.

kayak rack on a Taurus
garland reese -- Tuesday, 6 June 2000, at 10:12 a.m.
10 messages -- Newest posted Wednesday, 7 June 2000, at 9:52 p.m.

Fraying ends of fiberglass cloth
David -- Tuesday, 6 June 2000, at 11:25 a.m.
10 messages -- Newest posted Wednesday, 7 June 2000, at 6:36 p.m.

Locking up
David -- Tuesday, 6 June 2000, at 3:40 p.m.
6 messages -- Newest posted Tuesday, 6 June 2000, at 11:21 p.m.

Dreaded Fisheye
Spidey -- Tuesday, 6 June 2000, at 5:41 p.m.
30 messages -- Newest posted Thursday, 8 June 2000, at 5:36 p.m.

Yak Racks for Small Truck
Serpentgurl -- Tuesday, 6 June 2000, at 8:53 p.m.
9 messages -- Newest posted Thursday, 8 June 2000, at 2:10 a.m.

low profile deck line fittings, kid's seat
Grant Goltz -- Tuesday, 6 June 2000, at 11:01 p.m.
2 messages -- Newest posted Wednesday, 7 June 2000, at 9:21 a.m.

need some expert help...
Brandon -- Tuesday, 6 June 2000, at 11:39 p.m.
18 messages -- Newest posted Thursday, 8 June 2000, at 9:09 p.m.

Tool Tip
Dennis -- Wednesday, 7 June 2000, at 7:31 a.m.
2 messages -- Newest posted Wednesday, 7 June 2000, at 1:51 p.m.

Fisheyes, flat tires, and sunspots
lee -- Wednesday, 7 June 2000, at 8:23 a.m.
1 message

Installing a rudder on a CLC Chesapeake
Craig Christensen -- Wednesday, 7 June 2000, at 9:01 a.m.
3 messages -- Newest posted Wednesday, 7 June 2000, at 5:10 p.m.

kayak design advise needed
phil -- Wednesday, 7 June 2000, at 1:11 p.m.
2 messages -- Newest posted Wednesday, 7 June 2000, at 5:28 p.m.

Cutting strips - or burning them from the planks?
Greg Hughes -- Wednesday, 7 June 2000, at 8:33 p.m.
33 messages -- Newest posted Saturday, 10 June 2000, at 11:02 p.m.

Partially completed 17' Guillemot kayak kit 4 sale
Jon Stielstra -- Wednesday, 7 June 2000, at 9:38 p.m.
1 message

Achieving a fair surface finish
Spidey -- Thursday, 8 June 2000, at 12:44 a.m.
12 messages -- Newest posted Friday, 9 June 2000, at 8:55 a.m.

glassing the coaming question
peter czerpak -- Thursday, 8 June 2000, at 8:13 a.m.
15 messages -- Newest posted Friday, 9 June 2000, at 9:31 p.m.

Light spot on glass
David -- Thursday, 8 June 2000, at 10:51 a.m.
9 messages -- Newest posted Friday, 9 June 2000, at 3:42 p.m.

Tiny stitch and glue thought:
mike allen ---> -- Thursday, 8 June 2000, at 7:28 p.m.
10 messages -- Newest posted Monday, 12 June 2000, at 9:40 p.m.

Ready to Glass Should I seal coat first
Randy -- Friday, 9 June 2000, at 12:08 a.m.
9 messages -- Newest posted Tuesday, 13 June 2000, at 12:49 p.m.

New pictures
Dale Frolander -- Friday, 9 June 2000, at 3:28 a.m.
6 messages -- Newest posted Friday, 9 June 2000, at 12:45 p.m.

Pokomoke comments
David Grimshaw -- Friday, 9 June 2000, at 5:10 a.m.
3 messages -- Newest posted Friday, 9 June 2000, at 7:54 a.m.

Ross
Jason -- Friday, 9 June 2000, at 12:22 p.m.
12 messages -- Newest posted Monday, 12 June 2000, at 1:02 p.m.

