KBBS Archive 00,000

Re: Fittings are just long enough for 3/16" strips

Posted By: Scotty
Date: Monday, 17 August 1998, at 12:43 a.m.

In Response To: Re: Fittings are just long enough for 3/16" strips (Mark Kanzler)

> Picture Below

That's where my mind was headed... could fill cavity with wax, sand top smooth, clean wax off rim, and glass/epoxy over. Should end up with nice flush mount after carefully trimming glass off inner rim and cleaning out wax carefully with tongue depressor and hair dryer. In theory, Mark, you're vicariously involved in a lot of boats. Always a theorotician, never a boatman!.. TNX, Scotty

Messages In This Thread

VCP Hatches On Chesapeake Kayaks
Bobby Curtis -- Friday, 31 July 1998, at 2:31 p.m.

Re: VCP Hatches On Chesapeake Kayaks
CHad -- Friday, 31 July 1998, at 3:14 p.m.

Re: VCP Hatches On Chesapeake Kayaks
Bobby Curtis -- Tuesday, 4 August 1998, at 8:38 a.m.

Re: VCP Hatches On Chesapeake Kayaks
Mike Scarborough -- Friday, 31 July 1998, at 5:18 p.m.

Re: VCP Hatches On Chesapeake Kayaks
Bobby Curtis -- Tuesday, 4 August 1998, at 8:51 a.m.

similar hatch problem and solution
Pete Ford -- Saturday, 1 August 1998, at 7:40 p.m.

Re: similar hatch problem and solution
Martin Foil -- Monday, 3 August 1998, at 9:06 a.m.

Re: beautiful work
Ross Leidy -- Monday, 3 August 1998, at 10:21 a.m.

Almost in the water
Pete Ford -- Tuesday, 4 August 1998, at 12:56 a.m.

Re: similar hatch problem and solution
Jay Babina -- Monday, 3 August 1998, at 4:38 p.m.

Re: similar hatch problem and solution
Bobby Curtis -- Tuesday, 4 August 1998, at 8:57 a.m.

Answers to size, material, and building method
Pete Ford -- Tuesday, 4 August 1998, at 8:08 p.m.

Re: Answers to size, material, and building method
Bobby Curtis -- Tuesday, 4 August 1998, at 11:06 p.m.

Re: Pete's Kayak Konstruction Zone Website.
Mark Kanzler -- Wednesday, 5 August 1998, at 10:41 a.m.

Re: Jay Babina's VCP hatch method.
Nick Schade -- Wednesday, 5 August 1998, at 3:33 p.m.

Recessed Deck Line Fittings?
Nick Schade -- Wednesday, 5 August 1998, at 3:42 p.m.

I Like the Recessed Deck Fittings!
Pete Ford -- Wednesday, 5 August 1998, at 7:54 p.m.

Re: I Like the Recessed Deck Fittings!
Nick Schade -- Thursday, 6 August 1998, at 5:23 p.m.

Re: I Like the Recessed Deck Fittings!
Mark Kanzler -- Thursday, 6 August 1998, at 5:38 p.m.

Fittings are just long enough for 3/16" strips
Pete Ford -- Thursday, 6 August 1998, at 6:10 p.m.

Re: Fittings are just long enough for 3/16" strips
Mark Kanzler -- Thursday, 6 August 1998, at 6:17 p.m.

Re: Fittings are just long enough for 3/16" strips
Mark Kanzler -- Sunday, 16 August 1998, at 10:40 a.m.

Re: Show off!
Ross Leidy -- Sunday, 16 August 1998, at 10:37 p.m.

Re: Fittings are just long enough for 3/16" strips
Scotty -- Monday, 17 August 1998, at 12:43 p.m.

Re: Fittings are just long enough for 3/16" strips
Mark Kanzler -- Tuesday, 18 August 1998, at 12:04 a.m.

Re: Another Recessed Deck Fitting!
Mark Kanzler -- Tuesday, 11 August 1998, at 10:40 a.m.

Re: I Like the Recessed Deck Fittings!
Bobby Curtis -- Saturday, 15 August 1998, at 8:44 p.m.

Re: I Like the Recessed Deck Fittings!
Bobby Curtis -- Saturday, 15 August 1998, at 8:47 p.m.

Vitudden contact info
Pete Ford -- Monday, 24 August 1998, at 5:33 p.m.

KBBS Archive 00,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.