KBBS Archive 00,000

Re: Fittings are just long enough for 3/16" strips

Posted By: Mark Kanzler
Date: Thursday, 6 August 1998, at 6:17 p.m.

In Response To: Fittings are just long enough for 3/16" strips (Pete Ford)

You could spotface the hole on the outside and meke them flush or slightly below. If you do it before laying any of the glass cloth (plan ahead?), it would be less, though still alot of work. Spotfacing the inside would be easier due to the less visible location, but not as elegant.

> I used 3/16" strips with 6oz cloth inside and outside and
> they were just long enough to get the nut on the threads firmly. If
> you used 1/4" strips they might still work or might not - it
> was pretty close.

Messages In This Thread

VCP Hatches On Chesapeake Kayaks
Bobby Curtis -- Friday, 31 July 1998, at 2:31 p.m.

Re: VCP Hatches On Chesapeake Kayaks
CHad -- Friday, 31 July 1998, at 3:14 p.m.

Re: VCP Hatches On Chesapeake Kayaks
Bobby Curtis -- Tuesday, 4 August 1998, at 8:38 a.m.

Re: VCP Hatches On Chesapeake Kayaks
Mike Scarborough -- Friday, 31 July 1998, at 5:18 p.m.

Re: VCP Hatches On Chesapeake Kayaks
Bobby Curtis -- Tuesday, 4 August 1998, at 8:51 a.m.

similar hatch problem and solution
Pete Ford -- Saturday, 1 August 1998, at 7:40 p.m.

Re: similar hatch problem and solution
Martin Foil -- Monday, 3 August 1998, at 9:06 a.m.

Re: beautiful work
Ross Leidy -- Monday, 3 August 1998, at 10:21 a.m.

Almost in the water
Pete Ford -- Tuesday, 4 August 1998, at 12:56 a.m.

Re: similar hatch problem and solution
Jay Babina -- Monday, 3 August 1998, at 4:38 p.m.

Re: similar hatch problem and solution
Bobby Curtis -- Tuesday, 4 August 1998, at 8:57 a.m.

Answers to size, material, and building method
Pete Ford -- Tuesday, 4 August 1998, at 8:08 p.m.

Re: Answers to size, material, and building method
Bobby Curtis -- Tuesday, 4 August 1998, at 11:06 p.m.

Re: Pete's Kayak Konstruction Zone Website.
Mark Kanzler -- Wednesday, 5 August 1998, at 10:41 a.m.

Re: Jay Babina's VCP hatch method.
Nick Schade -- Wednesday, 5 August 1998, at 3:33 p.m.

Recessed Deck Line Fittings?
Nick Schade -- Wednesday, 5 August 1998, at 3:42 p.m.

I Like the Recessed Deck Fittings!
Pete Ford -- Wednesday, 5 August 1998, at 7:54 p.m.

Re: I Like the Recessed Deck Fittings!
Nick Schade -- Thursday, 6 August 1998, at 5:23 p.m.

Re: I Like the Recessed Deck Fittings!
Mark Kanzler -- Thursday, 6 August 1998, at 5:38 p.m.

Fittings are just long enough for 3/16" strips
Pete Ford -- Thursday, 6 August 1998, at 6:10 p.m.

Re: Fittings are just long enough for 3/16" strips
Mark Kanzler -- Thursday, 6 August 1998, at 6:17 p.m.

Re: Fittings are just long enough for 3/16" strips
Mark Kanzler -- Sunday, 16 August 1998, at 10:40 a.m.

Re: Show off!
Ross Leidy -- Sunday, 16 August 1998, at 10:37 p.m.

Re: Fittings are just long enough for 3/16" strips
Scotty -- Monday, 17 August 1998, at 12:43 p.m.

Re: Fittings are just long enough for 3/16" strips
Mark Kanzler -- Tuesday, 18 August 1998, at 12:04 a.m.

Re: Another Recessed Deck Fitting!
Mark Kanzler -- Tuesday, 11 August 1998, at 10:40 a.m.

Re: I Like the Recessed Deck Fittings!
Bobby Curtis -- Saturday, 15 August 1998, at 8:44 p.m.

Re: I Like the Recessed Deck Fittings!
Bobby Curtis -- Saturday, 15 August 1998, at 8:47 p.m.

Vitudden contact info
Pete Ford -- Monday, 24 August 1998, at 5:33 p.m.

KBBS Archive 00,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.