Re: good thought:
Earl Bailey -- Friday, 9 June 2000, at 2:31 p.m.
1 message

INTRO & INPUT REQUESTED
BREW -- Friday, 9 June 2000, at 2:38 p.m.
3 messages -- Newest posted Monday, 12 June 2000, at 1:24 a.m.

light spots in fiberglass
EdG -- Friday, 9 June 2000, at 2:38 p.m.
6 messages -- Newest posted Saturday, 10 June 2000, at 1:51 a.m.

tiny stitch and glue reaction:
mike allen ---> -- Friday, 9 June 2000, at 3:08 p.m.
1 message

Need advice on Epoxy for WW helmets
sward -- Friday, 9 June 2000, at 4:16 p.m.
7 messages -- Newest posted Monday, 12 June 2000, at 2:44 a.m.

Hatch Construction Questions
Dwight -- Friday, 9 June 2000, at 9:45 p.m.
4 messages -- Newest posted Saturday, 10 June 2000, at 12:23 p.m.

Varnishing and temperatures
Nancy -- Saturday, 10 June 2000, at 7:03 a.m.
14 messages -- Newest posted Tuesday, 13 June 2000, at 8:19 a.m.

Wetsuit for short person
Nancy -- Saturday, 10 June 2000, at 7:06 a.m.
2 messages -- Newest posted Sunday, 11 June 2000, at 11:07 p.m.

bansawing wood strips
John Schwab -- Saturday, 10 June 2000, at 11:49 a.m.
3 messages -- Newest posted Monday, 12 June 2000, at 2:10 p.m.

Inner seam tip
Greg -- Saturday, 10 June 2000, at 4:03 p.m.
3 messages -- Newest posted Tuesday, 13 June 2000, at 1:31 a.m.

My Osprey Std. Is Done
Wayne R. -- Saturday, 10 June 2000, at 8:22 p.m.
2 messages -- Newest posted Monday, 12 June 2000, at 9:17 p.m.

Creating form drawings in Excel
david -- Saturday, 10 June 2000, at 8:40 p.m.
9 messages -- Newest posted Tuesday, 13 June 2000, at 3:20 p.m.

STRONGBACK
RM Dalton -- Saturday, 10 June 2000, at 10:35 p.m.
1 message

Advice for Varnish Drips/Sags
John B. -- Saturday, 10 June 2000, at 11:02 p.m.
11 messages -- Newest posted Monday, 12 June 2000, at 11:59 p.m.

fence question
Don Bowen -- Sunday, 11 June 2000, at 12:58 a.m.
7 messages -- Newest posted Monday, 12 June 2000, at 3:04 a.m.

Wooden Caribou?
Brian Nystrom -- Sunday, 11 June 2000, at 9:09 a.m.
1 message

Squeezin the deck
Don Beale -- Sunday, 11 June 2000, at 11:55 a.m.
4 messages -- Newest posted Monday, 12 June 2000, at 1:18 a.m.

Tide prediction software
Ken Barron -- Sunday, 11 June 2000, at 12:09 p.m.
3 messages -- Newest posted Friday, 16 June 2000, at 1:01 a.m.

Auk Ends
Mike Nicholson -- Sunday, 11 June 2000, at 2:39 p.m.
2 messages -- Newest posted Sunday, 11 June 2000, at 3:03 p.m.

SUB-ject INFO
Wayne G. -- Sunday, 11 June 2000, at 3:08 p.m.
1 message

Signing one's work
Wayne R. -- Sunday, 11 June 2000, at 4:01 p.m.
18 messages -- Newest posted Thursday, 15 June 2000, at 4:20 p.m.

Did I remember to say "Thanks!" ?
Spidey -- Sunday, 11 June 2000, at 5:05 p.m.
1 message

Table Saw Info: Comparison ( O.T. )
Rehd -- Sunday, 11 June 2000, at 8:24 p.m.
1 message

Pygmy Bow & Stern
Rick -- Monday, 12 June 2000, at 1:11 a.m.
4 messages -- Newest posted Monday, 12 June 2000, at 4:53 p.m.

