This archive is sponsored by Guillemot Kayaks . Go to the active forum to post new messages.

[ View Thread ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

KBBS Archive 00,000

Re: George Roberts' Sealing Technique

Posted By: Mark Kanzler
Date: Monday, 17 August 1998, at 1:41 p.m.

In Response To: Re: George Roberts' Sealing Technique (Jay Babina)

A thoght occured to me. If one were to heat up the wood immediately befor applying the first epoxy (whether seal coat or not), as the wood cools it should draw the liquid epoxy into its pores. This would impregnate the wood to a greater extent, which may give too much weight for the added strength.

Comments?

> To add to the confusion, I like to use a very open weave cloth.
> I did a few experiments when I first started working with epoxy and
> glass. When I tested fine weave cloth (like pantyhose material) I
> would easily tear off test panels where the normal weave cloth was
> tough. I think two things are at play here. 1. The open weave cloth
> allows epoxy to penitrate more easily through the cloth into the wood.
> 2 the more open weave cloth allows for a better bite of the hardened
> epoxy to the cloth.

> If you stretch some cloth across a frame you can easily see how
> much epoxy comes through the cloth on a wet out. As I said above,
> I don't just want to wet out the cloth, I want to also wet out the
> wood. This is why I believe in laying on the epoxy and squeeging of
> the extra later and bring the cloth down close to the wood contact
> ...after the wood soaks all it will take.

> If you really want to go nuts with this, you could do a few test
> panels with both prior wetting of the wood and wetting the cloth at
> one shot. I believe so much of this has to do with the cloth and epoxy
> viscosity and not starving the wood. Also, I no longer sand with anything
> finer than 100 grit paper.

> As far as Sys III's book. With all due respect, they're chemist
> who conduct some testing. Once they build 40 strip built boats and
> have years to watch how they hold up, they will have to share findings
> with the people who have done exactly that. Epoxy is not the only
> thing affecting all of this.

Messages In This Thread

George Roberts' Sealing Technique
John Pane -- Saturday, 15 August 1998, at 12:54 a.m.
Re: George Roberts' Sealing Technique
jim champoux -- Friday, 14 August 1998, at 1:42 p.m.
Re: George Roberts' Sealing Technique
Mike Scarborough -- Friday, 14 August 1998, at 6:35 p.m.
Re: George Roberts' Sealing Technique
jim champoux -- Monday, 17 August 1998, at 9:48 a.m.
Re: George Roberts' Sealing Technique
Nick Schade -- Friday, 14 August 1998, at 1:46 p.m.
Re: George Roberts' Sealing Technique
NPenney -- Friday, 14 August 1998, at 2:15 p.m.
bubbles under glass
Paul Stomski -- Friday, 14 August 1998, at 3:08 p.m.
Re: bubbles under glass
Mike Scarborough -- Friday, 14 August 1998, at 6:39 p.m.
Re: bubbles under glass
Nick Schade -- Friday, 14 August 1998, at 8:48 p.m.
Re: George Roberts' Sealing Technique
Jay Babina -- Saturday, 15 August 1998, at 11:07 a.m.
Re: George Roberts' Sealing Technique
L.C. -- Saturday, 15 August 1998, at 5:42 p.m.
Re: George Roberts' Sealing Technique
Jay Babina -- Monday, 17 August 1998, at 9:56 a.m.
Re: George Roberts' Sealing Technique
Mark Kanzler -- Monday, 17 August 1998, at 1:41 p.m.
Re: George Roberts' Sealing Technique
Nick Schade -- Monday, 17 August 1998, at 2:34 p.m.

[ View Thread ] [ Return to Index ] [ Read Prev Msg ] [ Read Next Msg ]

KBBS Archive 00,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.

 Guillemot | SEE Kayak Directory | Kayak Forum

The Kayak Forum is Sponsored By

Guillemot Kayaks

Guillemot Kayaks