| |
KBBS Archive 10,000
A venting question!
Posted By: mike allen In Response To: Re: A Snap Tight Lipped Silicone Seal (Robert Woodard)
Date: Thursday, 18 November 1999, at 6:55 p.m.
> Be careful about creating an airtight seal. As your yak heats up the air
> can cause great presure to build up inside. If you use bungie to hold the
> covers on, the air can probably push it enough to vent, but when it starts
> to cool you have the opposite problem (large vacuum).> Some commercial manufactures have started putting a pin hole in their
> bulkheads to prevent VCP hatches from popping off or collapsing inward.> Woody
It has to be airtight in order to use the huge weightless foot pump idea!!!!!
(I would vent it of course w/ up and down tubes thru the bulkhead)
-mick
| |
KBBS Archive 10,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.