Re: Need advice on Epoxy for WW helmets
Ian Johnston -- Monday, 12 June 2000, at 2:36 a.m.
1 message

wrinkles in fiberglass
Mike -- Monday, 12 June 2000, at 3:05 a.m.
4 messages -- Newest posted Monday, 12 June 2000, at 8:41 a.m.

sqeegie fill coat question
peter czerpak -- Monday, 12 June 2000, at 12:21 p.m.
11 messages -- Newest posted Thursday, 15 June 2000, at 8:31 a.m.

first strip built
Jason -- Monday, 12 June 2000, at 12:57 p.m.
3 messages -- Newest posted Monday, 12 June 2000, at 2:09 p.m.

Filling gaps with epoxy paste - quick question
Lars Durban -- Monday, 12 June 2000, at 4:21 p.m.
9 messages -- Newest posted Tuesday, 13 June 2000, at 3:15 p.m.

stems of a stip-built
Eric -- Monday, 12 June 2000, at 8:17 p.m.
13 messages -- Newest posted Wednesday, 14 June 2000, at 5:10 p.m.

Pygmy Bulkhead fitting questions...
skip -- Monday, 12 June 2000, at 8:26 p.m.
5 messages -- Newest posted Tuesday, 13 June 2000, at 2:04 p.m.

Best time to fill the weave
Paul C -- Monday, 12 June 2000, at 10:21 p.m.
6 messages -- Newest posted Tuesday, 13 June 2000, at 3:03 p.m.

Laun Plywood
Glen -- Monday, 12 June 2000, at 11:23 p.m.
8 messages -- Newest posted Wednesday, 14 June 2000, at 2:17 p.m.

Varnish application
Tom Davies -- Tuesday, 13 June 2000, at 12:08 a.m.
4 messages -- Newest posted Wednesday, 14 June 2000, at 5:10 p.m.

Who Needs Hardener?? ( O.T. )
Rehd -- Tuesday, 13 June 2000, at 1:27 a.m.
4 messages -- Newest posted Tuesday, 13 June 2000, at 10:38 a.m.

stripper - s&g - You glass them both
garth -- Tuesday, 13 June 2000, at 8:51 a.m.
9 messages -- Newest posted Thursday, 15 June 2000, at 11:51 p.m.

Razor billed auk
Chris -- Tuesday, 13 June 2000, at 12:01 p.m.
1 message

Source for "Cockleshell" kayak plans?
Patrick -- Tuesday, 13 June 2000, at 12:40 p.m.
2 messages -- Newest posted Tuesday, 13 June 2000, at 12:43 p.m.

Kevlar strip on S&G
Lorne Vaasjo -- Tuesday, 13 June 2000, at 12:41 p.m.
9 messages -- Newest posted Wednesday, 14 June 2000, at 2:25 p.m.

Hamilton Marine's fiberglass cloth.
Richard Boyle -- Tuesday, 13 June 2000, at 4:00 p.m.
8 messages -- Newest posted Wednesday, 14 June 2000, at 12:43 p.m.

Alaska
Grant -- Tuesday, 13 June 2000, at 4:06 p.m.
4 messages -- Newest posted Wednesday, 14 June 2000, at 6:08 p.m.

Kayak Ornament on Camper?
armin wendt -- Tuesday, 13 June 2000, at 6:44 p.m.
2 messages -- Newest posted Wednesday, 14 June 2000, at 8:06 p.m.

Choosing A Boat
Peter -- Tuesday, 13 June 2000, at 9:00 p.m.
3 messages -- Newest posted Tuesday, 13 June 2000, at 9:37 p.m.

spraying varnish
Brent Curtis -- Tuesday, 13 June 2000, at 9:45 p.m.
4 messages -- Newest posted Wednesday, 14 June 2000, at 9:50 a.m.

to Nick Schade-Great Book !!!!
ross beare -- Wednesday, 14 June 2000, at 12:25 a.m.
1 message

Experiences with Day Hatches
Gary B. -- Wednesday, 14 June 2000, at 2:12 a.m.
2 messages -- Newest posted Wednesday, 14 June 2000, at 9:23 a.m.

