KBBS Archive 00,000

Cockpit Coaming wood

Posted By: Larry
Date: May 30, 1997 at 16:36:48

I'm just about ready to fit the cockpit coaming using the "stacked donut ring" style. I'm using a total of 4 layers with the top a greater circumferance than the other 3. The wood I'm using is quarter inch thick birch plywood. I'm staining it walnut so it will go with the dark cedar strips that act as accent stipes on my kayak (Endeavor 17). My question is birch plywood an acceptable wood to use? Unfortunately, Okume plywood is nowhere to be had in Central New York. Please advise here on this message board.

---

Messages In This Thread

Cockpit Coaming wood
Larry -- Friday, 31 October 1997, at 9:32 a.m.

Re: Cockpit Coaming wood
Nick -- Friday, 31 October 1997, at 9:32 a.m.

KBBS Archive 00,000 is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.