Coho Launched
Doyle -- Wednesday, 14 June 2000, at 8:55 a.m.
5 messages -- Newest posted Friday, 16 June 2000, at 8:27 a.m.

Order for stem installation
Eric -- Wednesday, 14 June 2000, at 9:47 a.m.
1 message

Epoxy systems, which so you prefer & why?
Bob H -- Wednesday, 14 June 2000, at 10:52 a.m.
22 messages -- Newest posted Thursday, 15 June 2000, at 5:58 p.m.

How many coats of Paint on the hull?
John David Fuller -- Wednesday, 14 June 2000, at 11:49 a.m.
7 messages -- Newest posted Thursday, 15 June 2000, at 11:49 p.m.

lee - whetstone paddle??
peter czerpak -- Wednesday, 14 June 2000, at 1:31 p.m.
12 messages -- Newest posted Friday, 16 June 2000, at 9:17 a.m.

Pricing a Kayak
Mark -- Wednesday, 14 June 2000, at 4:09 p.m.
9 messages -- Newest posted Thursday, 15 June 2000, at 2:51 a.m.

Can you?
Doug -- Wednesday, 14 June 2000, at 7:32 p.m.
7 messages -- Newest posted Thursday, 15 June 2000, at 1:57 a.m.

Doubtful
Will Brockman -- Wednesday, 14 June 2000, at 8:07 p.m.
3 messages -- Newest posted Thursday, 15 June 2000, at 10:20 a.m.

Outer Island on display *Pic*
Dean Trexel -- Wednesday, 14 June 2000, at 8:23 p.m.
9 messages -- Newest posted Thursday, 15 June 2000, at 3:12 p.m.

Composite Coaming *Pic*
Spidey -- Wednesday, 14 June 2000, at 8:52 p.m.
13 messages -- Newest posted Thursday, 15 June 2000, at 5:28 p.m.

Re: Pricing a concrete column
lee -- Wednesday, 14 June 2000, at 9:54 p.m.
1 message

glassing the deck
Brandon -- Thursday, 15 June 2000, at 1:50 a.m.
2 messages -- Newest posted Thursday, 15 June 2000, at 7:31 a.m.

Transporting kayaks: upright or inverted?
Chuck -- Thursday, 15 June 2000, at 10:52 a.m.
20 messages -- Newest posted Thursday, 15 June 2000, at 10:18 p.m.

KAYAK DESIGN WATER LINE
Glen -- Thursday, 15 June 2000, at 12:10 p.m.
1 message

wood question
jay roberts -- Thursday, 15 June 2000, at 12:55 p.m.
3 messages -- Newest posted Thursday, 15 June 2000, at 4:16 p.m.

Shop Notes
Jeff Fine -- Thursday, 15 June 2000, at 3:50 p.m.
9 messages -- Newest posted Friday, 16 June 2000, at 9:00 a.m.

blush vs. thinner
Tom preska -- Thursday, 15 June 2000, at 3:54 p.m.
3 messages -- Newest posted Friday, 16 June 2000, at 2:24 a.m.

pictures of bottoms (of boats)
Gordon -- Thursday, 15 June 2000, at 5:38 p.m.
5 messages -- Newest posted Thursday, 15 June 2000, at 10:17 p.m.

Bevelling first strip
Mike Nicholson -- Thursday, 15 June 2000, at 8:44 p.m.
4 messages -- Newest posted Friday, 16 June 2000, at 12:05 a.m.

Bow abd stern pictures
Phil Holloway -- Friday, 16 June 2000, at 12:00 a.m.
2 messages -- Newest posted Friday, 16 June 2000, at 8:59 a.m.

Typo
Phil Holloway -- Friday, 16 June 2000, at 12:58 a.m.
1 message

Deck line layout
Gary B. -- Friday, 16 June 2000, at 1:33 a.m.
1 message